Geochemistry of the Grenville Dyke Swarm: role of plume-source mantle in magma genesis

Major and trace element data of samples from the approximately 590 Ma Grenville dyke swarm, in the southeastern parts of the Canadian Shield, were used to evaluate the extent of crustal contamination of the dyke magma and to model its probable mantle source. The dyke rocks are mostly saturated, quartz tholeiites. A few samples represent transitional basalts. Their overall chemistries are similar to those of continental flood basalts. Their compositions resemble those of liquids initially produced in the garnet peridotite mantle zone and then subjected to polybaric fractionation. However, fractionation models fail to mass-balance Ti, Fe, K, and P. Geochemical and isotopic criteria indicate that crustal contamination was minimal. The incompatible elements Zr, Y, K, Rb, Nb, V, Ta, Hf, and Th show hyperbolic elemental ratio-ratio distributions indicative of mixing between two end-members. One end-member has elemental ratios similar to those of a depleted N-MORB source and the second of a P-MORB i.e. ertile or plume MORB source. The more enriched dyke compositions can be successfully reproduced by mixing models in the ratio of 6:1 between the most depleted MORB-like dyke magma and a liquid composition similar to metasomatic glass veinlets coexisting with mica peridotite mantle xenoliths, and subsequent crystal fractionation. The Grenville dykes are probably a synrift swarm that was emplaced along a rift arm related to an Iapetan rrr triple junction that is thought to have formed over a mantle plume. The chemistry of the dyke swarm is consistent with its derivation from a plume head, in that the minor enriched source can be identified with plume-source mantle and the major depleted source with entrained mantle. The magma probably originated in the upper cooler parts of the plume head.     

Microfabrics of calcite ultramylonites as records of coaxial and non-coaxial deformation kinematics: Examples from the Rocher de l'Yret shear zone (Western Alps)

Microfabrics were analysed in calcite mylonites from the rim of the Pelvoux massif (Western Alps, France). WNW-directed emplacement of the internal Penninic units onto the Dauphinois domain produced intense deformation of an Eocene-age nummulitic limestone under lower anchizone metamorphic conditions (slightly below 300 °C). Two types of microfabrics developed primarily by dislocation creep accompanied by dynamic recrystallisation in the absence of twinning. Coaxial kinematics are inferred for samples exhibiting grain shape fabrics and textures with orthorhombic symmetry. Their texture (crystallographic preferred orientation, CPO) is characterised by two c-axis maxima, symmetrically oriented at 15° from the normal to the macroscopic foliation. Non-coaxial deformation is evident in samples with monoclinic shape fabrics and textures characterised by a single oblique c-axis maximum tilted with the sense of shear by about 15°. From the analysis of suitably oriented slip systems for the main texture components under given kinematics it is inferred that the orthorhombic textures, which developed in coaxial kinematics, favour activity of <10–11> and <02–21> slip along the f and r planes, respectively, with minor contributions of basal-<a> slip. In contrast, the monoclinic textures, which developed during simple shear, are most suited for duplex <a> slip along the basal plane. The transition between the dominating slip systems for the orthorhombic and monoclinic microfabrics is interpreted to be due to the effects of dynamic recrystallisation upon texture development. Since oblique c-axis maxima documented in the literature are most often rotated not with but against the shear sense, calcite textures alone should not be used as unequivocal shear sense indicators, but need to be complemented by microstructural criteria such as shape preferred orientations, grain size estimates and amount of twinning.     

Comparative Seismic Risk Studies for German Earthquake Regions on the Basis of the European Macroseismic Scale EMS-98

Within the framework of recent research projects, basic tools for GIS-based seismic risk assessment technologies were developed and applied to the building stock and regional particularities of German earthquake regions. Two study areas are investigated, being comparable by the level of seismic hazard and the hazard-consistent scenario events (related to mean return periods of 475, 2475 and 10000 years). Significant differences exist with respect to the number of inhabitants, the grade and extent of urbanisation, the quality and quantity of building inventory: the case study of Schmölln in Eastern Thuringia seems to be representative for the majority of smaller towns in Germany, the case study of Cologne (Köln) stands for larger cities. Due to the similarities of hazard and scenario intensities, the considerable differences do not only require proper decisions concerning the appropriate methods and acceptable efforts, they enable conclusions about future research strategies and needs for disaster reduction management. Not least important, results can sharpen the focus of public interest. Seismic risk maps are prepared for different scenario intensities recognising the scatter and uncertainties of site-dependent ground motion and also of the applied vulnerability functions. The paper illustrates the impact of model assumptions and the step-wise refinements of input variables like site conditions, building stock or vulnerability functions on the distribution of expected building damage within the study areas. Furthermore, and in contrast to common research strategies, results support the conclusion that in the case of stronger earthquakes the damage will be of higher concentration within smaller cities like Schmölln due to the site-amplification potential and/or the increased vulnerability of the building stock. The extent of damage will be pronounced by the large number of masonry buildings for which lower vulnerability classes have to be assigned. Due to the effect of deep sedimentary layers and the composition of building types, the urban centre of Cologne will be less affected by an earthquake of comparable intensity.     

Initiation and development of pull-apart basins with Riedel shear mechanism: insights from scaled clay experiments

Typical pull-apart structures were created in scaled clay experiments with a pure strike-slip geometry (Riedel type experiments). A clay slab represents the sedimentary cover above a strike-slip fault in the rigid basement. At an early stage of the development of the deformation zone, synthetic shear fractures (Riedel shears) within the clay slab display dilatational behaviour. With increasing basal displacement the Riedel shears rotate and open further, developing into long, narrow and deep troughs. The shear displacement and the low angle with the prescribed principal basal fault set them apart from tension gashes. At a more evolved stage, synthetic segments (Y-shears) parallel to the basal principal fault develop and accommodate progressive strike-slip deformation. The Y-shears connect the tips of adjacent troughs developed from the earlier Riedel shears, resulting in the typical rhomb-shaped structures characteristic for pull-apart basins. The Strait of Sicily rift zone, with major strike-slip systems being active from the Miocene to the Present, comprises pull-apart basins at different length scales, for which the structural record suggests development by a mechanism similar to that observed in our experiments.     

The eastern Tonale fault zone: a ‘natural laboratory’ for crystal plastic deformation of quartz over a temperature range from 250 to 700 °C

Near the eastern end of the Tonale fault zone, a segment of the Periadriatic fault system in the Italian Alps, the Adamello intrusion produced a syn-kinematic contact aureole. A temperature gradient from 250 to 700 °C was determined across the Tonale fault zone using critical syn-kinematic mineral assemblages from the metasedimentary host rocks surrounding deformed quartz veins. Deformed quartz veins sampled along this temperature gradient display a transition from cataclasites to mylonites (frictional–viscous transition) at 280±30 °C. Within the mylonites, zones characterized by different dynamic recrystallization mechanisms were defined: Bulging recrystallization (BLG) was dominant between 280 and 400 °C, subgrain rotation recrystallization (SGR) in the 400–500 °C interval, and the transition to dominant grain boundary migration recrystallization (GBM) occurred at 500 °C. The microstructures associated with the three recrystallization mechanisms and the transitions between them can be correlated with experimentally derived dislocation creep regimes. Bulk texture X-ray goniometry and computer-automated analysis of preferred [c]-axis orientations of porphyroclasts and recrystallized grains are used to quantify textural differences that correspond to the observed microstructural changes. Within the BLG- and SGR zones, porphyroclasts show predominantly single [c]-axis maxima. At the transition from the SGR- to the GBM zone, the texture of recrystallized grains indicates a change from [c]-axis girdles, diagnostic of multiple slip systems, to a single maximum in Y. Within the GBM zone, above 630±30 °C, the textures also include submaxima, which are indicative of combined basal a- and prism [c] slip.     

Post-mid-Cretaceous eastern North Sea evolution inferred from 3D thermo-mechanical modelling

The Late Cretaceous–Cenozoic evolution of the eastern North Sea region is investigated by 3D thermo-mechanical modelling. The model quantifies the integrated effects on basin evolution of large-scale lithospheric processes, rheology, strength heterogeneities, tectonics, eustasy, sedimentation and erosion.

The evolution of the area is influenced by a number of factors: (1) thermal subsidence centred in the central North Sea providing accommodation space for thick sediment deposits; (2) 250-m eustatic fall from the Late Cretaceous to present, which causes exhumation of the North Sea Basin margins; (3) varying sediment supply; (4) isostatic adjustments following erosion and sedimentation; (5) Late Cretaceous–early Cenozoic Alpine compressional phases causing tectonic inversion of the Sorgenfrei–Tornquist Zone (STZ) and other weak zones.

The stress field and the lateral variations in lithospheric strength control lithospheric deformation under compression. The lithosphere is relatively weak in areas where Moho is deep and the upper mantle warm and weak. In these areas the lithosphere is thickened during compression producing surface uplift and erosion (e.g., at the Ringkøbing–Fyn High and in the southern part of Sweden). Observed late Cretaceous–early Cenozoic shallow water depths at the Ringkøbing–Fyn High as well as Cenozoic surface uplift in southern Sweden (the South Swedish Dome (SSD)) are explained by this mechanism.

The STZ is a prominent crustal structural weakness zone. Under compression, this zone is inverted and its surface uplifted and eroded. Contemporaneously, marginal depositional troughs develop. Post-compressional relaxation causes a regional uplift of this zone.

The model predicts sediment distributions and paleo-water depths in accordance with observations. Sediment truncation and exhumation at the North Sea Basin margins are explained by fall in global sea level, isostatic adjustments to exhumation, and uplift of the inverted STZ. This underlines the importance of the mechanisms dealt with in this paper for the evolution of intra-cratonic sedimentary basins.     

A Simplified Analytical Procedure for the Determination of Organically Bound Halogens in Salt‐containing Water Samples

A method was developed for the determination of organic halogens in water samples with the aim of minimizing matrix effects and simplifying the sample preparation technique commonly used. The method is based on the adsorption of organic halogens in modified hydrophilic divinylbenzene polymer columns and their elution with methanol. The adsorbent used enables rapid adsorption and desorption due to comparatively high operating flow rates and minimized solvent amounts. Furthermore, no additional reconcentration steps are needed. The methanol extract obtained is combusted with a standard EOX (extractable organic halogen) analyzer and the concentration of organically bound halogens is determined by microcoulometric analysis. The matrix effects are considerably reduced compared to the standard procedure (EN 1485) commonly used. A detection limit of 13 μg/L was established.     

Wrench tectonics flip at oblique subduction. A model from New Zealand

In eastern North Island New Zealand, oblique subduction of the Pacific Plate beneath the Australian Plate is associated with strain partitioning. Dextral along-strike component of displacement occurred first at Early Miocene major faults within the eastern fore-arc domain. These faults were active from Early Miocene to Pliocene times. Since Pliocene times, most of the movement occurs at western faults such as the Wellington Fault. The latter joins the back-arc domain to the north. The jump of wrench faulting is related to the oblique opening of the back-arc domain. Both phenomena are impeded southwards by the Hikurangi oceanic plateau entering the subduction zone. To cite this article: J. Delteil et al., C. R. Geoscience 335 (2003).     

A New Tethered Balloon-Borne Payload for Fine-Scale Observations in the Cloudy Boundary Layer

A new scientific payload is introduced for fine-scale measurements of meteorological (wind vector, static air temperature, humidity, and air pressure) and microphysical (aerosol particles and cloud droplets) properties, suspended below a tethered balloon. The high resolution sensors and the tethered balloon are described. Measurements in a lifted fog layer from a first field campaign are presented.The detailed investigation of the fog/haze and the temperature inversion layer demonstrates the damping influence of the fog on temperature fluctuations, while thewind fluctuations are significantly decreased by theevolving temperature inversion, whichwas about 30 m above the fog layer.From spectral analysis the noise floors of the high-resolution sensors are determined to10^-6 kg m^-3 for the LWC (liquid water content) and 4 mK for the fast temperature sensor (UFT-B). The correlation betweentemperature and LWC structures in shallow haze layers is investigated. The release of latent heat and the corresponding warming in the haze of about 0.1 K could be quantified.     

Methodical approach to distribution of epilithic and drifting algae communities in a French subalpine river: Inferences on water quality assessment

In a sub-alpine river, the Asse, with an unpredictable discharge regime, chlorophyll, density and taxonomic diversity of both drifting and periphytic communities were studied from a methodical approach. The investigations based on stamping two close cross-sections to know their spatial distributions in a heterogeneous bed substrate showed a heterogeneous pattern of colonization mainly influenced by hydrological variables as the current velocity, the size of the substrata (gravel-pebble-boulder). For the drifting algae, mainly composed with benthic species temporarily unhooked to the substrata, the heterogeneity of the distribution was reduced in fast flow which induced a mixing of the whole mass of water. For the periphyton, some results indicated that the greatest diversity and the highest chlorophyll concentration were found on pebble substratum where the current velocity was moderate. These results have also shown that the classical methods used to day for investigations were inadequate for most Mediterranean rivers. It was really difficult to estimate the water quality from classical index created for use in regular large plain rivers.