The Impact of the Degree of Aquifer Confinement and Anisotropy on Tidal Pulse Propagation

Oceanic tidal fluctuations which propagate long distances up coastal rivers can be exploited to constrain hydraulic properties of riverbank aquifers. These estimates, however, may be sensitive to degree of aquifer confinement and aquifer anisotropy. We analyzed the hydraulic properties of a tidally influenced aquifer along the Meghna River in Bangladesh using: (1) slug tests combined with drilling logs and surface resistivity to estimate Transmissivity (T); (2) a pumping test to estimate T and Storativity (S) and thus Aquifer Diffusivity (D_PT); and (3) the observed reduction in the amplitude and velocity of a tidal pulse to calculate D using the Jacob‐Ferris analytical solution. Average Hydraulic Conductivity (K) and T estimated with slug tests and borehole lithology were 27.3 m/d and 564 m²/d, respectively. Values of T and S determined from the pumping test ranged from 400 to 500 m²/d and 1 to 5 × 10^?4, respectively with D_PT ranging from 9 to 40 × 10⁵ m²/d. In contrast, D estimated from the Jacob‐Ferris model ranged from 0.5 to 9 × 10⁴ m²/d. We hypothesized this error resulted from deviations of the real aquifer conditions from those assumed by the Jacob‐Ferris model. Using a 2D numerical model tidal pulses were simulated across a range of conditions and D was calculated with the Jacob‐Ferris model. Moderately confined (K_top/K_aquifer < 0.01) or anisotropic aquifers (K_x/K_z > 10) yield D within a factor of 2 of the actual value. The order of magnitude difference in D between pumping test and Jacob‐Ferris model at our site argues for little confinement or anisotropy.     

Spatial and seasonal distribution of intertidal macrobenthos with their biomass and functional feeding guilds in the Naf River estuary,Bangladesh

The Naf River estuary is one of the most productive ecological ecosystems in Bangladesh providing an important feeding area for fishes and other aquatic animals. However, detailed information on macrobenthic communities is rarely available in this area. Our study focused on the seasonal and spatial variability of macrobenthic community structure with their biomass and functional guilds. In total, fortyseven taxa were identified under nine major groups and seven functional feeding guilds. Among macrobenthic taxa, Polychaeta was dominant in both seasons and all over the estuary contributing 60% of total benthos.The mean abundance of macrobenthos was higher during the pre-monsoon(2 972±1 994 inds./m~2) than the monsoon(1 572±361 inds./m~2) being maximum at mid-estuary region and minimum at upper and lower estuary regions. Of the diversity indices, density(P=0.01, P=0.003), the number of taxa(P=0.000 3,P=0.000 9) and Margalefs Index(P=0.000 4, P=0.001) of macrobenthos were significantly different among stations and seasons. Shannon-Weiner index(P=0.009, P=0.12) and Pielou's evenness index(P=0.03,P=0.14) had significant differences among stations but not among seasons. Cluster analysis suggested that distribution of macrofauna is strongly influenced by seasonality. Among the feeding types, carnivorous were found to be dominant at the upper and mid-estuarine regions, and herbivorous were at lower estuarine regions. Carnivorous species were dominant in both seasons. Omnivores have shown to be the most abundant feeding type in terms of biomass though herbivores were highest during monsoon.     

Water and sediment quality parameters in the Chalan Beel,the largest wetland of Bangladesh

A study was conducted to investigate the status of the water and sediment quality in the Chalan Beel——a major fresh water fish reservoir of the country for a period of one year from July 2007 to June 2008. The mean values of water quality parameters(depth: 214.73±152.22 cm, temperature 27.68±4.26℃, transparency 123±82 cm, p H 9.7±0.47, total alkalinity 137±42 mg/L, conductivity 307±147 μs/cm, total dissolved solids 183±89 mg/L, ammonia-N 0.27±0.39 mg/L, nitrate-N 0.09±0.07 mg/L, phosphate-P 2.01±2.53 mg/L) and sediment quality parameters(p H 7.21±0.35, organic matter 2.59±0.52%, total nitrogen 0.09±0.04%, available phosphorus 5.4±3.6 Meq./100 g and exchangeable potassium 0.43±0.14 Meq./100 g) were within the range recommended for most of the inland fishes of Bangladesh. Although the water and sediment quality parameters except ammonia and phosphate are in the suitable range, the overall results suggest that better management techniques should be practiced in order to overcome the declining trend of associated aquatic life(fauna and flora) of this important fresh water body of Bangladesh.     

Dynamics of arsenic adsorption in the targeted arsenic-safe aquifers in Matlab, south-eastern Bangladesh: Insight from experimental studies

Targeting shallow low-As aquifers based on sediment colour may be a viable solution for supplying As-safe drinking water to rural communities in some regions of Bangladesh and West Bengal in India. The sustainability of this solution with regard to the long-term risk of As-safe oxidized aquifers becoming enriched with As needs to be assessed. This study focuses on the adsorption behaviour of shallow oxidized sediments from Matlab Region, Bangladesh, and their capacity to attenuate As if cross-contamination of the oxidized aquifers occurs. Water quality analyses of samples collected from 20 tube-wells in the region indicate that while there may be some seasonal variability, the groundwater chemistry in the reduced and oxidized aquifers was relatively stable from 2004 to 2009. Although sediment extractions indicate a relatively low amount of As in the oxidized sediments, below 2.5 mg kg⁻¹, batch isotherm experiments show that the sediments have a high capacity to adsorb As. Simulations using a surface complexation model that considers adsorption to amorphous Fe(III) oxide minerals only, under-predict the experimental isotherms. This suggests that a large proportion of the adsorption sites in the oxidized sediments may be associated with crystalline Fe(III) oxides, Mn(IV) and Al(III) oxides, and clay minerals. Replicate breakthrough column experiments conducted with lactose added to the influent solution demonstrate that the high adsorption capacity of the oxidized sediments may be reduced if water drawn down into the oxidized aquifers contains high levels of electron donors such as reactive dissolved organic C.     

Provenance, tectonics and source weathering of modern fluvial sediments of the Brahmaputra–Jamuna River, Bangladesh: Inference from geochemistry

This present study describes the elemental geochemistry of fluvial sediments in the Kurigram (upstream) to Sirajganj–Tangail (downstream) section of the Brahmaputra–Jamuna River, Bangladesh, with the aim of evaluating their provenance, weathering and tectonic setting. Petrographically, the sediments are rich in quartz (68%), followed by feldspars (8.5%) and lithic grains (7%). The bulk sediment chemistry is influenced by grain size. Concentrations of TiO₂, Fe₂O₃, MgO, K₂O, P₂O₅, Rb, Nb, Cr, V, Y, and, Ce, Th and Ga slightly decrease with increasing SiO₂/Al₂O₃ and grain size, suggesting clay matrix control. In contrast, concentrations of CaO, Na₂O, Sr and Pb increase with increasing SiO₂/Al₂O₃ and grain size, suggesting residence of these substances in feldspar. Decrease in Zr as grain size increases is likely controlled both by clay matrix and heavy minerals. In addition, heavy minerals' sorting also influences Ce, Th, Y and Cr abundances in some samples. The sediments are predominantly quartzose in composition with abundant low-grade metamorphic and sedimentary lithics, low feldspars and trace volcanic detritus, indicating a quartzose recycled orogen province as a source of the sediments. Discriminant diagrams together with immobile element ratio plots show that, the Brahmaputra–Jamuna River sediments are mostly derived from rocks formed in an active continental margin. Moreover, the rare earth element ratios as well as chondrite-normalized REE patterns with flat HREE, LREE enrichment, and negative Eu anomalies indicate derivation of the sediments of Brahmaputra–Jamuna River from felsic rock sources of upper continental crust (UCC). The chemical indices of alteration suggest that Brahmaputra–Jamuna River sediments are chemically immature and experienced low chemical weathering effects. In the A–CN–K ternary diagram, most of the samples close to the plagioclase–K-feldspar join line and to the UCC plot, and in the field of various lithologies of Higher Himalayan Crystalline Series, suggesting that rocks in these series are likely source rocks. Therefore, the elemental geochemistry of the Brahmaputra–Jamuna River sediments is controlled mostly by mechanical breakdown of lithic fragments and subsequent preferential attrition of muscovite > albite > quartz.     

Geoelectrical resistivity survey for the evaluation of hydrogeological condition of Bagerhat Sadar and the adjacent areas, Bangladesh

This study has been conducted to find out the aquifer characteristics of Bagerhat Sadar and adjacent areas in Bangladesh using geoelectrical resistivity method and borehole logs. The interpretation of resistivity soundings (14 nos.) shows that the sub-surface lithological sequence can be divided into four geoelectric units. The deepest geoelectric unit (with resistivity from 8 Ohm-m to 18 Ohm-m) represents the deep aquifer with usually fresh water. Resistivity values of 12 ?m or more for this unit may indicate formation water as acceptable for coastal people. In the study area, the shallow aquifer inferred is not suitable for groundwater development.     

Groundwater arsenic contamination in Ganga–Meghna–Brahmaputra plain, its health effects and an approach for mitigation

The authors’ survey of the Ganga–Meghna–Brahmaputra (GMB) plain (area 569,749 km²; population >500 million) over the past 20 years and analysis of more than 220,000 hand tube-well water samples revealed groundwater arsenic contamination in the floodplains of the Ganga–Brahmaputra river (Uttar Pradesh, Bihar, Jharkhand, West Bengal, and Assam) in India and the Padma–Meghna–Brahmaputra river in Bangladesh. On average, 50 % of the water samples contain arsenic above the World Health Organization guideline value of 10 μg/L in India and Bangladesh. More than 100 million people in the GMB plain are potentially at risk. The authors’ medical team screened around 155,000 people from the affected villages and registered 16,000 patients with different types of arsenical skin lesions. Arsenic neuropathy and adverse pregnancy outcomes have been recorded. Infants and children drinking arsenic-contaminated water are believed to be at high risk. About 45,000 biological samples analyzed from arsenic-affected villages of the GMB plain revealed an elevated level of arsenic present in patients as well as non-patients, indicating that many are sub-clinically affected. In West Bengal and Bangladesh, there are huge surface water in rivers, wetlands, and flooded river basins. In the arsenic-affected GMB plain, the crisis is not over water scarcity but about managing the available water resources.     

Clustering of mineral prospectivity area as an unsupervised classification approach to explore copper deposit

This paper describes the usage of clustering methods including self-organizing map (SOM) and fuzzy c-means (FCM) which are applied to prepare mineral prospectivity map. Different evidential layers, including geological, geophysical, and geochemical, to evaluate Now Chun copper deposit located in the Kerman province of Iran are used. Clustering approaches are used to reduce the dimension of 13 feature vectors derived from different layers. At first, Geospatial Information Systems (GIS) is employed to analyze and integrate different layers, and the area under study is prioritized to five classes. Then, the SOM as an unsupervised classification method is carried out to classify this area into five clusters. Produced clusters are compared with GIS prospect map, while the SOM results are matched with the GIS output. The main reason to use the FCM is that a vector belongs simultaneously to more than one cluster so that membership values of each cluster can be mapped. As a consequence, clusters generated by the SOM and FCM are considerably matched with five-class-map of the GIS approach. The chosen cluster as a high potential location to additional drilling is matched to the main alteration and faults zone. To validate generated clusters for mineral potential mapping, geological matching of study area and selected proper cluster can be a satisfactory way. Finally, clustering methods can be a very fast approach to interpret the area under study.