流形上的空间密度聚类算法研究

研究流形上的聚类分析，针对基于密度的空间聚类引入了流形概念，提出1种基于流形的密度聚类算法，该方法将流形的概念与聚类相结合，可以适用于样本为复杂分布的聚类。文中通过实例证明此算法的有效性。     

Gradation affects basic mechanical characteristics of Chinese calcareous sand as airport subgrade of reefs

Abstract

Construction of the reefs in the South China Sea is a significant foundation to the secure stability and economic development of China. The construction of an airport runway is necessary for this realization. The calcareous sand is the main primary material in the runway construction. A certain type of calcareous sand near a certain reef of the South China Sea was studied in this paper. To investigate this specific calcareous sand, quartz sand was used as a reference for comparison. Microscopic 3-D imaging, compression and triaxial tests were conducted to test the micro, squeezing and shear properties. The effect mechanism of gradation on the calcareous sand’s compressibility and shear characteristics are discussed from a mesoscopic viewpoint using 3-D morphology. Calcareous sand particles are multiangular and flatter in comparison with quartz sand. The larger the particle sizes are, the more different the two sands’ morphologies are. The compressibility of calcareous sand is greater, and the effect of the coarse fraction (5–1?mm) content in the gradation plays the most significant role in this feature. When the coarse particles’ content is less than 25% and the mass ratio of the middle and fine particles (M) is constant, there is the worst coarse fraction content causing the calcareous sand to be most likely compressed. The worst coarse fraction content decreases with the increase in M, and an empirical formula is proposed. When the gradation, relative density and confining pressure are the same, the peak shear stress and strain of calcareous sand are all at a high level. The effect of confining pressure is manifested in calcareous sand. The shear strength and dilation of calcareous sand are also most affected by the medium coarse fraction (5–0.25?mm) content.     

Evaluation of bending moments and shear forces at unit connections of very large floating structures using hydroelastic and rigid body analyses

This paper investigates the characteristics of bending moments, shear forces and stresses at unit connections of very large floating structures (VLFS) under wave loads. The responses of VLFS are calculated by solving multi-body motion equation considering hydroelasticity and connection stiffness. Hydroelastic responses are calculated by the direct method. Higher-order boundary element method (HOBEM) is used for fluid analysis and finite element method (FEM) is introduced for structural analysis. The equation of motion is modified to describe the unit connections by employing spring elements. Bending moments and shear forces at the connections are obtained from the dynamic equilibrium condition for pressures and inertia forces. Two types of VLFS units such as tandem arranged units and side-by-side arranged units are considered in the numerical examples. The influences of connection stiffness, wave frequency and heading angle on responses of VLFS are investigated through the numerical examples. Rigid body analysis along with hydroelastic analysis is also carried out in the numerical analysis and comparison of those two approaches is discussed.     

Parabolic Wave Propagation Modelling in Orthogonal Coordinate Systems

This paper presents a numerical model study of the propagation of water waves using the parabolic approximation of the mild-slope equation in the orthogonal coordinate system. Two types of coordinate systems are studied: (a) a general form of orthogonal coordinate system and (b) the conformal system, a special form of orthogonal coordinate system. Two typical examples, namely, expanded breakwaters and a circular channel, are studied to validate the model. First, the examples are studied by use of the general orthogonal coordinates. Then the same examples are computed by use of the confonnal system. The computational results show that the confonnal coordinate system generally gives better predictions than the general orthogonal system. A numerical technique for generating the conformal grid is combined with the numerical model to improve the practicability of the model. The comparison between the result from the numerical grid system and that from the analytical grid system shows that reliable computational results can be obtained by use of the numerical confonnal grid system.     

夏、冬两季长江口及邻近海域悬浮物的分布特征及其沉积量

利用2001年7～8月 ,2002年1月两个航次的悬浮物浓度资料 ,并参考其它水文参数 ,简要分析长江口及邻近海域悬浮物的分布特征 :无论夏季还是冬季 ,长江入海悬浮物总是向东南方输运 ;冬季由于再悬浮作用显著 ,悬浮物浓度明显高于夏季 ,且南北分布范围也明显增大 ,垂向分布均匀。同时采用数值模拟的海流流速值和观测的悬浮物浓度值计算悬浮物的断面通量 ,并最终得计算区悬浮物夏、冬两季的沉积量 ,夏、冬季长江口及邻近海域悬浮物的沉积量分别为0.79×108t,1.44×108t。     

弧后盆地的形成与演化探讨：以东亚陆缘区为例

通过对弧后盆地大地构造体制的讨论，作者认为基属活化作用的产物根据地质，地球物理，地球化学等资料的分析，作者提出结论认为，由于东亚岛弧系岩石圈的均衡作用及海沟外侧冷却大洋岩石圈块体的下沉拖曳牵引等作用，使软流圈在岛弧系下方发生分异，这种分异作用带动东亚陆缘向东扩张，从而产生弧后的张开。     

In Situ Measurement of Pinna nobilis Shells for Age and Growth Studies: A New Device

Abstract. Pinna nobilis Linnaeus 1758 is an endemic bivalve mollusc in the Mediterranean Sea, where it inhabits seagrass meadows, especially Posidonia oceanica (L.) Delile. It is the largest bivalve in the Mediterranean, reaching lengths up to 120 cm. In its natural habitat, P. nobilis lives with the anterior part of the valve buried in the seabed, attached to Posidonia rhizomes by byssus threads.
This habit makes it impossible to measure its total length directly in situ. As the only way to determine the individual age is the relationship between age and total length, several equations have been proposed to estimate total length by relating it to the unburied parts of the shell. Such measurements are essential to ecological studies that consider age, growth, and population dynamics, and that evaluate the environmental factors that affect this species.
Accurately estimating total length depends on the accuracy and precision of the method employed to measure the unburied shell parts. In this paper, we point out the lack of precision of the instruments and methods used until now; we also demonstrate the reason for this imprecision. A new device to measure unburied parts of Pinna nobilis with a precision comparable to that obtained when measuring extracted valves is described. This device is unaffected by substratum type and reduces measurement time. The latter is a very important feature, because these procedures are usually performed whilst SCUBA diving. Finally, a growth equation has been fitted to the measurements obtained with the new device from a population located in Moraira (Alicante, western Mediterranean).     

台湾的弧陆碰撞研究及其地层沉积构造研究年表

对台湾及其邻近地区典型板块构造弧陆碰撞运动的研究历史沿革与代表性观点进行了较为全面的介绍;将1977年颜沧波有关台湾及其邻近地区典型板块构造弧陆碰撞运动研究的观点与30年后黄奇瑜教授的研究成果进行了对比性介绍;同时介绍了反映台湾及其邻近地区典型板块构造弧陆碰撞运动的地层沉积构造综合研究年表。     

地层学的发展推动油气地质理论研究的进步

自上个世纪50年代以来,地层学经历了彻底的变革,逐渐由“相模式”、“沉积体系”、“地震地层学”发展到目前的“层序地层学”,形成高分辨率层序地层学和事件地层学的理论体系和研究方法。文章围绕层序地层学、高分辨率层序地层学基本方法及理论体系,与含油气系统相关关系进行了讨论。     

黄河三角洲河道沉积规律研究Ⅱ. 建林边滩沉积作用机理

通过对建林边滩沉积物粒度分布、粒度参数及水体流变性质的分析，阐述了黄河三角洲上河道水流属于牵引流范畴，与低含沙水流无本质上的差别，并探讨沉积物搬运和沉积的基本特征。