Evolution of the shear wave velocity during shaking modeled in centrifuge shaking table tests

Two in-flight shear wave velocity measurement systems were developed to perform the subsurface exploration of shear wave velocity in a centrifuge model. The bender elements test and the pre-shaking test used in the study provided reliable and consistent shear wave velocity profiles along the model depth before and after shaking in the centrifuge shaking table tests. In addition, the use of the bender elements measurement system particularly developed here allowed continuous examination of the evolution of shear wave velocity not only during and after the shaking periods in the small shaking events but also during the dissipation period of excess pore water pressure after liquefaction in the large shaking events. The test results showed that the shear wave velocity at different values of excess pore water pressure ratio varied as the effective mean stress to the power of 0.27, to a first approximation. Consequently, a relationship between the shear wave velocity evolution ratio and the excess pore water pressure ratio is proposed to evaluate the changes in shear wave velocity due to excess pore water generation and dissipation during shaking events. This relation will assist engineers in determining the shear stiffness reduction ratio at various r_u levels when a sand deposit is subjected to different levels of earthquake shaking.     

Metal accumulation in surface salt marsh sediments of the Bay of Fundy,Canada

We measured the amount of arsenic, chromium, copper, lead, nickel, vanadium, and zinc accumulated over a five-year period from 1997 to 2002 in surface sediments of seven salt marshes along the New Brunswick coast of the Bay of Fundy, Canada. Study sites extended from outer to inner Bay, spanning a gradient in tidal range (6–12 m) and mean sediment deposition rate (0.27–1.76 cm yr⁻¹). In each study site, metal concentrations were measured in low and high marsh areas. Concentrations of chromium, nickel, and zinc appear to be within their natural range, while arsenic, lead, and vanadium are enriched in some sites. Calculated sediment metal loadings rates showed variability among marsh sites that closely followed sediment deposition patterns, suggesting sediment deposition rate is the driving factor of short-term metal accumulation in Fundy marshes. The value of salt marshes as a sink for metals may be enhanced by high sedimentation rates.     

Monitoring severe aquifer-system compaction and land subsidence in Taiwan using multiple sensors: Yunlin,the southern Choushui River Alluvial Fan

During 1992–2007, excessive pumping of groundwater caused large-scale aquifer-system compaction and land subsidence in the Choshui River Alluvial Fan, especially in the area of Yunlin county. The subsidence impedes surface-water runoff and endangers the operation of Taiwan High Speed Rail. Leveling, Global Positioning System (GPS), multi-level compaction monitoring well, and Differential Interferometric Synthetic Aperture Radar (DInSAR) are used to study the extent of subsidence in Yunlin and its mechanism. These sensors complement each other in spatial and temporal resolutions. A leveling network totaling 434 km in length was deployed to derive subsidence at every 1.5 km along the routes, and the result is accurate to few mm and shows a basin-like subsidence pattern centering at Tuku Township. Four multi-level compaction monitoring wells, co-located with GPS pillars, detect compactions at different depths, showing that the aquifer-system compaction (the cause of subsidence) occurs mostly below depths >200 m, where reduction of groundwater pumping is most needed. The vertical displacements from GPS and leveling agree to within 1 cm, and are larger than the cumulative compaction detected by the compaction-monitoring wells, suggesting that compaction also occurs below 300 m (the depth of the wells). The vertical displacements derived using DInSAR and 8 ENVISAT SAR images agree with the leveling result to 1–2 cm.     

The Kellwasser events in the Upper Devonian Frasnian to Famennian transition in the Toc Tat Formation,northern Vietnam

Upper Devonian carbonates of the Toc Tat Formation in the Si Phai Pass area of Dong Van District, northern Vietnam were deposited in carbonate platform, slope, and basin environments. These carbonates yield abundant conodonts indicative of the Palmatolepis nasuta, Pa. linguiformis and Pa. triangularis zones, the Frasnian–Famennian stage boundary being identified by the first occurrence of Pa. triangularis. Two positive carbon isotope excursions are recognized, the lower excursion peaking in the interval of the lower to middle Pa. nasuta Zone, whilst the upper excursion peaks just above the local Frasnian–Famennian boundary. Based on the biostratigraphy, these excursions equate to the Lower and Upper Kellwasser events. Locally, tentaculitoid taxa (Nowakia, Styliolina, Homoctenus, and Metastyliolina?) are abundant in the interval of the Pa. nasuta Zone, but show a drastic decline in abundance before the Lower Kellwasser Event, and only two taxa survived into the Famennian.     

Floodplain hydrology of the Mekong Delta,Vietnam

The Mekong Delta is one of the largest and most intensively used estuaries in the world. Each year it witnesses widespread flooding which is both the basis of the livelihood for more than 17 million people but also the major hazard. Therefore, a thorough understanding of the hydrologic and hydraulic features is urgently required for various planning purposes. While the general causes and characteristics of the annual floods are understood, the inundation dynamics in the floodplains in Vietnam which are highly controlled by dikes and other control structures have not been investigated in depth. Especially, quantitative analyses are lacking, mainly due to scarce data about the inundation processes in the floodplains. Therefore, a comprehensive monitoring scheme for channel and floodplain inundation was established in a study area in the Plain of Reeds in the northeastern part of the Vietnamese Delta. This in situ data collection was complemented by a series of high‐resolution inundation maps derived from the TerraSAR‐X satellite for the flood seasons 2008 and 2009. Hence, the inundation dynamics in the channels and floodplains, and the interaction between channels and floodplains, could be quantified for the first time. The study identifies the strong human interference which is governed by flood protection levels, cropping patterns and communal water management. In addition, we examine the tidal influence on the inundation in various parts of the Delta, since it is expected that climate change‐induced sea level rise will increase the tidal contribution to floodplain inundation. Copyright © 2011 John Wiley & Sons, Ltd.     

Multi‐dimensional analyses of the SEAM controlled source electromagnetic data—the story of a blind test of interpretation workflows

Using a subset of the SEG Advanced Modeling Program Phase I controlled‐source electromagnetic data, we apply our standard controlled‐source electromagnetic interpretation workflows to delineate a simulated hydrocarbon reservoir. Experience learned from characterizing such a complicated model offers us an opportunity to refine our workflows to achieve better interpretation quality. The exercise proceeded in a blind test style, where the interpreting geophysicists did not know the true resistivity model until the end of the project. Rather, the interpreters were provided a traditional controlled‐source electromagnetic data package, including electric field measurements, interpreted seismic horizons, and well log data. Based on petrophysical analysis, a background resistivity model was established first. Then, the interpreters started with feasibility studies to establish the recoverability of the prospect and carefully stepped through 1D, 2.5D, and 3D inversions with seismic and well log data integrated at each stage. A high‐resistivity zone is identified with 1D analysis and further characterized with 2.5D inversions. Its lateral distribution is confirmed with a 3D anisotropic inversion. The importance of integrating all available geophysical and petrophysical data to derive more accurate interpretation is demonstrated.     

Assessment with satellite data of the urban heat island effects in Asian mega cities

This study focuses on using remote sensing for comparative assessment of surface urban heat island (UHI) in 18 mega cities in both temperate and tropical climate regions. Least-clouded day- and night-scenes of TERRA/MODIS acquired between 2001 and 2003 were selected to generate land-surface temperature (LST) maps. Spatial patterns of UHIs for each city were examined over its diurnal cycle and seasonal variations. A Gaussian approximation was applied in order to quantify spatial extents and magnitude of individual UHIs for inter-city comparison. To reveal relationship of UHIs with surface properties, UHI patterns were analyzed in association with urban vegetation covers and surface energy fluxes derived from high-resolution Landsat ETM+ data. This study provides a generalized picture on the UHI phenomena in the Asian region and the findings can be used to guide further study integrating satellite high-resolution thermal data with land-surface modeling and meso-scale climatic modeling in order to understand impacts of urbanization on local climate in Asia.     

Geochemistry and petrogenesis of Permian ultramafic-mafic complexes of the Jinping–Song Da rift (southeastern Asia)

The Jinping–Song Da rift structure in the Emeishan Large Igneous Province is composed of Permian high- and low-Ti volcanic and volcanoplutonic ultramafic-mafic associations of different compositions and genesis. High-Ti picrites, picrobasalts, basalts, and dolerites are enriched in LREE and depleted in HREE and show low Al₂O₃/TiO₂ ratios (~4), commensurate ε_Nd(T) values (+0.5 to +1.1), and low (Th/Nb)_PM ratios similar to those of OIB-enriched mantle source. The established geochemical characteristics evidence that the parental melts of these rocks were generated from garnet lherzolite at the depths of garnet stability (~200 to 400 km). Later, high-Mg low-Ti volcanics (komatiites, komatiitic basalts, and basalts) and associating small peridotite-gabbro massifs and komatiite-basalt dikes were produced as a result of ~20% partial melting of depleted water-poor (≤0.03 wt.% H₂O) peridotite substratum from the hottest upper part of mantle plume at relatively shallow depths (100–120 km). The LREE-depleted komatiites and komatiitic basalts are characterized by low (Ce/Yb)_CH values, ¹⁸⁷Re/¹⁸⁸Os = 0.05–1.2, ⁸⁷Sr/⁸⁶Sr = 0.704–0.706, positive ε_Nd(T) values (+3 to +8), γ_Os = –0.5 to +0.9, and strong negative anomalies of Ba, K, and Sr on the spidergrams. The scarcer LREE-enriched komatiites, komatiitic basalts, and basalts vary greatly in chemical composition and values of ε_Nd(t) (+6.4 to –10.2), ⁸⁷Sr/⁸⁶Sr (0.706–0.712), and γ_Os (+14.8 to +56), which is due to the different degrees of crustal contamination of parental magmas. The Rb-Sr isotopic age of basaltic komatiite is 257 ± 24 Ma. The Re-Os age determined by analysis of 12 komatiite samples is 270 ± 21 Ma. These data agree with the age of flood basalts of the Emeishan Large Igneous Province. The komatiite-basalt complex of the Song Da rift is still the only Phanerozoic PGE-Cu-Ni-complex of this composition. The geochemistry of accompanying Cu-Ni-PGE-ores confirms their relationship with komatiite-basaltic magmatism.     

Life span of a landslide dam on mountain valley caught on seismic signals and its possible early warnings

Landslides - Outburst flooding after a landslide dam breach causes global fatalities and devastation. Information on the timing, magnitude, and location of the landslide dam is crucial to hazard...