Geochemistry and environmental effect of cadmium in the super-large Jinding Pb-Zn deposit,Yunnan Province,China

The Jinding Pb-Zn deposit in Yunnan Province is the representative of a Cd-enriched area and mining activities lead to the release of Cd into the hypergenic ecosystem, resulting in Cd pollution. The concentrations of Cd vary greatly from one type to another type of rocks in the mining district. In the host rock, Cd concentrations range from 50×10^-6 to 650×10^-6 with an average of 310×10^-6. In primary ores, Cd concentrations range from 14×10^-6 to 2800×10^-6 with an average of 767×10^-6. However, in oxidized ores, Cd concentrations are highest, varying within the range of 110×10^-6 to 8200×10^-6 , averaging 1661×10^-6. It is shown that the oxidized ores are the main carder and environmental source of Cd. Leaching test showed that Pb/Zn ores are easy to oxidize and thereafter release Cd and other harmful elements. These leached elements in the leachate may be precipitated rapidly in the order of Zn〉Pb〉Cd. As for the concentration distribution of Cd in the Bijiang River, it is estimated to be 15.7 μg/L Cd in water, 49.3 mg/L in suspended substances, and 203.7 mg/L in sediments. The average value of Cd in soil from the polluted area is 83.0 mg/kg. Natural weathering of Cd-rich rocks and minerals imposes a potential environmental risk on the aquatic ecosystem of the Bijiang catchment.     

福建建阳大金山铅锌矿床地球物理化学异常特征

大金山铅锌矿位于泰宁一政和北东东向铜多金属成矿带上,是该成矿带主要的矿种之一,也是闽北地区一个较有价值的矿床。矿床产于早元古代南山组上段,受燕山期北东东向构造控制,属中低温热液充填交代型矿床。     

GIS支持的城市固体废弃物规划管理信息系统构建

研究了基于组件式GIS平台MapX的城市固体废弃物规划管理信息系统的设计与实现;讨论了系统框架与系统功能设计、数据库设计和系统实现的关键技术。以昆明市为例,构建了基于MapX的城市固体废弃物规划管理信息系统。该系统能够实现城市固体废弃物各类数据的采集、表达和输出,提供与城市固体废弃物管理模型无缝集成的接口,可利用地图、文字、表格等多种手段为城市固体废弃物规划管理提供辅助决策。     

重庆市石漠化灾害特征及防治分区研究

石漠化灾害是影响重庆市岩溶地区可持续发展的主要障碍之一,必将危及到三峡水库区的生态环境.在遥感和GIs技术的支持下,文章对重庆市石漠化灾害的数量特征、空间分布特征,以及石漠化灾害的发育特征进行分析,进而对研究区的石漠化灾害治理进行分区,并对每一分区的石漠化灾害的特征与成因进行分析与描述,提出石漠化灾害治理与防治的主要措施.     

大岭子金矿地质特征及选矿浸出率

大岭子金矿V1矿体赋存于中元古界高黎贡山群变质岩中,受韧性剪切带控制,矿石类型以氧化矿石为主。提出选矿依据。     

广西佛子冲铅锌矿田成岩成矿时代研究

广西佛子冲铅锌矿田位于桂东南博白-岑溪多金属成矿带的NE端,区内发育燕山期花岗岩、花岗闪长岩、二长花岗斑岩和英安质凝灰熔岩等;其中花岗闪长岩和二长花岗斑岩与铅锌成矿关系密切,成矿岩体形成时代分别为156Ma和127Ma。     

基于ArcScene的建筑物日照分析模块的设计与实现

介绍了利用ArcObjects开发、基于ArcScene的建筑物日照分析模块的研制,对各个子模块作了介绍。特别对涉及到的日照分析技术、阴影动态显示、3维建筑设计等技术做了详细的说明。最后对该模块的应用做了简要演示。     

结合GPS/Leveling和正高改正确定GPS常年观测站正高

利用精密几何水准测量结合GPS/Leveling方法计算韩国行政自治部管辖内30所GPS常年观测站天线基准点的正高。并联合进行对水准点和GPS常年观测站偏心点的重力测量,使用正高改正方法计算出其改正量,提高正高的精确度。     

Pumping decisions for sustainable development of groundwater resources in areas of grassland degradation: a case study in Lanqi Banner, Inner Mongolia, China

The best planting alternatives for satisfying high water use demands of forage and fodder crops in a region of Inner Mongolia, China, were determined by a multiobjective distributed-parameter groundwater management model. These alternatives took account of different cropping patterns and pumping decisions associated with both temporal and spatial aspects of water allocation. The model was developed for phreatic, homogenous, and isotropic aquifers using the response matrix technique of quadratic programming theory and, in this case, using the alternative direction implicit (ADI) scheme. Model solutions using effective rainfall with a probability of 50%, show that average water table drawdown in the planning period (2006–2017) is 0.22 m and the groundwater fluctuation in each pumping well is very low. In order to evaluate the pumping decisions under an effective rainfall with a probability of 75%, a sensitive analysis was also conducted. Analysis shows that it is useful to apply the results from the proposed model to control the landscape degradation due to overgrazing and overpumping activities.     

鄂尔多斯盆地靖边气田马五_(1+2)气藏储集单元研究

综合地震、地质、测井等信息,考虑沉积、成岩、地貌、生产动态等多因素,在沟槽识别和致密带研究基础上,通过井间干扰、油层压力变化和试井边界响应分析,按照局部、就近原则对靖边气田马五1+2气藏进行了储集单元划分。共划分出111个储集单元,其中独立型69个,复合型42个。这些储集单元的面积多介于10～50km2之间,单个储集单元的井数一般少于6口。在对气藏储层特征综合认识的基础上,确定流动单元划分思路与流程,并认为关键环节包括古沟槽识别、致密带研究、动静结合确定储集单元等3个方面。储集单元一方面受控于被致密岩相包围的有利成岩相带,宏观上与弱—中等充填泥粉晶白云岩相对应性好;另一方面又受各级古沟槽夹持,在两个一级古沟槽之间往往共生多个储集单元,而这些储集单元边界又严格地受二级或三级沟槽切割控制。