Difference-frequency wave loads on a large body in multi-directional waves

The second-order difference-frequency wave forces on a large three-dimensional body in multi-directional waves are computed by the boundary integral equation method and the so-called FML formulation (assisting radiation potential method). Semi-analytic solutions for a bottom-mounted vertical circular cylinder are also developed to validate the numerical method. Difference-frequency wave loads on a bottom-mounted vertical cylinder and stationary four legs of the ISSC tension-leg platform (TLP) are presented for various combinations of incident wave frequencies and headings. These force quadratic transfer functions (QTF) can directly be used in studying slowly varying wave loads in irregular short-crested seas described by a particular directional spectrum. From our numerical results, it is seen that the slowly varying wave loads are in general very sensitive to the directional spreading function of the sea, and therefore wave directionality needs to be taken into account in relevant ocean engineering applications. It is also pointed out that the uni-directionality of the sea is not necessarily a conservative assumption when the second-order effects are concerned.     

Effects of Meteorological Factors on Toxic Red Tide Events in Sabah, Malaysia

Abstract. Red tides of the toxic dinoflagellate Pyrodinium bahamense var. compressum have occurred almost annually since 1976 in the coastal waters of the west coast of Sabah, Malaysia. Field obSérvations have indicated that the timings of these outbreaks could be linked to meteorological forcings. All the red tides have occurred during either the northeast or southwest monsoon periods. Matching of red tide outbreaks with total monthly rainfall, monthly-averaged index of wind-induced surface water mixing, and monthly-averaged upwelling index for the period from 1975 to 1989 failed to show any definite pattern. However, more red tide events occurred in months with high mixing index values. The absence of definable patterns could be due to the use of monthly, rather than daily, values in the calculations.     

Measuring low concentrations of Th in water and sediment

²³⁴Th/²³⁸U disequilibria have been used extensively in studies of particle dynamics and the fate and transport of particle-reactive matter in marine environments. Similar work in low salinity, estuarine, and freshwater systems has not occurred primarily because the lower concentrations of both parent and daughter nuclides that are typical of these systems often render established methods for the analysis of ²³⁴Th inadequate. The application of this radionuclide tracer technique to these systems, however, has great potential. To this end, we present a method for measuring low activities of ²³⁴Th in relatively small samples (<200 l) using low background gas-flow proportional counters, a ²²⁹Th yield monitor, and empirical corrections for the interferences from real and apparent betas that are emitted by other thorium isotopes and their progeny. For samples with low ²³⁴Th/²²⁸Th activity ratios, we improve upon current beta counting methodologies that rely on immediate sample counting, weak beta absorption, or multiple beta counts so that, using the analytical approach outlined here, it should be possible to measure ²³⁴Th activities (i) as low as 1.5 dpm/total sample, (ii) up to 2 weeks after radiochemical purification of thorium, and (iii) with only one sample count for alpha and beta activity.     

Primary production in the Kuroshio current surrounding Taiwan

Primary production in the Kuroshio current flowing around Taiwan Island was measured by using the radiocarbon method. High values of the daily primary production were found in both the aquacultural area at the western coast and the polluted area with raw rubbish heaps at the Keelung-Patoutzu coast. In the upwelling region of southeastern coast, low values of the primary production were observed. In the eastern coast, the rate of photosynthesis for an unit amount of chlorophylla under the saturated light was in the range of 1.2±0.2 mg C/mg chlorophylla/hr. Some discussions are made on the observed results.     

High-resolution sea ice in long-term global ocean GCM integrations

The resolution of the sea-ice component of a coarse-resolution global ocean general circulation model (GCM) has been enhanced to about 22 km in the Southern Ocean. The ocean GCM is designed for long-term integrations suitable for investigations of the deep-ocean equilibrium response to changes in southern hemisphere high-latitude processes. The space and time scales of the high-resolution sea-ice component are commensurate with those of the resolution of satellite passive-microwave sea-ice data. This provides the opportunity for a rigorous evaluation of simulated sea-ice characteristics. It is found that the satellite-derived continuous high ice concentration of the interior winter ice pack can only be captured when vertical oceanic mixing is modified in a way that less local, intermittent convection occurs. Furthermore, the width and the variability of the coastal polynyas around the Antarctic continent and its ice shelves are best captured when some form of ice-shelf melting is accounted for. The width of the wintertime ice edge is reasonably reproduced, while its variability remains underestimated, closely following the coarse-grid pattern of the ocean model due to its high dependence on ocean temperature. Additional variability besides daily winds, e.g. in form of idealized tidal currents, improves the temporal and spatial ice-edge variability, while leads in the interior ice pack become more abundant, more in line with the fine-scale satellite-derived texture. The coast- or ice-shelf line is described on the fine grid based on satellite passive-microwave data. This method requires parts of a coarse coastal ocean grid cell to be covered by an inert layer of “fast ice” or “ice shelf”. Reasonable long-term global deep-ocean properties can only be achieved when these areas are not inert, i.e. are exposed to heat flux and ice growth, or when the vertical mixing parameterization allows for excessive open-ocean convection. The model area exposed to cold high-latitude atmospheric conditions thus being most decisive for a realistic representation of the long-term deep-ocean properties, suggests that high-latitude coastlines are definitely in need of being represented at high resolution, including ice sheets and their effects on the heat and freshwater flux for the ocean.     

Measuring Individuals' Spatial Access to Healthy Foods by Incorporating Mobility,Time, and Mode: Activity Space Measures

Spatial access to healthy foods has drawn growing attention regarding the relationship with people's health conditions and demographic and socioeconomic characteristics. Individuals' differences and the impact of travel behaviors on food accessibility, however, are rarely studied. This study incorporates mobility, time, and transportation mode components to measure each individual's access to healthy foods. We employed three activity space measures to estimate food accessibility: route network buffer, time-weighted standard deviational ellipse (SDE), and mode-weighted SDE. Food accessibility in three activity spaces shows similar variabilities. Geographic size and spatial access to healthy foods differ significantly by income and employment for all three activity space measures. People with higher incomes and those who are currently employed are likely to have larger activity spaces and higher food accessibility. As age increases, people tend to increase their size of activity spaces (in both SDE measures) and food accessibility significantly. Females are likely to have smaller activity spaces and less accessibility to healthy foods (only in the time-weighted SDE measure). Geographic size and spatial access do not differ significantly by education and number of vehicles per household. Although three activity spaces are highly correlated in both geographic size and spatial access, differences still exist among them.     

Configuration of hydrological processes in a steep hillslope through causality analysis of soil moisture measurements

The vertical and lateral profiles of temporal variations in soil moisture are important for understanding the hydrological process along hillside transects. In this study, relationships among measured soil moistures were explored to configure the hydrological contributions of different flowpaths. All the measured soil moistures included a common stochastic structure because rainfall, the hydrometeological driver, is the main factor that determines the soil moisture response feature, and the infiltration process through the topsoil at a shallow depth is also common in all measured soil moisture histories. Therefore, the relationships between the measured series are also affected by both rainfall and topsoil infiltration. The common stochastic structure of the soil moisture series was removed via a prewhitening procedure. A systematic analysis procedure is presented to delineate the exclusive causal relationships among multiple soil moisture measurements. A monitoring system based on multiplexed time domain reflectometry was used to obtain soil moisture time series along two transects on a steep hillslope during the rainy season. The application of the proposed method for monitoring points in two adjacent locations provided 8, 12, 14, and 13, 16, 22 causal relationships for vertical, lateral in parallel, and diagonal directions, respectively, along the two transects. The point‐based contributions of the internal flowpath can be evaluated as the correlation is normalized in the context of inflow and outflow. The hydrological processes in the soil layer, vertical flow, lateral flow, downslope recharge, and return flow were quantified, and the relative importance of each hydrological component was determined to improve our understanding of the hydrological processes along the two transects of the study area. Copyright © 2011 John Wiley & Sons, Ltd.     

Three-dimensional analysis of bearing behavior of piled raft on soft clay

The piled raft has proved to be an economical foundation type compared to conventional pile foundations. However, there is a reluctance to consider the use of piled rafts on soft clay because of concerns about excessive settlement and insufficient bearing capacity. Despite these reasons, applications of piled rafts on soft clay have been increased recently. Current analysis methods for piled rafts on soft clay, however, are insufficient, especially for calculating the overall bearing capacity of the piled raft. This study describes the three-dimensional behavior of a piled raft on soft clay based on a numerical study using a 3D finite element method. The analysis includes a pile–soil slip interface model. A series of numerical analyses was performed for various pile lengths and pile configurations for a square raft subjected to vertical loading. Relatively stiff soil properties and different loading types were also used for estimating the bearing behavior of the piled raft. Based on the results, the effect of pile–soil slip on the bearing behavior of a piled raft was investigated. Furthermore, the proportion of load sharing of the raft and piles at the ultimate state and the relationship between the settlement and overall factor of safety was evaluated. The results show that the use of a limited number of piles, strategically located, might improve both bearing capacity and the settlement performance of the raft.