Holocene and Eemian climatic optima in the Korean Peninsula based on textural and carbon isotopic records from the stalagmite of the Daeya Cave,South Korea

Textural and stable isotopic records from the absolute-dated stalagmite of the Daeya Cave (DY-1) provide new insights into the climatic evolution of the Korean Peninsula during the Holocene and Eemian climatic optima. The stalagmite yielded ages of 8572 ± 227 to 5907 ± 158 and 1,23,456 ± 535 to 1,19,837 ± 1089 years, which coincide with the Holocene and Eemian climatic optima, respectively. The stalagmite’s δ¹³C record closely resembles previously reported Chinese speleothem δ¹⁸O data. Thus it can be suggested that textural and geochemical results of the DY-1 reflect East Asian monsoon intensity, which is forced by summer insolation patterns in the northern hemisphere. Lighter carbon isotopic compositions, well-developed fibrous calcite crystals, and their relatively faster growth rate in the stalagmite sample are interpreted to reflect the warmest and wettest climate conditions of the Holocene and Eemian interglacials. Both climatic optima took place when insolation was decreasing from its maximum level, temperature in Greenland was highest, and sea level approached its maximum level. These climatic optima also coincide with decreasing Antarctic temperatures. Compared the DY-1 data to other proxies, it is suggested that the Holocene and Eemian climatic optima developed through a balance among boreal insolation, monsoon intensity, and sea level (also continental ice volume), which are the main climatic forcing factors in the northern hemisphere. These trends also follow the bi-polar seesaw mechanism as previously described.     

Three‐dimensional simulation of tsunami run‐up around conical island

At the circular Babi Island in the Flores tsunami (1992) and pear shaped island in the Okushiri event (1993), unexpectedly large tsunami run‐up heights in the lee of conic islands were observed. The flume and basin physical model studies were conducted in the Coastal Hydraulic Laboratory, Engineering Research and Development Center, U.S. Army Corps of Engineers to provide a better understanding of the physical phenomena and verify numerical models used in predicting tsunami wave run‐up on beaches, islands, and vertical walls. Reasonably accurate comparison of run‐up height of solitary waves on a circular island has been obtained between laboratory experimental results and two‐dimensional computation model results. In this study we apply three‐dimensional RANS model to simulate wave run‐up on conical island. In the run‐up computation we obtain that 3D calculations are in very good comparison with laboratory and 2D numerical results. A close examination of the three‐dimensional velocity distribution around conical island to compare with depth‐integrated model is performed. It is shown that the velocity distribution along the vertical coordinate is not uniform: and velocity field is weaker in the bottom layer and higher on the sea surface. The maximum difference (about 40%) appears at the time when solitary wave reached the circular island.     

Aquifer Characterization Using Fiber Bragg Grating Multi-Level Monitoring System

Groundwater responses measured from multiple wells at different depths are essential for delineating the aquifer heterogeneity using hydraulic tomography (HT). In general, conducting HT requires many wells because traditional well monitoring is usually partially open at a specific depth interval or is fully penetrating. Accordingly, conducting an HT survey is typically costly and time-consuming. To tackle these issues, a new multi-level monitoring system (MLMS) for the HT survey was developed using the fiber Bragg grating (FBG) technique. This FBG MLMS could collect the depth-discrete groundwater observations from a fully penetrated 2-inch well. Three field campaigns were conducted to validate the capability of the FBG MLMS for HT surveys. The results show that the accuracy and stability of this MLMS are reliable and that FBG MLMS is beneficial for conducting an HT survey. Specifically, compared to the traditional monitoring well in an injection event, this FBG MLMS can concurrently cause an increase in the number of cross-hole tests several times and collect many more head observations than the standard methods, resulting in the observed flow fields efficiently reaching ergodic conditions and effectively improving the accuracy of the estimated hydraulic heterogeneity. Therefore, the FBG MLMS could be an alternative MLMS for efficiently and economically conducting an HT survey.     

Semi‐active tuned mass damper building systems: Application

Seismic performance attributes of multi‐story passive and semi‐active tuned mass damper (PTMD and SATMD) building systems are investigated for 12‐story moment resisting frames modeled as ‘10+2’ stories and ‘8+4’ stories. Segmented upper portion of the stories are isolated as a tuned mass, and a passive viscous damper or semi‐active resetable device is adopted as energy dissipation strategy. The semi‐active approach uses feedback control to alter or manipulate the reaction forces, effectively re‐tuning the system depending on the structural response. Optimum tuned mass damper control parameters and appropriate matching SATMD configurations are adopted from a companion study on a simplified two‐degree‐of‐freedom system. Statistical performance metrics are presented for 30 probabilistically scaled earthquake records from the SAC project. Time history analyses are used to compute response reduction factors across a wide range of seismic hazard intensities. Results show that large SATMD systems can effectively manage seismic response for multi‐degree‐of freedom systems across a broad range of ground motions in comparison to passive solutions. Specific results include the identification of differences in the mechanisms by which SATMD and PTMD systems remove energy, based on the differences in the devices used. Additionally, variability is seen to be tighter for the SATMD systems across the suites of ground motions used, indicating a more robust control system. While the overall efficacy of the concept is shown the major issues, such as isolation layer displacement, are discussed in detail not available in simplified spectral analyses, providing further insight into the dynamics of these issues for these systems. Copyright © 2009 John Wiley & Sons, Ltd.     

A 60-year record of rainfall from the sediments of Jinheung Pond,Jeongeup, Korea

This paper describes mean grain-size data from the ¹³⁷Cs- and ²¹⁰Pb-dated sediment core BS-3 (33-cm long) recovered from Jinheung Pond, located in the southwestern part of the Korean Peninsula. Grain-size analysis of the Jinheung Pond sediments shows a clear signal for changes in annual precipitation over the past 60 years. Instrumental records of annual precipitation (AP) and the annual summation of the precipitation of >50 mm per day (AP50), which reflects the energy available for sediment transport, correlate well with the mean grain-size distributions measured in the core. The most plausible mechanism for this response in mean grain size is variations in the annual amount and intensity of precipitation. Heavy precipitation enhances soil erosion over the catchment area and increases the transport capacity of streams and rivers. Thus, coarser mean grain size should reflect higher precipitation, and smaller mean grain size should reflect lower rainfall. In the data from core BS-3, however, grain-size peaks attributed to increased annual precipitation are not prominent. This is because a dam prevents removal of fine particles from the pond via the outflow. Therefore, the mean grain-size value represents somewhat larger sediments together with fine clays. The results of this study show that sediments of dammed lakes and ponds are well suited for high-resolution environmental investigations, especially for records of changes in precipitation over time.     

Comparison of radiocarbon and OSL dating methods for a Late Quaternary sediment core from Lake Ulaan,Mongolia

Both radiocarbon and optically stimulated luminescence (OSL) dating methods were applied to test their suitability for establishing a chronology of arid-zone lacustrine sediments using a 5.88-m-long core drilled from Lake Ulaan, southern Mongolia. Although the radiocarbon and OSL ages agree in some samples, the radiocarbon ages are older than the corresponding OSL ages at the 550-cm depth horizon (late Pleistocene) and in the 100–300-cm interval (early to late Holocene). In the early to late Holocene, radiocarbon ages are consistently older than OSL ages by 4,100–5,800 years, and in the late Pleistocene by 2,700–3,000 years. Grain-size analysis of early to late Holocene sediments and one late Pleistocene sediment sample (550-cm depth) indicates that eolian processes were the dominant sediment-transport mechanism. Also, two late Pleistocene sediments samples (from 400- to 500-cm depths) are interpreted to have been deposited by both eolian and glaciofluvial processes. Accordingly, the radiocarbon ages that were older than the corresponding OSL ages during the Holocene seem to have been a consequence of the influx of ¹⁴C-deficient carbon delivered from adjacent soils and Paleozoic carbonate rocks by the westerly winds, a process that is also active today. In addition to the input of old reworked carbon by eolian processes, the late Pleistocene sediments were also influenced by old carbon delivered by deglacial meltwater. The results of this study suggest that when eolian sediment transport is suspected, especially in lakes of arid environments, the OSL dating method is superior to the radiocarbon dating method, as it eliminates a common ‘old-carbon’ error problem.     

Seismic isolation for low‐to‐medium‐rise buildings using granulated rubber–soil mixtures: numerical study

This paper presents the preliminary research works on a potential seismic isolation method that makes use of scrap rubber tires for the protection of low‐to‐medium‐rise buildings. The method involves mixing shredded rubber tire particles with soil materials and placing the mixtures around building foundations, which provides a function similar to that of a cushion. Meanwhile, the stockpiling of scrap tires is a significant threat to our environment, and the engineering community has been looking for long‐term viable solutions to the recycling and reuse of rubber. A finite element program has been developed for modeling the time‐domain dynamic responses of soil–foundation–structure system, by which the effectiveness and robustness of the proposed method have been evaluated. In general, the structural responses, in terms of acceleration and inter‐story drift, can be reduced by 40–60%. Copyright © 2012 John Wiley & Sons, Ltd.     

Seismic isolation by rubber–soil mixtures for developing countries

This paper proposes a promising seismic isolation method particularly suitable for developing countries, which makes use of rubber–soil mixtures. Apart from reducing the level of shaking in the horizontal direction, the distinctive advantage of the proposed method is that it can also significantly reduce the shaking level of vertical ground motion, to which an increasing attention has been paid in the earthquake engineering community. On the other hand, the use of scrap tires as the rubber material can provide an alternative way to consume the huge stockpile of scrap tires all over the world. Moreover, the low cost of this proposed seismic protection scheme can greatly benefit those developing countries where resources and technology are not adequate for earthquake mitigation with well‐developed, yet expensive, techniques. The proposed method has been demonstrated through a series of numerical simulations and a parametric study has also been carried out. Lastly, five important issues regarding the concept and feasibility have been discussed. Copyright © 2007 John Wiley & Sons, Ltd.