Separation and sliding between soil and structure during strong ground motion

This paper presents an approach to the problem of separation and sliding between soil and structure in the finite element analysis of dynamic soil-structure interaction problems. Joint elements are arranged along the contact surface between soil and structure and they have a property such that tensile forces are not transmitted between the planes representing structure and soil in the finite element analysis. The dynamic properties governing the sliding are determined by the Mohr-Coulomb failure law determined from the cohesion and the friction angle between soil and structure. The proposed method is applied to (i) a model of a reactor building resting on the free surface of layered ground and (ii) a buried foundation structure. The numerical computations reveal the following results: that the translation is dominant in the motion of the structure when sliding is taking place between soil and structure, and that the rocking is dominant in the rest of the response. The amplitude of the response during sliding is increased on any one point of the structure and decreased on any one point of the ground compared with that of the fixed condition at the interface. In the case of the buried structure, it is observed in the computed results that the structure and soil move in the opposite direction along the vertical contact surface and are separated from each other in the near surface region during the strong phase of the excitation.     

Determination of U–Pb Ages for Young Zircons using Laser Ablation‐ICP‐Mass Spectrometry Coupled with an Ion Detection Attenuator Device

We have developed new analytical procedures to measure precise and accurate ²³⁸U–²⁰⁶Pb and ²³⁵U–²⁰⁷Pb ages for young (~ 1 Ma) zircons using laser ablation‐ICP‐mass spectrometry. For young zircons, both careful correction for the background counts and analysis of very small Pb/U ratios (i.e., ²⁰⁶Pb/²³⁸U < 0.00016 and ²⁰⁷Pb/²³⁵U < 0.0001 for 1 Ma zircons) are highly desired. For the correction of the background, the contribution of the background signal intensities for the analytes, especially for the residual signal intensities for ²⁰⁶Pb and ²⁰⁷Pb, was defined through laser ablation of synthesised zircons (ablation blank) containing negligible Pb. The measured signal intensities for ²⁰²Hg, ²⁰⁶Pb and ²⁰⁷Pb signals obtained by the ablation blank were slightly higher than those obtained by data acquisition without laser ablation (gas blank). For the wider dynamic range measurements on Pb/U ratios, an attenuator device for the ion detection system was employed to extend the capability to monitor high‐intensity signals (i.e., > 3 Mcps). Through the attenuator device, the ion currents were reduced to 1/450 of the signal intensity without the attenuator. Because the switching time for the attenuator was shorter than 1 ms, signal intensities for only specific isotopes could be reduced. With attenuation of the ²³⁸U signal, counting statistics on ²⁰⁶Pb and ²⁰⁷Pb isotopes could be improved and counting loss on the ²³⁸U signal could be minimised. To demonstrate the reliability of this new analytical technique, ²³⁸U–²⁰⁶Pb and ²³⁵U–²⁰⁷Pb ages for three young zircon samples (collected from Osaka Group Pink Volcanic Ash, Kirigamine and Bishop Tuff) were measured. The data presented here demonstrate clearly that the present technique could become a major analytical tool for in situ U–Pb age determination of young zircons (~ 1 Ma).     

Comparison of carbon cycle between the western Pacific subarctic and subtropical time-series stations: highlights of the K2S1 project

A comparative study of ecosystems and biogeochemistry at time-series stations in the subarctic gyre (K2) and subtropical region (S1) of the western North Pacific Ocean (K2S1 project) was conducted between 2010 and 2013 to collect essential data about the ecosystem and biological pump in each area and to provide a baseline of information for predicting changes in biologically mediated material cycles in the future. From seasonal chemical and biological observations, general oceanographic settings were verified and annual carbon budgets at both stations were determined. Annual mean of phytoplankton biomass and primary productivity at the oligotrophic station S1 were comparable to that at the eutrophic station K2. Based on chemical/physical observations and numerical simulations, the likely “missing nutrient source” was suggested to include regeneration, meso-scale eddy driven upwelling, meteorological events, and eolian inputs in addition to winter vertical mixing. Time-series observation of carbonate chemistry revealed that ocean acidification (OA) was ongoing at both stations, and that the rate of OA was faster at S1 than at K2 although OA at K2 is more critical for calcifying organisms.     

Phytoplankton community structure in Otsuchi Bay,northeastern Japan,after the 2011 off the Pacific coast of Tohoku Earthquake and tsunami

The tsunami caused by the 2011 off the Pacific coast of Tohoku Earthquake seriously damaged the Pacific coast of northeastern Japan. In addition to its direct disturbance, a tsunami can indirectly affect coastal pelagic ecosystems via topographical and environmental changes. We investigated seasonal changes in the phytoplankton community structure in Otsuchi Bay, northeastern Japan, from May 2011, which was 2 months after the tsunami, to May 2013. The phytoplankton species composition in May 2011 was similar to that observed in May 2012 and 2013. The present results are consistent with the dominant species and water-mass indicator species of phytoplankton in past records. These results suggest that there was no serious effect of the tsunami on the phytoplankton community in Otsuchi Bay. Community analysis revealed that two distinct seasonal communities appeared in each year of the study period. The spring–summer community was characterized by warm-water Chaetoceros species, and dinoflagellates appeared from May to September. The fall–winter community was characterized by cold neritic diatoms, which appeared from November to March. The succession from the spring–summer community to the fall–winter community took place within a particular water mass, and the fall–winter community appeared in both the surface water and the Oyashio water mass, suggesting that water-mass exchange is not the only factor that determines the phytoplankton community structure in Otsuchi Bay.     

Magnetic detection of heated soils at paleolithic sites in Japan

We present a methodological approach to detect heated soil on ancient sites, using magnetic measurements. The method is based on changes in magnetic signals of soil by heating. The following three types of soil were used for testing the method: silty soil (SS), weathered volcanic ash (WVA, = loam) and fairly fresh volcanic ash (VA) called Odori tephra. On heating above 250–600°C, the magnetic susceptibility and remanent magnetization intensity increased for the SS and WVA samples, reflecting chemical alteration of magnetic minerals (from goethites to magnetites through hematites). The VA sample showed no susceptibility change suggesting the absence of goethites within it. On heating below 250°C, only the intensities of all the samples increased. This is possibly due to acquisition of thermal remanent magnetization. The largest change of the magnetic signals was identified for the SS sample and the smallest one was seen for the VA sample. Therefore, the in situ susceptibility measurement, which is the nondestructive and indirect method, seems to be effective to detect heated soil for sites of aqueous deposits as the SS. On the other hand, for sites of aeolian deposits as the WVA (loam) and VA, the intensity measurement of collected soils seems to be the most reliable method to detect evidence of heating. The degree of the magnetic stability (coercivity) against progressive alternating-field demagnetization was also an important parameter, indicating whether the investigated soils were heated or unheated. © 1999 John Wiley & Sons, Inc.