山东沂水县常庄钛铁矿地质特征及成因探讨

沂水县常庄钛铁矿床产于中细粒含钛磁铁矿辉石角闪石岩中,该岩体既是成矿母岩又是赋矿围岩。矿体长1 800 m,平均宽75 m,控制斜深344 m,平均品位TiO28.85%,品位变化系数为104%,TFe＋TiO2平均品位28.24%,品位变化系数为102%。属品位变化较不均匀的矿体。该矿床具有矿体规模大,形态简单,易于开采之特点。通过对矿床地质特征的研究,认为该矿床属基性岩浆分异型钛铁矿床,其成矿时代为古元古代。     

黔南-桂中地区泥盆系层序地层格架中的储集体特征研究

通过对黔南坳陷和桂中坳陷的地层对比和分析,识别出了8种层序界面标志,共划分两个超(二级)层序SS1和SS2,并讨论了各体系域特征。在层序格架中对研究区内的储集体类型进行了总结,主要包括生物礁(滩)储集体、白云岩储集体和缝洞型储集体等3种类型。对层序格架中储集体的成因类型进行了总结归纳:有利的储集体主要有TST礁滩灰岩储集体、HST礁滩灰岩、白云岩储集体。     

青藏高原措勤盆地巨厚古生代碳酸盐岩坳陷的地球物理证据

简要介绍了措勤盆地的重力、磁力和大地电磁异常特征,针对措勤县北巨厚的大地电磁高阻异常,结合地质、重磁异常和岩石物性进行了综合研究与解释,多方法相互佐证与约束,认为地处裂陷或地堑带的高阻异常是古生代海相碳酸盐岩沉积地层的反映。巨厚古生代沉积地层的存在,表明措勤盆地具有较好的寻找古生界油气藏的前景。     

天津市潮间带柱状沉积物中重金属的污染历史及来源判别

利用因子分析和元素含量特征分析两种方法,对天津市潮间带的4个无扰动沉积物柱样的46个样品进行了重金属分析,并探讨了重金属的来源方式和富集原因。研究结果表明,天津市潮间带的重金属可分为3类:1)Fe、Cr、Al及Mn元素主要受环境背景值的影响,2)Hg和Cd受人为活动的影响较大,3)As、Zn、Pb、Cu及Ni受环境背景值及人类活动的双重影响,且影响大小随所在位置的不同而变化。结合210Pb和137Cs测年结果,定量确定了天津市潮间带小于0.063 mm粒级沉积物中Ni等11种重金属元素的环境背景值,并以此为基础,进一步探讨了重金属富集年代、富集量及污染历史和人类活动的关系,发现多数重金属的污染始于1910年代,并在1954年之后富集量增加。     

鄂尔多斯盆地东北部侏罗纪煤系烃源岩的分布特征

鄂尔多斯盆地东北部是煤炭、石油、天然气、砂岩型铀矿等有机矿产共存的代表性地区之一,煤系烃源岩作为原始物质,在多种能源矿产成藏(矿)过程中起着重要作用。从煤系层序地层格架及沉积体系分析入手,分析了鄂尔多斯盆地东北部侏罗纪煤系烃源岩的种类、岩性、聚积环境、发育程度、时空分布等。结果表明,煤系烃源岩随时间在纵向上的变化与盆地的演化阶段相一致,盆地相对稳定期,烃源岩发育程度最好,初始和退覆充填期次之;空间上总体分布为由北向南,自西向东,层数增多,厚度增大。该区广泛发育的煤系烃源岩为多种能源矿产形成奠定了物质基础,其时空分布对多种能源共存成藏格局具有初始控制作用。     

Microstructure characteristics and forming environment of late Quaternary Period loess in the Loess Plateau of China

Since the late Quaternary Period, the rapid rising of the northeastern Qinghai-Tibetan Plateau has greatly changed the East Asian climate and formed different regional monsoon climates. Various microstructures of the loess in northern China have formed under a variety of climatic conditions. The scanning electron microscope (SEM) and energy spectrum analysis are used in this paper to study the relationship between the indexes of loess microstructures and the forming climates, and the indexes include the diameter of sand grains, Ca/Fe value and the characteristic shapes of the loess from SEM microstructures pictures. In terms of their respective climatic circumstances, the major microstructures of regional loess may be classified into nine categories according to their forms and particle sizes, such as loess formed in near-sand source, loess of granule sand dropping, and loess formed in hot and rainy places, i.e. with the loess SEM pictures, climates of about 15 ka b.p. in different places may be evaluated. In conclusion, the clear and distinguishable loess microstructures and their indexes in the Loess Plateau of China can also deduce the evolution of climate, such as warm or cold and wet or dry, and even sandstorm activities when the loess is deposited.     

Temporal and spatial distribution characteristics of nutrients in Clarion-Clipperton Fracture Zone in the Pacific in 2017

This research investigated eight stations in Clarion-Clipperton Fracture Zone(CCFZ) in the eastern tropical Pacific in 2017 to study the spatial distribution characteristics of nutrients and chlorophyll a(Chl a) concentration,and compared nutrient concentrations and molar ratios with those of other investigations 20 years ago in the same area. The study found that dissolved inorganic nutrient(N, P and Si) concentrations were lowest in the upper layer, and increased from surface to some depths, t...     

Distribution characteristics of delta reservoirs reshaped by bottom currents: A case study from the second member of the Yinggehai Formation in the DF1-1 gas field,Yinggehai Basin,South China Sea

The Dongfang1-1 gas field (DF1-1) in the Yinggehai Basin is currently the largest offshore self-developed gas field in China and is rich in oil and gas resources. The second member of the Pliocene Yinggehai Formation (YGHF) is the main gas-producing formation and is composed of various sedimentary types; however, a clear understanding of the sedimentary types and development patterns is lacking. Here, typical lithofacies, logging facies and seismic facies types and characteristics of the YGHF are identified based on high-precision 3D seismic data combined with drilling, logging, analysis and testing data. Based on 3D seismic interpretation and attribute analysis, the origin of high-amplitude reflections is clarified, and the main types and evolution characteristics of sedimentary facies are identified. Taking gas formation upper II (IIU) as an example, the plane distribution of the delta front and bottom current channel is determined; finally, a comprehensive sedimentary model of the YGHF second member is established. This second member is a shallowly buried “bright spot” gas reservoir with weak compaction. The velocity of sandstone is slightly lower than that of mudstone, and the reflection has medium amplitude when there is no gas. The velocity of sandstone decreases considerably after gas accumulation, resulting in an increase in the wave impedance difference and high-amplitude (bright spot) reflection between sandstone and mudstone; the range of high amplitudes is consistent with that of gas-bearing traps. The distribution of gas reservoirs is obviously controlled by dome-shaped diapir structural traps, and diapir faults are channels through which natural gas from underlying Miocene source rocks can enter traps. The study area is a delta front deposit developed on a shallow sea shelf. The lithologies of the reservoir are mainly composed of very fine sand and coarse silt, and a variety of sedimentary structural types reflect a shallow sea delta environment; upward thickening funnel type, strong toothed bell type and toothed funnel type logging facies are developed. In total, 4 stages of delta front sand bodies (corresponding to progradational reflection seismic facies) derived from the Red River and Blue River in Vietnam have developed in the second member of the YGHF; these sand bodies are dated to 1.5 Ma and correspond to four gas formations. During sedimentation, many bottom current channels (corresponding to channel fill seismic facies) formed, which interacted with the superposed progradational reflections. When the provenance supply was strong in the northwest, the area was dominated by a large set of delta front deposits. In the period of relative sea level rise, surface bottom currents parallel to the coastline were dominant, and undercutting erosion was obvious, forming multistage superimposed erosion troughs. Three large bottom current channels that developed in the late sedimentary period of gas formation IIU are the most typical.     

台风期间浮标和潜标上ADCP的空间变化、数据误差及校正#br#

基于南海北部浮标和潜标的声学多普勒流速剖面仪（ADCP）数据,通过一套几何算法计算了台风海鸥（1415）期间ADCP的空间变化和流速误差,并进行数据校正。浮标上,台风过后ADCP的水平位移最大可达2.61 km,水平流速误差最大可达0.27 m/s,垂向流速误差最大仅为5×10^-4 m/s;温跃层流速校正值在台风过后显著大于流速测值,这表明水平校正对于温跃层流速的质量控制很重要。潜标上,ADCP最大垂向位移增量为179 m,最大绳子倾角为35°,最大水平位移为1.5 km; ADCP水平流速误差和倾角误差都很小,在数据校正中可忽略不计,但对台风过后中层流速的垂向校正不能忽略。