Storage-efficient reconstruction framework for planar contours

A storage-efficient reconstruction framework for cartographic planar contours is developed. With a smaller number of control points, we aim to calculate the area and perimeter as well as to reconstruct a smooth curve. The input data forms an oriented contour, each control point of which consists of three values: the Cartesian coordinates (x, y) and tangent angle θ. Two types of interpolation methods are developed, one of which is based on an arc spline while the other one is on a cubic Hermite spline. The arc spline-based method reconstructs a G¹ continuous curve, with which the exact area and perimeter can be calculated. The benefit of using the Hermite spline-based method is that it can achieve G² continuity on most control points and can obtain the exact area, whereas the resulting perimeter is approximate. In a numerical experiment for analytically defined curves, more accurate computation of the area and perimeter was achieved with a smaller number of control points. In another experiment using a digital elevation model data, the reconstructed contours were smoother than those by a conventional method.     

Preferential dissolution of SiO<Subscript>2</Subscript> from enstatite to H<Subscript>2</Subscript> fluid under high pressure and temperature

Stability and phase relations of coexisting enstatite and H₂ fluid were investigated in the pressure and temperature regions of 3.1–13.9 GPa and 1500–2000 K using laser-heated diamond-anvil cells. XRD measurements showed decomposition of enstatite upon heating to form forsterite, periclase, and coesite/stishovite. In the recovered samples, SiO₂ grains were found at the margin of the heating hot spot, suggesting that the SiO₂ component dissolved in the H₂ fluid during heating, then precipitated when its solubility decreased with decreasing temperature. Raman and infrared spectra of the coexisting fluid phase revealed that SiH₄ and H₂O molecules formed through the reaction between dissolved SiO₂ and H₂. In contrast, forsterite and periclase crystals were found within the hot spot, which were assumed to have replaced the initial orthoenstatite crystals without dissolution. Preferential dissolution of SiO₂ components of enstatite in H₂ fluid, as well as that observed in the forsterite H₂ system and the quartz H₂ system, implies that H₂-rich fluid enhances Mg/Si fractionation between the fluid and solid phases of mantle minerals.     

Landslide Hazard and Risk Assessment on the Northern Slope of Mt. Changbai, China

Landslide hazard and risk assessment on the northern slope of Mt. Changbai, a well-known tourist attraction near the North Korean-Chinese border, are assessed. This study is divided into two parts, namely, landslide hazard zonation and risk assessment. The 1992 Anbalagan and Singh method of landslide hazard zonation （LHZ） was modified and used in this area. In this way, an Associative Analysis Method was used in representative areas to get a measure for controlling factors （slope gradient, relative relief, vegetation, geology, discontinuity development, weak layer thickness and ground water）. For the membership degree of factor to slope failure, the middle range of limited values was used to calculate LHZ. Based on an estimation of the potential damage from slope failure, a reasonable risk assessment map was obtained using the relationship of potential damage and probable hazard to aid future planning and prediction and to avert loss of life.     

Impacts of nutrient management and decrease in paddy field area on groundwater nitrate concentration: a case study at the Nasunogahara alluvial fan,Tochigi Prefecture,Japan

In order to help evaluate the trends in the NO₃-N concentration in groundwater with a view to preventing further degradation in water quality in the future, a distributed groundwater quality model was constructed for the Nasunogahara basin. The best fit for the groundwater table elevations by the flow component of the model was achieved with average mean absolute errors (MAEs) of 0·92 m for the calibration period and 0·83 m for the validation period. Moreover, the best fit for the NO₃-N concentration by the water quality component was achieved with average mean relative errors (MREs) of 29·8% for the calibration period and 30·3% for the validation period. After developing a robust model, various change scenarios were tested; specifically, the effects of effluent load control and a decrease in paddy field area on the NO₃-N concentration in groundwater were predicted. The most intensively farmed area contributed about 40% of the total effluent load because of livestock farming in the basin. When the effluent load from this area was decreased by 50%, the average NO₃-N concentrations at sites S1, S2 and S3 were reduced by about 15%; however, the average concentrations at S4 and S5 were reduced by only 1%. Furthermore, when the total effluent load from the concentrated livestock area was removed completely, the average groundwater NO₃-N concentrations at S1, S2 and S3 were reduced by about 30% as compared with the original calculated results. In contrast, decreasing the area of the paddy fields in the basin did not greatly influence the groundwater NO₃-N concentration. In the case of a 70% reduction in paddy field area, average NO₃-N concentrations increased by about 7% at S1, S2 and S3. Copyright © 2008 John Wiley & Sons, Ltd.     

Soil pore characteristics of evergreen and deciduous forests of the tropical monsoon region in Cambodia

Both evergreen and deciduous forests (Efs and Dfs) are widely distributed under similar climatic conditions in tropical monsoon regions. To clarify the hydraulic properties of the soil matrix in different forest types and their effects on soil water storage capacity, the soil pore characteristics (SPC) were investigated in Ef and Df stands in three provinces in Cambodia. Soils in the Ef group were characterized in common by large amounts of coarse pores with moderate pore size distribution and the absence of an extremely low K_s at shallow depths, compared to Df group soils. The mean available water capacity of the soil matrix (AWC_sm) for all horizons of the Ef and Df group soils was 0·107 and 0·146 m³ m^?3, respectively. The mean coarse pore volume of the soil matrix (CPV_sm) in the Ef and Df groups was 0·231 and 0·115 m³ m^?3, respectively. A water flow simulation using a lognormal distribution model for rain events in the early dry season indicated that variation in SPC resulted in a larger increase in available soil water in Ef soils than in Df soils. Further study on deeper soil layers in Ef and each soil type in Df is necessary for the deeper understanding of the environmental conditions and the hydrological modelling of each forest ecosystem. Copyright © 2010 John Wiley & Sons, Ltd.