Clay mineral weathering and contaminant dynamics in a caustic aqueous system: I. Wet chemistry and aging effects

Caustic high level radioactive waste induces mineral weathering reactions that can influence the fate of radionuclides released in the vicinity of leaking storage tanks. The uptake and release of Cs^I and Sr^II were studied in batch reactors of 2:1 layer-type silicates—illite (Il), vermiculite (Vm) and montmorillonite (Mt)—under geochemical conditions characteristic of leaking tank waste at the Hanford Site in WA (0.05 m Al_T, 2 m Na⁺, 1 m NO₃⁻, pH ∼14, Cs and Sr present as co-contaminants). Time series (0 to 369 d) experiments were conducted at 298 K, with initial [Cs]₀ and [Sr]₀ concentrations from 10⁻⁵ to 10⁻³ mol kg⁻¹. Clay mineral type affected the rates of (i) hydroxide promoted dissolution of Si, Al and Fe, (ii) precipitation of secondary solids and (iii) uptake of Cs and Sr. Initial Si release to solution followed the order Mt > Vm > Il. An abrupt decrease in soluble Si and/or Al after 33 d for Mt and Vm systems, and after 190 d for Il suspensions was concurrent with accumulation of secondary aluminosilicate precipitates. Strontium uptake exceeded that of Cs in both rate and extent, although sorbed Cs was generally more recalcitrant to subsequent desorption and dissolution. After 369 d reaction time, reacted Il, Vm and Mt solids retained up to 17, 47 and 14 mmol kg⁻¹ (0.18, 0.24 and 0.02 μmol m⁻²) of Cs, and 0, 27 and 22 mmol kg⁻¹ (0, 0.14 and 0.03 μmol m⁻²) Sr, respectively, which were not removed in subsequent Mg exchange or oxalic acid dissolution reactions. Solubility of Al and Si decreased with initial Cs and Sr concentration in Mt and Il, but not in Vm. High co-contaminant sorption to the Vm clay, therefore, appears to diminish the influence of those ions on mineral transformation rates.     

Diagenesis of oxyanions (V, U, Re, and Mo) in pore waters and sediments from a continental margin

This research tests the hypothesis that trace metals respond to the extent of reducing conditions in a predictable way. We describe pore water and sediment measurements of iron (Fe), manganese (Mn), vanadium (V), uranium (U), rhenium (Re), and molybdenum (Mo) along a transect off Washington State (USA). Sediments become less reducing away from the continent, and the stations have a range of oxygen penetration depths (depth to unmeasurable O₂ concentration) varying from a few millimeters to five centimeters. When oxygen penetrates ∼1 cm or less, Fe is reduced in the pore waters but reoxidized near the sediment-water interface, preventing a flux of Fe²⁺ to overlying waters, whereas Mn oxides are reduced and Mn²⁺ diffuses to overlying waters. Both Re and U authigenically accumulate in sediments. Only at the most reducing location, where the oxygen penetrates 0.3 cm below the sediment-water interface, does the surface 30 cm of sediments become reducing enough to authigenically accumulate Mo.Stations in close proximity to the Juan de Fuca Ridge crest are enriched in Mn and Fe from hydrothermal plume processes. Both V and Mo clearly associate with Mn cycling, whereas U may be associating with either Mn oxides and/or Fe oxyhydroxides. Rhenium is uncomplicated by adsorption to Mn oxides and/or Fe oxyhydroxides, and Re accumulation in sediments appears to be due solely to the extent of reducing conditions. Therefore, authigenic sediment Re enrichment appears to be the best indicator for intermediate reducing conditions, where oxygen penetrates less than ∼1 cm below the sediment-water interface, when coupled with negligible authigenic Mo enrichment.     

Genetic Environment of the Intrusion-related Yuryang Au-Te Deposit in the Cheonan Metallogenic Province, Korea

Abstract. The Yuryang gold deposit, comprising a Te‐bearing Au‐Ag vein mineralization, is located in the Cheonan area of the Republic of Korea. The deposit is hosted in Precambrian gneiss and closely related to pegmatite. The mineralized veins display massive quartz textures, with weak alteration adjacent to the veins. The ore mineralization is simple, with a low Ag/Au ratio of 1.5:1, due to the paucity of Ag‐phases. Ore mineralization took place in two different mineral assemblages with paragenetic time; early Fe‐sulfide mineralization and late Fe‐sulfide and Au‐Te mineralization. The early Fe‐sulfide mineralization (pyrite + sphalerite) occurred typically along the vein margins, and the subsequent Au‐Te mineralization is characterized by fracture fillings of galena, sphalerite, pyrrhotite, Te‐bearing minerals (petzite, altaite, hessite and Bi‐Te mineral) and electrum. Fluid inclusions characteristically contain CO₂ and can be classified into four types (Ia, Ib, IIa and IIb) according to the phase behavior. The pressure corrected temperatures (≥500d?C) indicate that the deposit was formed at a distinctively high temperature from fluids with moderate to low salinity (<12 wt% equiv. NaCl) and CH₄ (1?22 mole %). The sphalerite geo‐barometry yield an estimated pressure about 3.5 ?2.1 kbar. The dominant ore‐deposition mechanisms were CO₂ effervescence and concomitant H₂S volatilization, which triggered sulfidation and gold mineralization. The measured and calculated isotopic compositions of fluids (δ¹⁸O_H2^O = 10.3 to 12.4 %o; δD_H2^O = ‐52 to ‐77 %o) may indicate that the gold deposition originated from S‐type magmatic waters. The physicochemical conditions observed in the Yuryang gold deposit indicate that the Jurassic gold deposits in the Cheonan area, including the Yuryang gold deposit are compatible with deposition of the intrusion‐related Au‐Te veins from deeply sourced fluids generated by the late Jurassic Daebo magmatism.     

Analysis of sinkhole occurrences over abandoned mines using fuzzy reasoning: a case study

In Korea most of the old mine workings were worked with room and pillar method or sublevel caving method and today they possess great possibility of surface subsidence especially for shallow depth mines. In most of the cases, mine roadways, rooms and pillars are irregular in shape and information about the local geology is uncertain. For these reasons, it is difficult to standardize the estimating method of subsidence especially sinkhole type over abandoned mine area. This paper describes the application procedure for the fuzzy reasoning techniques to analyze the possibility of sinkhole occurrences over abandoned mines. This technique is implemented in software which can simplify the analysis procedure and present the possibility of sinkhole subsidence without having precise information about local geological/mining conditions. This technique has been applied to forecast sinkhole possibilities at Bonghwa site where a massive sinkhole has already been occurred.     

Turbulence modeling of compound open-channel flows with and without vegetation on the floodplain using the Reynolds stress model

A Reynolds stress model for the numerical simulation of compound open-channel flows with vegetation on the floodplain is described. The Reynolds stress model consists of various sub-models such as Speziale et al.’s model, Mellor and Herring’s model, and Rotta’s model for the pressure–strain correlation term, the turbulent diffusion term, and the dissipation term, respectively. For validation of the model, plain compound open-channel flows are simulated. The computed results were compared with measured data by [Tominaga A, Nezu I. Turbulent structure in compound open-channel flows. J Hydraul Eng, ASCE 1991;117(1):21–41] and the results show that the Reynolds stress model successfully simulates the mean flow and turbulence structure of plain compound channel flows. The model was then applied to compound open-channel flows with vegetated floodplains. Good agreement between the simulated results and data from an algebraic stress model by [Naot D, Nezu I, Nakagawa H. Hydrodynamic behavior of partly vegetated open channels. J Hydraul Eng, ASCE 1996;122(11):625–33] was found. However, it was shown that the RSM is capable of predicting the velocity dip and lateral shift in the maximum streamwise velocity, which were not observed in the data from algebraic stress modeling. Finally, a depth-averaged analysis of the streamwise momentum equation was performed to investigate the lateral momentum transfer in compound channel flows with vegetated floodplains. Compared with components by the secondary currents and Reynolds stress, the drag force due to the presence of vegetation appears to be a factor in reducing the bottom shear stress in both main channel and floodplain.     

Distribution of Cs and Pu in the surface waters of the East Sea (Sea of Japan)

Surface and subsurface water samples for ¹³⁷Cs and ^239,240Pu analysis were collected in the East Sea (Sea of Japan) during August 1993. The ¹³⁷Cs levels of the surface waters are quite homogeneous in the East Sea (average = 3.1±0.2 mBq kg⁻¹). The ^239,240Pu levels vary from 6 to 10 μBq kg⁻¹ in the surface. ^239,240Pu to ¹³⁷Cs ratios in the surface water are within 0.002 to 0.003. The East Sea may be regarded as a part of the North Pacific Ocean in terms of ¹³⁷Cs dispersal in the surface, where the ¹³⁷Cs contents of the surface seawater seem to be controlled primarily by the atmospheric input. However, since our sampling was made just two months prior to the widely publicized Russian dumping incident on the 17th October 1993, our measurements may provide background data to assess the immediate impact of the Russian dumping on the levels of ¹³⁷Cs and ^239,240Pu in the East Sea.     

Genetic environment of germanium-bearing gold-silver vein ores from the Wolyu mine,Republic of Korea

The Wolyu mine is one of the largest vein-type gold-silver-bearing epithermal systems in the Youngdong district and is the first gold-silver deposit in Korea found to contain significant germanium, in the form of argyrodite (Ag₈GeS₆). Mineralized veins (78.9 ± 1.2 Ma) crosscutting Late Cretaceous hostrock tuff and quartz porphyry (81.5 ± 1.8 Ma) consist of three stages of quartz and carbonates, the first of which contains pyrite, basemetal sulfides and Au-Ag-minerals. Stage I Au-Ag-Ge-mineralized veins show a systematic variation of mineral assemblage with time: (1) quartz + pyrite; (2) quartz + pyrite + sphalerite + electrum + argentite; (3) carbonate + quartz + sphalerite + electrum + argentite; (4) carbonate + native silver + argentite + Ag-sulfosalts + argyrodite + sphalerite. Calculated values of temperature and sulfur activity are: assemblage (1), 360-280°C and 10^–7-10^–10; (2), 280-210°C and 10^–10-10^–14; (3), 210-180°C and 10^–14-10^–16; (4), 180-155°C and 10^–17-10^–18. These data, the frequent association of gold with sulfides, and the abundance of pyrite in alteration zones indicate that decreasing sulfur activity and cooling were important in triggering gold deposition. Hydrogen and oxygen isotope compositions of ore fluids display a systematic variation with increasing time. Within the main Ag-Au-Ge mineralization, D and ¹⁸O values decrease with the transition from quartz to carbonate deposition (from -78 and –2.8% to –90 and –8.7%., respectively), indicating increasing involvement (mixing) of less evolved meteoric water which resulted in progressive cooling and dilution of ore fluids in the shallow ( 370–600 m) Wolyu epithermal system.     

Radiaxial fibrous calcites as low-magnesian calcite cement precipitated in a marine-meteoric mixing zone

Abstract Radiaxial fibrous calcite (RFC) has previously been interpreted as a marine or replacive cement. Study of the Dongjeom Formation (Early Ordovician), Korea, shows that RFC can form in marine‐meteoric mixing zones as a low‐magnesian calcite (LMC) cement. RFC in the shallow‐marine Dongjeom Formation occurs in arenaceous limestones at the top of a transgressive facies overlying a regressive facies. It shows well‐developed growth zonation, and lighter oxygen isotope values and more radiogenic strontium isotope ratios than those of Early Ordovician marine calcite. Such petrographic and chemical evidence indicates that the RFC was precipitated as a primary LMC cement in a marine and meteoric mixing zone. Owing to the unique environment of formation, the Dongjeom RFC is characterized by growth zonal fabric comprising alternating subzones, which may indicate precipitation from varying fluids. In addition, this study documents the importance of substrate for development of RFC. Early ‘nucleation’ for RFC occurred mainly on microcrystalline skeletal grains and internal sediments, whereas on homogeneously altered substrates, thin‐coated banding structure developed, ultimately forming coarse crystalline spar. This suggests that microcrystalline substrates are preferred sites for nucleation of RFC.     

Postglacial marine environmental changes in Maxwell Bay, King George Island, West Antarctica

Sediment textural properties and total organic carbon (TOC) contents of three sediment cores from Maxwell Bay, King George Island, West Antarctica, record changes in Holocene glaciomarine sedimentary environments. The lower sedimentary unit is mostly composed of TOC-poor diamictons, indicating advanced coastal glacier margins and rapid iceberg discharge in proximal glaciomarine settings with limited productivity and meltwater supply. Fine-grained, TOC-rich sediments in the upper lithologic unit suggest more open water and warm conditions, leading to enhanced biological productivity due to increased nutrient-rich meltwater supply into the bay. The relationship between TOC and total sulfur (TS) indicates that the additional sulfur within the sediment has not originated from in situ pyrite formation under the reducing condition, but rather may be attributed to the detrital supply of sand-sized pyrite from the hydrothermal-origin, quartz-pyrite rocks widely distributed in King George Island. The evolution of bottom-water hydrography after deglaciation was recorded in the benthic foraminiferal stable-isotopic composition, corroborated by the TOC and lithologic changes. The ع⁸O values indicate that bottom-water in Maxwell Bay was probably mixed gradually with intruding ¹⁸O-rich seawater from Bransfield Strait. In addition, the ع³C values reflect a spatial variability in the carbon isotope distribution in Maxwell Bay, depending on marine productivity as well as terrestrial carbon fluxes by meltwater discharge. The distinct lithologic transition, dated to approximately 8000 yr BP (uncorrected) and characterized by textural and geochemical contrasts, highlights the postglacial environmental change by a major coastal glacier retreat in Maxwell Bay.     

Estimating Ore Production in Open-pit Mines Using Various Machine Learning Algorithms Based on a Truck-Haulage System and Support of Internet of Things

Natural Resources Research - This study aimed to develop and assess the feasibility of different machine learning algorithms for predicting ore production in open-pit mines based on a truck-haulage...