Inverse groundwater modelling in the Willunga Basin,South Australia

A new inverse technique for modelling groundwater flow, based on a functional minimization technique, has been used to calibrate a groundwater flow model of a subregion of the Port Willunga aquifer within the Willunga Basin in South Australia. The Willunga Basin is the location of extensive viticulture, irrigated primarily by groundwater, the levels and quality of which have declined significantly over the last 40 years. The new method is able to generate estimates of transmissivity, storativity and groundwater recharge over the whole subregion as a time-varying continuous surface; previous methods estimate local discrete parameter values at specific times. The new method has also been shown to produce accurate head values for the subregion and very good estimates of groundwater recharge. Its ultimate goal will be to provide a new and invaluable tool for significantly improved groundwater resource management. Supported in part by US National Science Foundation grants, DMS-0107492 and DMS-0079478.     

Advances in understanding the “Perfect Monsoon-influenced Typhoon”: Summary from International Conference on Typhoon Morakot (2009)

Typhoon Morakot (2009) produced 2855 mm of rain and was the deadliest typhoon to impact Taiwan with 619 deaths and 76 missing persons, including a landslide that wiped out an entire village. While Morakot did not exceed the heaviest 24-h rain record, the combination of heavy rain and long duration that led to the record accumulation is attributed to the southwest summer monsoon influence on the typhoon. Thus, a special combination of factors was involved in the Morakot disaster: (i) Strong southwesterly monsoon winds; (ii) Convergence between the typhoon circulation and monsoon flow to form an east-west oriented convective band over the Taiwan Strait that was quasi-stationary and long-lasting; (iii) A typhoon in a specific location relative to the Central Mountain Range and moving slowly; and (iv) Steep topography that provided rapid lifting of the moist air stream. The contributions of each of these four factors in leading to the Morakot disaster are reviewed primarily based on new research presented at the International Conference on Typhoon Morakot (2009). Historical data sets, new Doppler radar observations, and numerical modeling have advanced the understanding of the special conditions of monsoon-influenced typhoons such as Morakot. This research is also leading to modifications of existing and development of new forecasting tools. Gaps in scientific understanding, limits to the predictability, and requirements for advanced forecast guidance tools are described that are challenges to improved warnings of these extreme precipitation and flooding events in monsoon-influenced typhoons.     

Seasonal circulation in the southeastern Huanghai Sea

The seasonal circulation in the southeastern Huanghai Sea has been studied with hydrographic data,which were observed in February and June 1994 and bimonthly during 1970-1990,and numerical model results.Horiwntal distributions of temperature and salinity in 1994 are quite different due to strong tidal mixing so that we need a analysis to see the real distributions of water masses.The mixing ratio analysis with the data of 1970-1990 shows the connection of the waters in the west coasts of Kotea Peninsula with warm and saline waters from the south in summer,which means northward inflows along the west coasts of Korea Peninsula in summer.With this flow,the seasonal circulations,which are deduced from the seasonal change of water mass distributions in the lower layer,are warm inflows in winter and mld outflows in summer in the central Huanghai Sea,and cold outflows in winter and warm inflows in summer along the west coasts of Korea Peninsula.The seasonally changed inflows might be the Huanghai Sea Warm Current.The monsoon winds can drive such circulations.However,summer monsoon winds are weak and irregular.As one of other possible dynamics,the variation of Kuroshio transport is numerically studied with allowing sea level fluctuations.Although it should be studied more,it possibly drives the summer circulations.The real circulations seem to be driven by both of them.     

Foraminifera from the continental slope off Cape Hatteras, North Carolina

The recent benthic meiofaunal foraminiferal assemblage from the continental slope (590-2 003 m) off Cape Hatteras, North Carolina exhibits high species richness and evenness, moderate diversity values, and lacks numerically dominant species. The preserved planktic assemblage has relatively low species richness, high evenness, low diversity, and a few numerically dominant species. Approximately 9% of the benthic species are those that typically live within continental shelf depth ranges. The benthic assemblage abundances and diversities do not follow depth patterns or geophysical characteristics. No biogeographic boundary can be described within the study area for meiofaunal foraminifera. Oxygen limitation does not appear to be a factor affecting the benthos of the North Carolina continental slope based upon the community structure of the benthic foraminifera, if total assemblage is assumed to reflect the recently living community. The high carbonate content of sediments in the area may be explained by foraminiferal tests. Within the study area, the foraminiferal assemblages are uniform, and probably reflect relative consistency of primary environmental variables as well as dynamic downslope transport and high influx of material from the water column in the vicinity where the Gulf Stream and the Western Boundary Undercurrent cross.     

A comparison of growth patterns between non‐indigenous Halophila nipponica and the native sympatric Zostera marina on the southern coast of the Korean peninsula

The growth dynamics of two co‐occurring seagrass species, Zostera marina and Halophila nipponica, were examined on the southern coast of the Korean peninsula. Zostera marina is a native dominant seagrass species in Korean coastal waters, whereas H. nipponica is a non‐native tropical and subtropical species that has extended its distributional range to the temperate coastal areas of Korea. To examine the differences in the growth dynamics of H. nipponica and Z.  marina, their morphology, density, productivity and biomass, as well as local environmental conditions, were monitored monthly from January 2008 to July 2009. Underwater irradiance at the study site was the highest in April 2009 and the lowest in January 2008. Water temperature ranged from 10.4°C in January 2009 to 24.8°C in September 2008. Significant differences in growth dynamics were observed between the species, due to the effect of water temperature at the study site. Density and areal productivity were the highest in April 2008 and June 2008, respectively, for Z.  marina but the highest in July 2008 for H. nipponica. Leaf size, shoot height and shoot weight were the highest in July 2008 for Z.  marina but the highest in August 2008 or September 2008 for H. nipponica. The productivity of both species was strongly correlated with water temperature at the study site. However, the productivity of these species was not strongly correlated with underwater irradiance or the nutrient availability of either the water column or sediment pore water. Zostera marina exhibited the ecological characteristics of a temperate seagrass, whereas H. nipponica retained the features of a subtropical/tropical seagrass, even after adapting to the temperate coastal waters of Korea.     

Removal rate and releases of polybrominated diphenyl ethers in two wastewater treatment plants,Korea

Wastewater treatment plants (WWTPs) play an important role in minimizing the release of many pollutants into the environment. Nineteen congeners in two WWTPs in Korea were determined to investigate the occurrence and fate of polybrominated diphenyl ethers (PBDEs) during wastewater treatment processes. The concentration of total PBDEs was 69.6 and 183 ng/L in influent, which declined to 1.59 and 2.34 ng/L in the final effluent, respectively (Tongyeong and Jinhae WWTPs). PBDEs were found to exist mostly in the particulate phase of wastewater, which rendered sedimentation efficient for the removal of PBDEs. BDE-209 was the predominant congener in the influent and sludge. Most of the PBDEs entering the WWTPs presumably ended up in the sludge, with < 2% being discharged with the final effluent. According to the mass loading estimation, every day 2.55–9.29 g PBDEs entered the two WWTPs, 2.8–10.4 g were disposed to landfill sites in sludge form and 0.06–0.12 g were discharged to the surrounding water through final effluent, respectively. Preliminary results indicated that the ecological risk to organisms in soil exposed to PBDEs through the usage of sludge application to agricultural land was relatively low. To our knowledge, this study is the first to report on the removal efficiency of PBDEs in a WWTP in Korea.     

Precipitation of heavy metals in produced water: influence on contaminant transport and toxicity

Produced water undergoes changes in its physical chemistry including precipitation of heavy metals after being discharged and mixed with ambient seawater. Potential impacts of the precipitation of heavy metals on their transport and toxicity were studied using samples from offshore oil production sites on the Scotian Shelf off eastern Canada. Concentrations of aluminum, cadmium, chromium, cobalt, copper, iron, lead, manganese, nickel and zinc were measured in total, particulate and dissolved fractions together with Microtox tests for assessment of toxicity. Heavy metals in produced water were transformed from dissolved to particulate phase in a period of hours under oxygenated conditions, and aggregated to larger particles that settle rapidly (>100 m/day) over a few days. In addition, there was production of buoyant particles comprised of heavy metal precipitates sequestered onto oil droplets that were transported to the surface. The particulate fraction was generally more toxic than the dissolved fraction. This was evident at the mixing interface between produced water and seawater where elevated particulate and toxicity levels were observed. Laboratory studies suggest an increase in the toxicity of discharged produced water over time. Time-series experiments showed a sustained toxic response for more than a week following the oxidation of freshly discharged produced water that initially elicited little or no toxic response in the Microtox test. Chemical processes identified in this study, namely precipitation of heavy metals and consequent settling and rising fluxes of particles, will influence the toxicity, the fate and the transport of potential contaminants in the produced water. Therefore, these processes need to be considered in assessment of the environmental impact associated with offshore oil and gas operations.     

3D gravity modelling for Anyongbok Seamount in the East Sea

A seamount chain with an approximately WNW trend is observed in the northeastern Ulleung Basin. It has been argued that these seamounts, including two islands called Ulleung and Dok islands, were formed by a hotspot process or by ridge related volcanism. Many geological and geophysical studies have been done for all the seamounts and islands in the chain except Anyongbok Seamount, which is close to the proposed spreading ridge. We first report morphological characteristics, sediment distribution patterns, and the crustal thickness of Anyongbok Seamount using multibeam bathymetry data, seismic reflection profiles, and 3D gravity modeling. The morphology of Anyongbok Seamount shows a cone shaped feature and is characterized by the development of many flank cones and flank rift zones. The estimated surface volume is about 60 km³, and implies that the seamount is smaller than the other seamounts in the chain. No sediments have been observed on the seamount except the lower slope, which is covered by more than 1,000 m of strata. The crustal structure obtained from a 3D gravity modeling (GFR = 3.11, SD 3.82 = mGal) suggests that the seamount was formed around the boundary of the Ulleung Plateau and the Ulleung Basin, and the estimated crustal thickness is about 20 km, which is a little thicker than other nearby seamounts distributed along the northeastern boundary of the Ulleung Basin. This significant crustal thickness also implies that Anyongbok Seamount might not be related to ridge volcanism.     

A dynamic response analysis of tension leg platforms including hydrodynamic interaction in regular waves

A numerical procedure is described for predicting the motion and structural responses of tension leg platforms (TLPs) in waves. The developed numerical approach, in a TLP is assumed to be flexible instead of rigid, is based on a combination of the three dimensional source distribution method and the finite-element method. The hydrodynamic interactions among TLP members, such as columns and pontoons, are included in the motion and structural response analysis. Numerical results are compared with the experimental and numerical ones. The results of comparison confirmed the validity of the proposed approach.     

A B-spline based higher order panel method for analysis of steady flow around marine propellers

A higher order panel method based on B-spline representation for both the geometry and the solution is developed for the analysis of steady flow around marine propellers. The self-influence functions due to the normal dipole and the source are desingularized through the quadratic transformation, and then shown to be evaluated using conventional numerical quadrature. By selecting a proper order for numerical quadrature, the accuracy of the present method can be increased to the machine limit. The far- and near-field influences are shown to be evaluated based on the same far-field approximation, but the near-field solution requires subdividing the panels into smaller subpanels continuously, which can be effectively implemented due to the B-spline representation of the geometry. A null pressure jump Kutta condition at the trailing edge is found to be effective in stabilizing the solution process and in predicting the correct solution. Numerical experiments indicate that the present method is robust and predicts the pressure distribution on the blade surface, including very close to the tip and trailing edge regions, with far fewer panels than existing low-order panel methods.