Geology and Mineral Chemistry of Gold Mineralization in Mirge‐Naqshineh Occurrence (Saqez,NW Iran): Implications for Transportation and Precipitation of Gold

The Mirge-Naqshineh gold district is situated at northwest of Iran with a NW-trending brittleductile shear zone. It is hosted by Precambrian meta-sedimentary and meta-volcanic units traversed by mineralized quartz veins. In terms of cross-cutting relationships and sulfide content three types of quartz veins are identified in the region. Among those, parallel to bedding quartz vein(type Ⅰ) is the main host for gold mineralization. Gold is found in three different forms: 1) submicrometer-size inclusions of gold in arsenian pyrite, 2) as electrum and 3) in the crystal lattice of sulfides(pyrite, galena and chalcopyrite). Six types of pyrite(Py1-Py6) were identified in this ore reserve. Py3 coexists with arsenopyrite and contains the greatest As-Au concentrations. There is a negative correlation between the As and S contents in Py2 and Py3, implying the substitution of sulfur by arsenic. Pyrites and mineralized quartz veins were formed via metamorphic-hydrothermal fluid and reflect the gold-transportation as Au(HS)_2~- under reducing and acidic conditions. The gold precipitation mainly controlled by crystallization of arsenian pyrite during fluid/rock interactions and variation of fO_2. The volcanic host rock has played an important role in gold concentration, as Py3 in this rock contains inclusion of gold particles, but gold is within the lattice of pyrite in phyllite or other units.     

A late Pleistocene long pollen record from Lake Urmia, NW Iran

A palynological study based on two 100-m long cores from Lake Urmia in northwestern Iran provides a vegetation record spanning 200 ka, the longest pollen record for the continental interior of the Near East. During both penultimate and last glaciations, a steppe of Artemisia and Poaceae dominated the upland vegetation with a high proportion of Chenopodiaceae in both upland and lowland saline ecosystems. While Juniperus and deciduous Quercus trees were extremely rare and restricted to some refugia, Hippophaë rhamnoides constituted an important phanerophyte, particularly during the late last glacial period. A pronounced expansion in Ephedra shrub-steppe occurred at the end of the penultimate late-glacial period but was followed by extreme aridity that favoured an Artemisia steppe. Very high lake levels, registered by both pollen and sedimentary markers, occurred during the middle of the last glaciation and late part of the penultimate glaciation. The late-glacial to early Holocene transition is represented by a succession of Hippophaë, Ephedra, Betula, Pistacia and finally Juniperus and Quercus. The last interglacial period (Eemian), slightly warmer and moister than the Holocene, was followed by two interstadial phases similar in pattern to those recorded in the marine isotope record and southern European pollen sequences.     

Facies Analysis and Sequence Stratigraphy of Silurian Carbonate Ramps in the Turan (Kopeh-Dagh) and Central Iran Plates with Emphasis on Gondwana Tectonic Event

Two sections from the Silurian deposits in the Central Iran Micro and Turan Plates were measured and sampled. These deposits are mostly composed of submarine volcanic rocks, skeletal and non-skeletal limestone, shale and sandstone that were deposited in low to high energy conditions (from tidal flat to deep open marine). According to gradual deepening trend, wide lateral distribution of facies as well as absence of resedimentation deposits, a depositional model of a homoclinal ramp was proposed for these deposits. Field observations and facies distribution indicate that, two depositional sequences were recognized in both sections. These sections show similarities in facies and depositional sequence during the Early Silurian in the area. Although there are some opinions and evidences that demonstrated Paleo-Tethys rifting phase started at the Late Ordovician-Early Silurian, similarities suggest that the Turan and Iran Plates were not completely detached tectonic block during this time, and that their depositional conditions were affected by global sea level changes and tectonic events.     

Climate change impact on precipitation and cardinal temperatures in different climatic zones in Iran: analyzing the probable effects on cereal water-use efficiency

Global greenhouse gases increase could be a threat to sustainable agriculture since it might affect both green water and air temperature. Using the outputs of 15 general circulation models (GCMs) under three SRES scenarios of A1B, A2 and B1, the projected annual and seasonal precipitation (P) and cardinal temperatures (T) were analyzed for five climatic zones in Iran. In addition, the probable effects of climate change on cereal production were studied using AquaCrop model. Data obtained from the GCMs were downscaled using LARS-WG for 52 synoptic stations up to 2100. An uncertainty analysis was done for the projected P and T associated to GCMs and SRES scenarios. Based on station observations, LARS-WG was capable enough for simulating both P and T for all the climatic zones. The majority of GCMs as well as the median of the ensemble for each scenario project positive P and T changes. In all the climatic zones, wet seasons have a higher P increase than dry seasons, with the highest increase (27.9–83.3%) corresponding to hyper-arid and arid regions. A few GCMs project a P reduction mainly in Mediterranean and hyper-humid climatic regions. The highest increase (11.2–44.5%) in minimum T occurred in Mediterranean climatic regions followed by semi-arid regions in which a concurrent increase in maximum T (2.9–14.6%) occurred. The largest uncertainty in P and cardinal T projection occurred in rainy seasons as well as in hyper-humid regions. The AquaCrop simulation results revealed that the increased cardinal T under global warming will cause 0–28.5% increase in cereal water requirement as well as 0–15% reduction in crop yield leading to 0–30% reduction in water use efficiency in 95% of the country.     

Simulation of Power Production from Dry Geothermal Well Using Down-hole Heat Exchanger in Sabalan Field,Northwest Iran

In this research, a simulation was performed for evaluating power production from an abandoned geothermal well as an enhanced geothermal system by injecting a secondary fluid. Abandoned wells, due to lack of fluid or very low transmissivity, are regarded among the low-to moderate-temperature resources that have the potential for heat production without any cost for deep drilling. Accordingly, they are taken as suitable sources of energy. In the present paper, an abandoned geothermal well at Meshkinshahr geothermal field in Sabalan district, northwestern Iran, with 3176 m depth was simulated. The bottom-hole temperature of 148 °C, as well as well casing size, and real thermal gradient for well were applied in the model. A 3D heat transfer simulation model was designed by considering a coaxial pipe as a down-hole heat exchanger between surrounding rocks of the well and injected fluid. Injected fluid to the well with specified pressure and temperature receives heat from rocks surrounding the well, until it reaches the bottom of the well and converts to vapor. The vapor returns to the surface from inner pipe with very low heat loss during its return. The inner pipe is isolated by a thin layer having a low heat conductivity to prevent heat loss from the returned fluid. It was observed that obtained heat in the well depends on temperature profile of the well, injection velocity, and fluid mass flow rate. The model results were optimized by selecting suitable parameters such as inlet injection speed and fluid flow rate to achieve the highest temperature of the fluid returned from the well. A binary power plant was also modeled to determine the extractable power using returned fluid as input using ammonia and isobutene, as working fluids in binary cycle. Finally, electric power of 270 kW was generated from well NWS3 using designed down-hole heat exchanger.     

Prediction of the effect of water supplying from Shirindare dam on the Bojnourd aquifer using MODFLOW2000

In recent years, the water demand has been increasing considerably in Bojnourd, capital of Northern Khorasan province in NE of Iran, and the extracted water from Bojnourd alluvial aquifer, with an area of 65 km², is not sufficient for residents. The required water is going to be supplied from Shirindare dam, located out of Bojnourd aquifer’s catchment area; therefore, the groundwater levels will rise in some parts of the aquifer, due to the return flow of supplied water, which will cause serious problems for the city. In this paper, the groundwater flow system of Bojnourd aquifer has been numerically simulated using MODFLOW code in GMS interface. The model, primarily, was calibrated for a steady state condition for the mean values of oneyear period (Sep. 2009 to Sep. 2010) which has a steady condition with low stresses on the aquifer. Then the model was run/calibrated for transient conditions for a two year period (Sep. 2007 to Sep. 2009). After determining the hydraulic properties of the aquifer and confirming their validity, different management scenarios, were applied to the model. Results reveal that groundwater levels in the urban area will rise by over 3 m, by infiltrating 40% of supplied water from the Shirindare dam into the aquifer. To manage the rising water levels, two different management scenarios were applied to the aquifer model. In doing so and with proper management of aquifer exploitation during critical situations, not only will the groundwater level drop; also the city of Bojnourd can develop urban landscaping by constructing sports/cultural camping area using the extra pumped water.     

Rock Type Identification Using Analysis of the Acoustic Signal Frequency Contents Propagated While Drilling Operation

Geotechnical and Geological Engineering - One of the most important parameters specially in mining and oil drilling fields is the type of rocks. It is important to determine that rock structure is...     

Assessment of seismic amplification factor of excavation with support system

Retaining walls have been used in many construction projects such as for road and inclined surfaces protection. The damage caused by an earthquake depends on the fundamental frequency, amplitude and the duration of the seismic motion. These parameters strongly depend on the seismic properties of the layers that are near the surface. In the study of retaining walls, in addition to the influence of soil, the influence of topography is also important. In the present study, site response analysis is performed by using finite element software PLAXIS to obtain the effect of various factors such as embedded length of the sheet pile, underground water table, length and angle of the nail, shear wave velocity of soil on site effect and dynamic response. Moreover, for better understanding of the effect of the above parameters, the stability analysis was performed by using shear reduction method. The results show that an increase in the embedded length of the sheet pile and the length of nailing causes an increase in the amplification factor. Moreover, for shear-wave velocity in the range of 200-600 m/s, the amplification factor increases with increase of the shear-wave velocity due to the decrease of nonlinear behavior.