一种基于马尔可夫随机场的影像纹理分类方法

针对纹理影像先估计出其马尔可夫随机场参数,后运用多元统计分析中模糊聚类分析的数学方法进行定量分类,从而为解决划分上的不确定性现象找出描述方法,获得客观的分类结果。     

SVG在热带气旋信息图形化中的应用

介绍了SVG技术显示地图信息的优点以及使用MICAPS的地图数据做矢量地图的方法,提出用SVG图像进行热带气旋信息图形矢量化服务的技术方案,认为使用SVG技术开展气象信息图形矢量化服务的研发工作,可以大大提高气象预报信息产品的可视化程度与数据信息共享,以及结构化的信息交换能力。     

基于灰色关联度模型的区域滑坡敏感性评价

数理统计和机器学习模型如支持向量机(support vector machine,SVM)等,在区域滑坡敏感性评价中得到广泛的应用.但这些模型的建模过程往往较复杂,如在对机器学习进行训练和测试时难以选取合理的非滑坡栅格单元,而且有较多的模型参数需要确定.为提高滑坡敏感性评价建模的效率和精度,提出基于灰色关联度的敏感性评价模型.灰色关联度模型能有效计算各比较样本与参考样本之间的定量的关联度,具有建模过程简洁和评价精度高的优点,该模型目前在区域滑坡敏感性评价中的应用还没有引起研究人员的足够关注且有待进一步拓展.拟将灰色关联度模型用于浙江省飞云江流域南田—雅梅图幅(南田地区)的滑坡敏感性评价,并将得到的评价结果与SVM模型的敏感性评价结果作对比分析.结果显示,灰色关联度模型在高和极高敏感区的滑坡预测精度优于SVM模型,而在中等敏感区的滑坡预测精度略低于SVM模型;整体而言,灰色关联度模型对整个南田地区滑坡敏感性分布的预测精度略高于SVM模型.对两个模型建模过程的对比结果显示,灰色关联度模型建模较简单,具有比SVM模型更高的建模效率,为滑坡敏感性评价提供了一种新思路.     

HY-1C/D卫星中国海洋水色水温扫描仪几何定位方法

海洋一号C/D（HY-1C/D）卫星中国海洋水色水温扫描仪（Chinese Ocean Color and Temperature Scanner,COCTS）主要用于探测海洋水色、水温等要素,这些要素需要经过卫星资料处理才能获取,而几何定位是预处理的核心,直接影响这些要素的质量。COCTS具有114°视场角和四元逐点摆扫的特征,据此研究出一套完整的几何定位方法。从0级数据中提取卫星星历,利用插值法从中获取采样时间对应的卫星位置和速度,进而得到轨道（ORB）坐标系到地心旋转（ECR）坐标系的转换矩阵。基于四元逐点摆扫的特征,中心视矢量分别绕X轴、Y轴旋转相应角度,获得扫描行各采样点ORB视矢量,建立视矢量与地球交叉点关系模型,从而对根据波段数据绘制的遥感图像进行地理定位。本文使用插值法替代了传统需要6个轨道根数来计算卫星位置的复杂方法,同时直接计算ORB到ECR的转换矩阵,而不采用传统的两步转换方法。经过多组数据计算及定性定量验证,HY-1C/D COCTS几何定位结果一致;采样像元尺度效应导致从星下点到两侧边缘、从赤道到两极,误差逐渐增大,约在两个像元内。该方法满足一定的定位精度要求,可以用于COCTS的几何定位。     

一个观测冰核的15 L混合云室

小型混合云室常用于自然冰核浓度的观测和人工冰核成核率的检测。使用表明:由于受云室容积、造雾方法和操作程序等因素的影响, 检测结果有很大差异, 难以相互比较。为提高检测数据的可信性, 设计并制作了15 L混合云室。云室由F22压缩机系统制冷, 最低能达到-28℃。为减小云室温度的波动, 在云室外围设计有装满乙二醇-水溶液的夹套。在溶液中, 安装了1个1 kW的电加热器, 接通后可使云室升温。在夹套外, 采用发泡技术形成约10 cm厚的绝热层, 以使云室与外界绝热。云室运行时, 可通过控制压缩机和电加热器得到实验温度。此外, 为拓宽检测冰核浓度的检测范围, 设计了玻璃片接取显微镜读数和糖盘接取目测读数两种可供选择使用的冰晶观测方法, 前者在冰晶浓度高时使用 (人工冰核), 后者在低浓度时使用 (自然冰核)。另一个重要改进是:先由一个超声雾化器产生常温雾, 而后使常温雾穿过一个低温狭缝进行预冷, 当雾温等于或低于云室温度后再进入云室。这一措施不仅避免了瞬时高度过饱和, 而且还减小了对云室温度的扰动。该云室在弹载催化剂成核率的改进实验中发挥了重要作用, 曾用它对多个人工冰核复合配方进行了检测和对比。结果表明:云室具有较好的稳定性和重复性, 整体性能优于以往的同类云室。这一结果是由于改进了提供过冷雾的设计和冰晶接取方法得到的。     

Multipath mitigation via component analysis methods for GPS dynamic deformation monitoring

Multipath is one of the main error sources in high-precision global positioning system (GPS) dynamic deformation monitoring, as it is difficult to be mitigated by differencing between observations. In addition, since a specific frequency threshold value between multipath and deformation signals may not exist, multipath is usually inseparable from the low-frequency vibration signal using conventional frequency-domain filter methods. However, the multipath repeats in two sidereal days when the surroundings of a GPS antenna remain unchanged. This characteristic can be exploited to model and thus mitigate multipath effectively in dynamic deformation monitoring. Unfortunately, a major issue is that the degree of repeatability decreases as the interval between first day and subsequent days increases. To overcome this problem, we develop a new sidereal filtering referred to as reference EMD-ICA (EMD-ICA-R), where empirical mode decomposition (EMD) and independent component analysis (ICA) are jointly used to model multipath and renew the reference multipath. For the successful implementation of the EMD-ICA-R, an a priori denoised multipath signal is needed as a reference. We further propose to use the principal component analysis (PCA) method to extract more accurate reference multipath signal and form a combined PCA-EMD-ICA-R approach. Simulation experiments with a motion simulation platform were conducted, and the testing results indicate that the proposed methods can mitigate the multipath by around 67 % when a reliable reference multipath signal is extracted from a static situation. Furthermore, simulation experiments with different deformation signals added into the coordinate time series of three consecutive days show that the two proposed methods are also effective in a dynamic situation. Since wavelet filtering is used to denoise the reference multipath signals in the new approaches, simulation experiments with several wavelet filters are tested, and the results indicate that the PCA-EMD-ICA-R approach can work well with various wavelet filters.     

福建建宁黄埠地区金矿化基本特征

通过对建宁黄埠地区金矿地质特征、矿化特点、成矿地质规律的研究，认为该区成矿年龄为91Ma，提出了北西西向碎裂带为主要的含矿构造，并指出该区具有较好的找金远景。     

Effects of the distribution function of non-thermal electrons and of cyclotron resonant absorption on millisecond radio spikes

A theoretical analysis of electron-cyclotron maser instabilities indicates that the distribution function of non-thermal electrons influences millisecond radio spikes in solar flares, and that a hollow beam distribution is more likely than a loss-cone distribution. The restrictions of classical theories of cyclotron resonant absorption are discussed and a formula is derived for the absorption coefficient near the resonant frequency. Finally, the computations show that for typical coronal parameters, the growth rates of the fundamental of fast extraordinary modes are much faster than those of their second harmonics; and because the directional angle of the fundamental is smaller, its resonant absorption may be neglected. Moreover, the band-width of the fundamental is consistent with observation of radio spikes; therefore, we claim that the millisecond radio spikes in the decimetric range are composed mainly of fundamentals of the fast extraordinary modes. The second harmonics of fast extraordinary modes may be generated for directions near to the vertical to the magnetic field, but it is impossible to observe both fundamental and second harmonics in the same direction.     

Hydrocarbon Generating Potential of Mineral—Bituminous Matrix in Source Rocks

Mineral-bituminous matrix(MBM) makes up a major part of source rocks,but its potential in hydrocarbon generation is uncertain,Mineral and organic (Maceral and kerogen) compositions,organic maturity and fluorescence of MBM are studied based on source rock samples from eastern Jiuquan(Jiudong)Basin.The results show that MBM is dominated by inorganic minerals and among the small percentage of organic components those of secondary origins are predominant over the primary species.This strongly indicates that the significance of MBM in hydrocarbon generation is limited.     

Huanghe (Yellow River) and its estuary: Sediment origin, transport and deposition

The upper part of the Huanghe (Yellow River) drainage basin supplies 50–60% of the annual water discharge and only 10% of the total river sediment load, while the middle reaches contribute 30–40% of the water flow and 90% of the annual sediment load, because of severe erosion over the Loess Plateau. Large variations in both annual water discharge and sediment load occur in the Huanghe. Heavy sedimentation in the lower reaches of the channel makes the river bed aggrade several centimetres per year. Of the suspended sediment in the river, 90–95% is deposited in the lower part of the river course and in the coastal shallow water area; less than 5–10% escapes from Laizhou Bay and enters the Central Bohai and/or North Huanghai (Yellow Sea). The active delta complex now propagates seawards at a mean rate of 42 km² year⁻¹.