Storm-induced turbidity currents on a sediment-starved shelf: Insight from direct monitoring and repeat seabed mapping of upslope migrating bedforms

The monitoring of turbidity currents enables accurate internal structure and timing of these flows to be understood. Without monitoring, triggers of turbidity currents often remain hypothetical and are inferred from sedimentary structures of deposits and their age. In this study, the bottom currents within 20 m of the seabed in one of the Pointe-des-Monts (Gulf of St. Lawrence, eastern Canada) submarine canyons were monitored for two consecutive years using Acoustic Doppler Current Profilers. In addition, multibeam bathymetric surveys were carried out during deployment of the Acoustic Doppler Current Profilers and recovery operations. These new surveys, along with previous multibeam surveys carried out over the last decade, revealed that crescentic bedforms have migrated upslope by about 20 to 40 m since 2007, despite the limited supply of sediment on the shelf or river inflow in the region. During the winter of 2017, two turbidity currents with velocities reaching 0·5 m sec⁻¹ and 2·0 m sec⁻¹, respectively, were recorded and were responsible for the rapid (<1 min) upstream migration of crescentic bedforms measured between the autumn surveys of 2016 and 2017. The 200 kg (in water) mooring was also displaced 10 m down-canyon, up the stoss side of a bedform, suggesting that a dense basal layer could be driving the flow during the first minute of the event. Two other weaker turbidity currents with speeds <0·5 m sec⁻¹ occurred, but did not lead to any significant change on the seabed. These four turbidity currents coincided with strong and sustained wind speed >60 km h⁻¹ and higher than normal wave heights. Repeat seabed mapping suggests that the turbidity currents cannot be attributed to a canyon-wall slope failure. Rather, sustained windstorms triggered turbidity currents either by remobilizing limited volumes of sediment on the shelf or by resuspending sediment in the canyon head. Turbidity currents can thus be triggered when the sediment volume available is limited, likely by eroding and incorporating canyon thalweg sediment in the flow, thereby igniting the flow. This process appears to be particularly important for the generation of turbidity currents capable of eroding the lee side of upslope migrating bedforms in sediment-starved environments and might have wider implications for the activity of submarine canyons worldwide. In addition, this study suggests that a large external trigger (in this case storms) is required to initiate turbidity currents in sediment-starved environments, which contrasts with supply-dominated environments where turbidity currents are sometimes recorded without a clear triggering mechanism.     

Low frequency edge waves over a trench-ridge topography adjoining a straight coastline

Abstract

The possible interaction of trapped midoceanic boundary waves with a nearby coastline is examined by considering a step trench-ridge topography adjoining a semi-infinite straight coastline. The full dispersion equation, including the effect of the earth's rotation, is derived for long waves over this topography. It is shown that the presence of the coastline begins to have a significant effect on the behaviour of quasigeostrophic ridge waves whenever the wave length is greater than three times the ridge coastline separation.

As an example, the dispersion curves are presented for the topography of the Heceta Bank off the coast of Oregon and it is conjectured that the presence of this off-shore ridge may provide an explanation for the anomalous direction of propagation of the 0.1 c.p.d. shelf wave reported by Mooers and Smith (1968).     

Anthropogenic influence of trace metals in sediments of the Al-Qilt catchment,West Bank,Palestine: 1. Contamination factor and bonding forms

Al-Qilt catchment, located east of both the Ramallah and Jerusalem districts is strongly influenced by waste waters discharged from Israeli settlements and Palestinian urban centers. In this research, our aim was to verify the chemical status of the surface sediments from the Al-Qilt catchment during 2008/2009. For this purpose, 36 surface sediment samples were collected and analyzed with ICP/MS within the fraction of below 63 μm. The extent of contamination of trace metals from Al-Qilt sediments sites were measured by evaluating the contamination factors (CF) from digestion by aqua regia and additionally by sequential extraction steps using the BCR-method. On the basis of the calculated CF, sediments appear particularly contaminated with Zn, Cu, Ag, Sn, Cd, Hg, Bi, and B. Three regions, Wadi Sweanit, Ras Al-Qilt, and Qalandiah have been identified as critical points of contamination. Trace metal inputs to the Al-Qilt catchment need to be kept under strict control in the future since Ras Al-Qilt is considered as one of the important springs in the area and is used for domestic purposes. Moreover, it will be susceptible to pollution if no action is taken to decrease the pollution at the upstream of Al-Qilt.     

Investigation of NaCl deliquescence in porous substrates using RH-XRD

We report on the use of X-ray diffractometry under controlled conditions of temperature and relative humidity (RH-XRD) for the investigation of NaCl deliquescence in the pore space of glass filter frits, which were used as model substrates. The study confirms that RH-XRD is an appropriate experimental technique for the in situ observation of phase transformation in porous materials. It is used for an investigation of both the deliquescence kinetics and the deliquescence humidity within pores of different median pore diameter. Several major influences affecting deliquescence rates in the pore space close to the surface of a porous material are discussed. It appears that quite short-term variation of ambient relative humidity, e.g., typical daily fluctuations, might induce damaging deliquescence–crystallization cycles within the pore space of building materials. In agreement with theoretical considerations it was found that confinement of NaCl crystals in pores with median diameters in the range 1.4–70 μm does not affect the deliquescence humidity of the salt.     

Ca II resonance lines in non-homogeneous chromospheres

Profiles of the K line of Caii are computed for a two component solar chromosphere, chosen to simulate with a simple geometry the chromospheric supergranular network. Each component rises above the BCA photosphere, the boundary component representing the bright network with a sharp temperature rise and the cell component representing the darker region with an extended temperature minimum. Theoretical intensity profiles of the Can K core, calculated as weighted averages over the projected areas of the components, are produced for = 0.6 and 0.3. The line source function and the optical depth are obtained from a self-consistent treatment of the steady state and radiative transfer equations, with complete redistribution assumed for scattering in the line. The atomic model consists of two bound levels and a continuum. It is found that a 4600 K minimum can lead to the successful theoretical prediction of the observed limb darkening and 4300 K radiation temperature of the K1 feature only when very large values of turbulent velocity are assumed to exist in the cell region.Publications of the Goethe Link Observatory, Indiana University, No. 95.     

Dynamic Study on Fracture Problems in Viscoelastic Sedimentary Rocks Using the Numerical Manifold Method

The viscoelastic deformation behavior of a sedimentary rock under different loading rates is numerically modeled and investigated by the numerical manifold method (NMM). By incorporating a modified 3-element viscoelastic constitutive mode in the NMM, crack initiation and propagation criteria, and crack identification and evolution techniques, the effects of the loading rates on the cracking behavior of a sedimentary rock, such as crack open displacement, crack sliding displacement, crack initiation, crack propagation and final failure mode, are successfully modeled. The numerical results reveal that under a high loading rate (>1,000 MPa/s), due to the viscoelastic property of the sedimentary rock, not only the structural behavior deviates from that of elastic model, but also different cracking processes and final failure modes are obtained.     

Buried paleo-channels on the New Jersey continental margin: channel porosity structures from electromagnetic surveying

We report on a marine electromagnetic (EM) survey across two portions of the New Jersey continental margin that have been previously shown to contain buried paleo-channels. The EM method used provides bulk porosity estimates to depths of around 20 m below the seafloor and is thus able to place porosity constraints on the nature of the channel infill and the contrast in physical properties across the channel boundaries. Our data show that a key condition for the channels to have an electrical signature is that they incise an underlying regional unconformity, R, thought to represent a subaerially eroded surface, exposed during the late Wisconsinan glaciation. Channels that cut R are seen through increases in apparent porosity. Another seismically imaged channel sequence, which lies within the outer-shelf sediment wedge sequence above R, does not have an electrical signature, indicating that the sediments above and below the channel boundaries have similar physical properties.     

Significance of quaternary sea-level fluctuations for delta construction along the Brazilian coast

Many important areas of Quaternary deltaic sedimentation along the Brazilian coast are practically unknown in the geologic literature, especially outside Brazil. Our studies show that these areas, previously considered as highly destructive wave-dominated deltas of Holocene age, were affected by a wave-dominated phase during the Pleistocene, succeeded by highly constructive, intralagoonal stage in the Holocene, in turn followed by wave-dominated deltaic sedimentation that continues until today. The geologic evolution of these coastal plains is exemplified here by the Doce River mouth area, State of Espírito Santo, where relative sea-level fluctuations during the Quaternary played an important role in the construction of the deltaic complex.     

A GIS-Based Tool for Representing Larval Dispersal for Marine Reserve Selection

Increasing efforts to implement marine protected areas (MPAs) as a means of managing marine ecosystems have created a need for evaluating potential spatial management plans. Almost all marine populations are metapopulations, connected reproductively by the dispersal of pelagic larvae. Models of marine population dynamics must account for larval connectivity, but despite recent advances connectivity patterns are still poorly understood. To allow more informed decision making when complete information on dispersal is lacking, we have developed a method based on geographic information systems (GIS) for representing larval dispersal distributions based on bathymetry and typical flows in the coastal ocean. These distributions reflect (1) generally greater flow in directions along, rather than across, lines of constant bathymetry and (2) lesser flow in shallow near-shore waters. We demonstrate how to parameterize this two-dimensional method for depicting larval dispersal based on comparisons to local oceanographic data. We then compare the predictions of the two-dimensional method to those of a simpler one-dimensional alternative in a population model used to evaluate proposed MPAs along the coast of central California. The method produces reasonable larval dispersal patterns and appears to include the effects of bathymetry on population dynamics better than commonly used one-dimensional methods and without requiring the significantly greater investment of developing particle-tracking circulation models. An important advantage of a two-dimensional approach is more realistic portrayal of the dependence of population persistence on the cross-shelf dimension of available habitat.