贵州西北部基性侵入岩锆石U-Pb年代学、岩石地球化学特征 及其与铅锌成矿关系初探

贵州西北部发育多处基性侵入岩,总体规模较小(约0.25 Km2),多沿深大断裂侵位,出露于铅锌矿点外围,本文对猫猫厂、凉山两处矿点附近的儿马冲和白岩庆两地小型基性侵入岩进行了重点研究。侵入岩主要岩性为细粒辉长岩,造岩矿物主要为拉长石、普通辉石。SiO2范围为49.60-51.09 wt%,MgO从3.88-4.27 wt %,TiO2为3.69-3.85 wt %。LA-ICP-MS锆石U-Pb定年结果为268.3±7.4 Ma,显示岩浆侵位于二叠纪。基性侵入岩的微量元素蛛网图呈OIB型特征,富集大离子亲石元素（LILE）、轻稀土元素（LREE）,亏损重稀土元素（HFEE）,相对亏损高场强元素（Nb,Ta）,有Sr、Y亏损,Pb富集。(87Sr/86Sr)i范围0.706749～0.707069,(143Nd/144Nd)i范围0.512313～0.512363,εNd(t)范围0.2～1.2;源区熔融深度处于石榴石橄榄岩相深度,可能经历了1-3 %的部分熔融,处于亏损石榴石二辉橄榄岩相向原始石榴石二辉橄榄岩相的过渡区。成岩过程中发生了单斜辉石、斜长石等矿物分离结晶,受到了有限的地壳混染作用,未经历明显的AFC过程。地壳物质在地幔源区中的加入可能是造成地幔富集的主要原因。侵入岩与成矿作用之间的关系,主要通过两方面所表现。一方面是二者间构造活动上的耦合性。另一方面是基性岩在成矿过程中可能发挥了重要的化学屏障层作用。     

鄂尔多斯盆地纳岭沟铀矿床绿泥石特征及地质意义

纳岭沟铀矿床位于鄂尔多斯盆地北部,具有明显的后期热液作用的特征,矿体空间展布主要受控于绿色-灰色砂岩的过渡界面,与绿泥石化的蚀变砂岩关系密切。通过对纳岭沟铀矿床不同颜色砂岩中的绿泥石进行详细的岩相学研究和电子探针化学成分分析,依据绿泥石的成因与共生矿物的关系,识别出绿泥石主要的3种类型:填隙物型绿泥石,片状与黄铁矿共生型绿泥石以及黑云母蚀变型绿泥石;同时通过绿泥石的Fe-Si图解确定了纳岭沟铀矿床不同颜色砂岩中的绿泥石主要为铁镁绿泥石和密绿泥石。根据Al/(Fe+Mg+Al)-Mg/(Fe+Mg)的关系图解确定出不同颜色砂岩中的绿泥石具有铁镁质流体和泥质两种来源,通过绿泥石中主要阳离子与镁的关系图解和计算得出的绿泥石形成温度共同确定出绿泥石是多期次的中低温热液流体作用的产物。综合研究表明,纳岭沟铀矿床的绿泥石形成至少经历了温度稍高的还原性流体和温度稍低的氧化性流体等两个期次的流体作用,稍高温的还原性流体与成矿关系更为重要。与绿泥石形成有关的热液流体作用不仅带入了部分铀,还促进了铀的活化和运移。     

Research on comprehensive carrying capacity of Beijing–Tianjin–Hebei region based on state-space method

Based on state-space method and component analysis, this paper builds a comprehensive evaluation system of carrying capacity for the Beijing–Tianjin–Hebei region from four aspects, namely economy, environment, ecology and energy. The results show that the comprehensive carrying capacity in this region gradually rises in recent years and the economic carrying capacity plays an important role in this situation. Ecological and environmental carrying capacity are gradually enhanced but still affected by water shortages. The energy carrying capacity of this region is low, which is the major factor restricting its sustainable development. Based on the empirical results, following policy suggestions should be adopted: Firstly, local government should accelerate technological progress, promoting the optimization and upgrading of industrial structure; Secondly, the contradiction between supply and demand of water resource should be solved gradually; thirdly, government should develop recycling economy, realizing the coordinated development of economy and environment; last but not least, saving energy and improving energy efficiency.     

Carbon emission mitigation through regulatory policies and operations adaptation in supply chains: theoretic developments and extensions

Along with carbon emission regulations launched by governments and consumers’ rising concerns about climate changes and global carbon footprint, interests of academia and industry have risen in carbon-efficient supply chain management. This research focuses on some product supply chain to make a literature review-based investigation on proposing a theoretical framework. We also solve potential research issues of how diverse carbon emission regulations can work on supply chain performance as well as emission; in what way we can find coordination mechanisms and optimal policies for supply chain operations to abate emission and enhance system profitability within different scenarios; and also to evaluate the effect on emission reduction for each emission regulation aforementioned through comparing their associated supply chain performances and system emission. Both practitioners in industry and academia might find this study useful, as it generates concepts with a formal framework of potential and values theoretical issues in the emerging field of carbon-efficient supply chain management which combines carbon emission regulations with mature operation management to enrich the theory of supply chain management. This study is perhaps to be valuable and constructive both for operational decisions in firms and for the enactment as well as implementation of emission-reduction regulations. This study should activate further potential researches.     

Two Methods for Predicting Reliability Index and Critical Probabilistic Slip Surface of Soil Slopes

Two methods of reliability analysis of soil slopes are studied, and the representative flow charts of both methods are illustrated. Method 1 can predict the reliability index and the critical probabilistic slip surface directly and it is computational efficient, but it needs the development of new codes for integrating the reliability analysis code and the slope stability code. Method 2 makes the reliability analysis code call the slope stability analysis code directly, and each code can be considered as an intact part. The main result of Method 2 is the reliability index of soil slope. Combined with the proposed method for locating the critical slip surface, Method 2 can also predict the probabilistic slip surface. Although Method 2 needs much more callings of the subprogram of slope stability analysis code, it needs not the developing of new computer program. Thus, Method 2 is easy to use and can be applied to different reliability analysis methods and slope stability analysis methods.     

Characteristics and Genetic Mechanisms of Overpressure in the Depressions of Bohai Bay Basin, China

The distribution and genetic mechanisms of abnormal pressures in the Bohai Bay Basin were systematically analyzed. Abnormal pressures are widely developed in the Bohai Bay Basin, primarily in the Paleogene E2s4, E2s3, Es1, and Ed formations. From the onshore area of the Bohai Bay Basin to the center of the Bozhong area, the top depth of the overpressured zone in each depression increases gradually, the overpressured strata in each depression gradually move to younger formations, and the pressure structure successively alters from single-bottom- overpressure to double-bottom-overpressure and finally to double-top-overpressure. The distribution of overpressured area is consistent with the sedimentary migration controlled by the tectonic evolution of the Bohai Bay Basin, which is closely related to the hydrocarbon-generation capability of active source rocks. The overpressured strata are consistent with the source-rock intervals in each depression; the top of the overpressured zone is synchronous with the hydrocarbon generation threshold in each depression; the hydrocarbon generation capability is positively correlated with the overpressure magnitude in each formation. Undercompaction was the main mechanism of overpressure for depressions with fluid pressure coefficients less than 1.2, whereas hydrocarbon generation was the main mechanism for depressions with fluid pressure coefficients greater than 1.5.     

加权Logistic回归模型在火山岩型铜矿预测中的应用:以宁芜盆地中段为例

文中探讨了加权Logistic回归模型在宁芜盆地中段火山岩型铜矿预测中的应用。首先,结合研究区的成矿地质背景,提取地质体、构造、围岩蚀变三大类证据因子;其次,分析各证据因子与铜矿点之间的空间关系,认为姑山旋回、娘娘山旋回火山机构控制了本区火山岩型铜矿的空间分布,根据计算结果,选取与火山岩型铜矿密切相关的龙王山组、姑山组地层,姑山旋回粗面斑岩、娘娘山旋回二长斑岩、NW向构造1.5 km缓冲区、NE向构造1.3 km缓冲区、EW向构造4.5 km缓冲区、硅化、褐铁矿化、黄铜矿化等作为模型自变量;最后采用加权Logistic回归模型进行成矿概率计算,并结合成矿地质背景,圈定四个成矿远景区,分别为P1、P2、P3、P4,其中P1、P2、P3呈北东向展布,主要受娘娘山和姑山火山机构控制,P4为东西向分布,主要受龙王山火山机构控制,在这些预测区中,均存在已发现的铜矿体,说明预测可信度较高。     

湘南荷花坪锡多金属矿床成矿年代研究

荷花坪锡多金属矿床是本世纪初在南岭中段湘南地区新发现的一个大型矿床,区内的锡多金属矿化产在王仙岭岩体东南内、外接触带,已发现有Ⅰ、Ⅱ、Ⅲ和Ⅳ号4个主要锡多金属矿体。其中,Ⅰ、Ⅱ和Ⅳ号矿体由早期矽卡岩型和晚期蚀变碎裂岩型矿石组成,Ⅲ号矿体则由独立产出的蚀变碎裂岩型矿石组成,且包含有部分碎裂花岗斑岩。以往研究已对Ⅳ号矿体中的矽卡岩型矿石和Ⅲ号矿体中含矿斑岩脉分别采用辉钼矿Re-Os法和锆石SHRIMP U-Pb法进行了测年,获得的年龄分别为224.0±1.9Ma和142±2Ma。本文补充了晚期蚀变碎裂岩型矿石的~(40)Ar/~(39)Ar测年,结果显示,Ⅱ号矿体中蚀变碎裂岩型矿石白云母样品和石英样品的坪年龄分别为151.88±1.58Ma和155.39±7.04Ma;Ⅳ号矿体中蚀变碎裂岩型矿石石英样品的坪年龄为156.94±1.64Ma。结合前人研究资料综合分析,认为荷花坪矿区存在印支晚期(224Ma)、燕山早期(151~156Ma)和燕山晚期(142Ma)三期成矿作用,分别与区内印支期中粗粒含电气石黑云母花岗岩、燕山早期中粗粒黑云母花岗岩和燕山晚期花岗斑岩脉有关,不同期成岩、成矿作用的构造环境均为岩石圈的拉张伸展。湘南地区印支期(205~224Ma)基性岩浆活动及荷花坪矿床印支期成岩、成矿过程中均有幔源物质的参与,它们共同指示南岭地区中生代构造体制的转换或岩石圈伸展减薄可能始于印支主期(230~244Ma)之后的224Ma左右,即晚三叠世。     

基于客观分析的多源卫星叶绿素a浓度产品融合方法研究

本文基于Aqua/MODIS、Terra/MODIS和Envisat/MERIS多源卫星叶绿素a浓度产品,研究了客观分析融合方法,制作了西北太平洋海域(0°~50°N,100°~150°E)叶绿素a浓度融合产品,并从有效数据空间覆盖率和产品精度两个方面对融合方法进行了评价。与单传感器以及欧洲太空局发布的GSM模型业务化融合产品相比,客观分析融合产品空间覆盖率明显提高;与收集的2002-2012年间叶绿素a浓度实测数据比较,GSM模型业务化融合产品的匹配数据点为578个,偏差为-0.20 mg/m3,均方根误差为0.37 mg/m3,客观分析法融合产品的匹配数据点为1432个,偏差为-0.21 mg/m3,均方根误差为0.36 mg/m3。结果表明:本文研究的客观分析融合方法在保证融合产品精度的同时可显著提高产品的空间覆盖率,在海洋水色融合应用前景广阔。