Extreme temperature scenarios in Mexicali,Mexico under climate change conditions

Extreme weather events can have severe consequences for the population and the environment. Therefore, in this study a temporal trend of annual temperatures was built with a time series from 1950 to 2010 for Mexicali, Mexico, and estimates of 5- to 100-year return periods are provided by modeling of summer maximum and winter minimum temperatures. A non-parametric Kendall’s tau test and the Sen’s slope estimator were used to compute trends. The generalized extreme value (GEV) distribution was applied to the approximation of block maxima and the generalized Pareto distribution (GPD) to values over a predetermined threshold. Due to the non-stationary characteristic of the series of temperature values, the temporal trend was included as a covariable in the location parameter and substantial improvements were observed, particularly with the extreme minimum temperature, compared to that obtained with the GEV with no covariable and with the GPD. A positive and significant statistically trend in both summer maximum temperature and winter minimum temperature was found. By the end of 21st century the extreme maximum temperature could be 2 to 3 °C higher than current, and the winter could be less severe, as the probabilistic model suggests increases of 7 to 9 °C in the extreme minimum temperature with respect to the base period. The foreseeable consequences on Mexicali city are discussed.     

Characteristics of tropical cyclones making landfall on the Pacific coast of Mexico: 1970-2010

This study evaluates impacts from tropical cyclone (TC) landfalls on populated areas located along the Pacific Ocean coast of Mexico. The period of interest is from 1970 through 2010 and an international disaster database is used to identify the impact from the landfalling TCs. More than 30 landfall events occurred during the period; we examined the top 25 TCs based on rainfall accumulation, as well as the top 10 TC-related disasters based on the affected population. Each event resulted in affected population from 20 000 to more than 800 000. Strong winds and heavy rainfall, during periods of one to three days, are associated with property damage and loss of lives. Our results indicate that excessive rainfall accumulations and daily rates, over highly populated areas, are important elements associated with the occurrence of disasters. Six of the top 10 TC-related disasters occurred during El Niño and three during neutral conditions; however, looking at the top 25 events, 10 occurred during El Niño and 10 during neutral conditions. Three case studies that occurred during El Niño events (Liza in 1976, Pauline in 1997, and Lane in 2006) are documented in more detail as they affected areas with different population densities in the southern and northwestern coasts of Mexico.     

Clay mineralogy as a tool for integrated sequence stratigraphic and palaeogeographic reconstructions: Late Oligocene–Early Aquitanian western internal South Iberian Margin,Spain

The different hydrodynamic behaviour of detrital clay minerals in the marine depositional environment allows assessment of relative sea‐level variations in the sedimentary record. Comparison of smectite and kaolinite:illite (S+K:I) changes with the global sea‐level curves and with the third‐order cycles of the eustatic curve for European basins allows assessment of the influence of global eustasy and local tectonics on sequence stratigraphy. In the South Iberian Margin, sedimentation took place both on open‐marine platforms and in deeper water areas. On this margin during the Late Oligocene to Early Aquitanian, the variations in sedimentation were caused not only by global eustasy but also by compressive tectonics. Correlations were made between the S+K:I cycles and the third‐order cycles for European basins, enabling the definition of four third‐order sedimentary sequences (here called C1, C2, C3, and A1) and two lower‐order sequences within C3 and A1 (here called C3a, C3b, A1a, and A1b) related to tectonic movements. High S+K:I values were observed during episodes of maximum flooding in each sequence and lower‐order sequence and in each succession, enabling changes in palaeocoastal morphology to be considered. Copyright © 2012 John Wiley & Sons, Ltd.     

Chemical fluid transport (CFT): A window into Earth and its development

Gas phase transport according to chemical fluid transport (CFT) in Earth's crust as well as in the solar nebula is characterized by very high transport efficiency. Systematic investigations of mobilization, transport and deposition of gaseous MeX (Me = metal, X = F or Cl) compounds by solid gas equilibrium reactions are suitable to explain numerous extensive accumulations of minerals and ores. More than 40 of the considered chemical elements form volatile MeX compounds. Some elements tend to form MeF compounds, whereas others are more likely to form MeCl compounds. Silicon reacts with HF to form SiF₄ and replaces other elements to form MeF compounds at low temperature ranges. Accumulations caused by SiF₄ transport explain the formation of numerous quartz varieties and silicate minerals in Earth's crust. Iron most likely reacts with HCl to form FeCl₂ as well as FeCl₃ and explain the formation of iron or iron compounds. Thermodynamically directed transport from cool to hot areas in connection with cyclic processes increases the transport efficiency of MeX-species. Such species are SiF₄, Al₂F₆, POF₃, Cu₃Cl₃, SnCl₄, BF₃, GeF₄, GeCl₄, Ga₂Cl₆, ZrF₄, NbF₅ and TiF₄. The transport gases SiF₄ and POF₃ often react with environmental compounds forming pneumatolytic and metasomatical mineral accumulations. CFT is the “motor” of pneumatolytic and metasomatical processes.     

The age and composition of the pre-Cenozoic basement of the Jalisco Block: implications for and relation to the Guerrero composite terrane

The Jalisco Block is thought to be part of the Guerrero terrane, but the nature and age of the underlying crystalline basement are largely unknown. We have collected a suite of schists, granitoids, and weakly metamorphosed marine sediments from various parts of the Jalisco Block including Atenguillo and Ameca, Mascota and San Sebastián, Cuale, Puerto Vallarta, Punta Mita, Yelapa, and Tomatlán. The schists range in age from 135 to 161 Ma, with many exhibiting Proterozoic and Phanerozoic zircon ages. The granitoids range in age from 65 to 90 Ma, and are calc-alkaline compositionally—similar to granitoids from the Puerto Vallarta and Los Cabos batholiths. The Jalisco granitoids also experienced similar uplift rates to granitoids from the regions to the north and south of the Jalisco Block. The marine sediments yield a maximum depositional age of 131 Ma, and also contain a significant zircon population with ages extending back to the Archean. Granitoids from this study define two age groups, even after the effects of thermal resetting and different closure temperatures are considered. The 66.8-Ma silicic ash flow tuff near Union de Tula significantly expands the extent of this Cretaceous–Paleocene age ash flow tuff unit within the Jalisco Block, and we propose calling the unit “Carmichael silicic ash flow tuff volcanic succession” in honor of Ian Carmichael. The ages of the basement schists in the Jalisco Block fully overlap with the ages of terranes of continental Mexico, and other parts of the Guerrero terrane in the south, confirming the autochthonous origin of the Jalisco Block rather than exotic arc or allochthonous origin. Geologic data, in combination with geochronologic and oxygen isotopic data, suggest the evolution of SW Mexico with an early 200–1,200-Ma passive margin, followed by steep subduction in a continental arc setting at 160–165 Ma, then shallower subduction by 135 Ma, and finally, emplacement of granitoids at 65–90 Ma.     

Mississippian coral assemblages from the Khenifra area,Central Morocco: Biostratigraphy,biofacies, palaeoecology and palaeobiogeography

Analysis of Mississippian coral assemblages from the Khenifra region of Central Morocco together with data from foraminiferal/algal microfossils has established new age dating of 5 localities within the Azrou–Khenifra Basin: Souk El Had and Sidi Lamine, where corals occur mainly in biostromes protected by oolitic shoals, Tabainout, where corals have been recorded in different environments related to microbial mounds, Alhajra Almatkouba, where corals occur in biostromal reworked beds and Tiouinine, where corals occur in a well structured, fringing reef. This study demonstrates the presence of richer more diverse coral assemblages than previously recorded, in a variety of environmental settings. These coral assemblages strengthen correlations with the Adarouch area in the NE part of the Azrou–Khenifra Basin. It is emphasised that in the upper Viséan there are close similarities with rugose coral assemblages in other parts of the Western Palaeotethys including North Africa, SW Spain and NW Europe, and that all belong to the same biogeographic province.     

Isotope geochemistry of Paleoproterozoic metacarbonates from Itatuba,Borborema Province,Northeastern Brazil: Evidence of marble melting within a collisional suture

Strongly-deformed marbles may be easily confused with linear and elongated carbonatite intrusions. Both rocks may present similar texture and foliation to the host rock, or even cross cutting field relationships, which could be interpreted either as igneous or high-grade metamorphosed marble. Diagnostic criteria are even more complex when there is evidence of melting of the metasedimentary carbonate rock, such as has been described in the Himalayas and in the Eastern Ghats, India.In the Alto Moxotó Terrane, a high-grade gneissic domain of the Borborema Province, Northeastern Brazil, there are metacarbonates associated with banded gneisses and different metaplutonic rocks. Field evidence indicates the absence of other metasedimentary rocks associated with these marbles, thus suggesting that these carbonates were separated from other siliciclastic metasedimentary rocks. The presence of marble also suggests that it may represent the initial stage of a crustal carbon recycling into the mantle. These marbles present many field similarities to carbonatites (e.g., fluid-flow structure) and, together with metagranites and metamafic intrusions, may represent a major collisional tectonic suture.A detailed study of the carbon, oxygen and strontium isotopic composition of these marbles is presented. This study aims to identify the origin of the different isotopic components. It is argued that these rocks were subjected to temperature and pressure conditions that were sufficiently high to have melted them. The isotopic data presented here support this interpretation and indicate the mixing of two components: (i) one characterized by radiogenic Sr isotopes and mantle-like carbon isotopes, which is associated with the gneissic and mafic rocks, and (ii) another characterized by low ⁸⁷Sr/⁸⁶Sr ratios and highly positive δ¹³C values. Available geochemical data for the upper Paleoproterozoic indicate that the ⁸⁷Sr/⁸⁶Sr ratio of ocean water, varying between 0.7050 (2.25 ± 0.25 Ga) and 0.7047 (1.91 Ga), falls within the lower range of the samples from Itatuba and thus reinforces the interpretation that these marbles are sedimentary-derived and were partially contaminated by interaction with the host gneissic and mafic rocks.     

Provenance analysis of the Paleozoic sequences of the northern Gondwana margin in NW Iberia: Passive margin to Variscan collision and orocline development

The Cantabrian Zone of NW Iberia preserves a voluminous, almost continuous, sedimentary sequence that ranges from Neoproterozoic to Early Permian in age. Its tectonic setting is controversial and recent hypotheses include (i) passive margin deposition along the northern margin of Gondwana or (ii) an active continental margin or (iii) a drifting ribbon continent. In this paper we present detrital zircon U–Pb laser ablation age data from 13 samples taken in detrital rocks from the Cantabrian Zone sequence ranging from Early Silurian to Early Permian in depositional age. The obtained results, together with previously published detrital zircon ages from Ediacaran–Ordovician strata, allow a comprehensive analysis of changing provenance through time. Collectively, these data indicate that this portion of Iberia was part of the passive margin of Gondwana at least from Ordovician to Late Devonian times. Zircon populations in all samples show strong similarities with the Sahara Craton and with zircons found in Libya, suggesting that NW Iberia occupied a paleoposition close to those regions of present-day northern Africa during this time interval. Changes in provenance in the Late Devonian are attributed to the onset of the collision between Gondwana and Laurussia.Additionally, the Middle Carboniferous to Permian samples record populations consistent with the recycling of older sedimentary sequences and exhumation of the igneous rocks formed before and during the Variscan orogeny. Late-Devonian to Permian samples yield zircon populations that reflect topographic changes produced during the Variscan orogeny and development of the lithospheric scale oroclinal buckling.     

Hydrographic data modeling methods for determining precise seafloor topography

Acoustic and light detection and ranging are the recent methods used in hydrographical surveying. Depth values depending on X and Y horizontal coordinates are measured in both methods. While processing the hydrographical data, all data with different density are interpolated and modeled for determining the seafloor model using different interpolation techniques. In this study, effects of different surface modeling methods are investigated. Data obtained from single-beam echo sounder (SBES) are modeled using inverse distance, kriging, local polynomial, minimum curvature, moving average, nearest-neighbor, and Delaunay interpolation methods. Interpolation results are compared with the multibeam echo sounder data which were collected on the same area for determining the accuracy of modeling methods. Depending on the maximum total vertical uncertainty values in hydrographic survey standards, the best results were determined by using the kriging method. The Delaunay, minimum curvature, and inverse distance methods can be used for modeling the SBES data in shallow waters.     

Hydrogeological research on intensively exploited deep aquifers in the ‘Loma de Úbeda’ area (Jaén, southern Spain)

The intensive use of groundwater for irrigation in the area of Úbeda (‘Loma de Úbeda’, Jaén, southern Spain) has transformed an area of traditionally rain-fed dry farmland into fields with some of the highest olive oil productivity in the world. Early hydrogeological research studies, initiated just after the beginning of the groundwater exploitation, revealed that the water was collected from three different overlapping aquifers occupying an area of over 1,100 km², with the lower aquifers located at depths from 300 to over 700 m in an area of 440 km². Multidisciplinary research, based on geological characterization, and piezometric, hydrochemical and isotopic data, has led to a conceptual model of functioning in this complex hydrogeological system. The proposed model allows for the identification of the recharge areas, and the discharge, which is at present mainly associated with the groundwater pumping. Areas of mixing of waters from the different aquifers and the main hydrogeochemical processes affecting groundwater quality are described.