Stochastic subspace identification for output‐only modal analysis: application to super high‐rise tower under abnormal loading condition

The objective of this paper is to develop an online system parameter estimation technique from the response measurements through using the recursive covariance‐driven stochastic subspace identification (SSI‐COV) approach. In developing the recursive SSI‐COV, to avoid time‐consumption of singular value decomposition in recursive SSI, the extended instrumental variable version of the projection approximation subspace tracking method is used in SSI‐COV. Besides, to reduce the effect of noise on the results of identification, the preprocessing of data using recursive singular spectrum analysis technique is also presented to remove the noise contaminant measurements to enhance the stability of data analysis. On the basis of the proposed method, both the ambient vibration and seismic response data of a tower (Canton Tower) are used to observe the time‐varying system natural frequencies of a tower from its operating condition. Results from using off‐line SSI‐COV method under normal operating condition are also presented. Comparison on the identified time‐varying dynamic characteristics of the tower under normal operating condition and earthquake response of distanced earthquake event is discussed. Copyright © 2012 John Wiley & Sons, Ltd.     

Numerical modeling of toxic nonaqueous phase liquid removal from contaminated groundwater systems: mesh effect and discretization error estimation

Numerical modeling has now become an indispensable tool for investigating the fundamental mechanisms of toxic nonaqueous phase liquid (NAPL) removal from contaminated groundwater systems. Because the domain of a contaminated groundwater system may involve irregular shapes in geometry, it is necessary to use general quadrilateral elements, in which two neighbor sides are no longer perpendicular to each other. This can cause numerical errors on the computational simulation results due to mesh discretization effect. After the dimensionless governing equations of NAPL dissolution problems are briefly described, the propagation theory of the mesh discretization error associated with a NAPL dissolution system is first presented for a rectangular domain and then extended to a trapezoidal domain. This leads to the establishment of the finger‐amplitude growing theory that is associated with both the corner effect that takes place just at the entrance of the flow in a trapezoidal domain and the mesh discretization effect that occurs in the whole NAPL dissolution system of the trapezoidal domain. This theory can be used to make the approximate error estimation of the corresponding computational simulation results. The related theoretical analysis and numerical results have demonstrated the following: (1) both the corner effect and the mesh discretization effect can be quantitatively viewed as a kind of small perturbation, which can grow in unstable NAPL dissolution systems, so that they can have some considerable effects on the computational results of such systems; (2) the proposed finger‐amplitude growing theory associated with the corner effect at the entrance of a trapezoidal domain is useful for correctly explaining why the finger at either the top or bottom boundary grows much faster than that within the interior of the trapezoidal domain; (3) the proposed finger‐amplitude growing theory associated with the mesh discretization error in the NAPL dissolution system of a trapezoidal domain can be used for quantitatively assessing the correctness of computational simulations of NAPL dissolution front instability problems in trapezoidal domains, so that we can ensure that the computational simulation results are controlled by the physics of the NAPL dissolution system, rather than by the numerical artifacts. Copyright © 2014 John Wiley & Sons, Ltd.     

Pre‐Alpine discordant granitic dikes in the metamorphic core of the Betic Cordillera: tectonic implications

Pegmatite dikes bearing andalusite crosscut foliation S₂ in Alpujarride gneisses and schists. Post‐S₂ andalusite is transposed by a foliation S₃, defined by fibrolite, which affects the dikes. The dikes represent highly differentiated granitic magmas with low REE and Zr contents and a positive Eu anomaly. U‐Pb SHRIMP dating of magmatic zircons provided Pan‐African ages (cores) and late Variscan ages (rims). However, U‐rich rims also provided metamorphic Alpine ages, supporting a polyorogenic tectonometamorphic history for pre‐Mesozoic Alpujarride rocks.     

Dissolved nitrous oxide (N2O) dynamics in agricultural field drains and headwater streams in an intensive arable catchment

Indirect nitrous oxide (N₂O) emissions produced by nitrogen (N) leaching into surface water and groundwater bodies are poorly understood in comparison to direct N₂O emissions from soils. In this study, dissolved N₂O concentrations were measured weekly in both lowland headwater streams and subsurface agricultural field drain discharges over a 2‐year period (2013–2015) in an intensive arable catchment, Norfolk, UK. All field drain and stream water samples were found to have dissolved N₂O concentrations higher than the water–air equilibrium concentration, illustrating that all sites were acting as a net source of N₂O emissions to the atmosphere. Soil texture was found to significantly influence field drain N₂O dynamics, with mean concentrations from drains in clay loam soils (5.3 μg N L^?1) being greater than drains in sandy loam soils (4.0 μg N L^?1). Soil texture also impacted upon the relationships between field drain N₂O concentrations and other water quality parameters (pH, flow rate, and nitrate (NO₃) and nitrite (NO₂) concentrations), highlighting possible differences in N₂O production mechanisms in different soil types. Catchment antecedent moisture conditions influenced the storm event mobilisation of N₂O in both field drains and streams, with the greatest concentration increases recorded during precipitation events preceded by prolonged wet conditions. N₂O concentrations also varied seasonally, with the lowest mean concentrations typically occurring during the summer months (JJA). Nitrogen fertiliser application rates and different soil inversion regimes were found to have no effect on dissolved N₂O concentrations, whereas higher N₂O concentrations recorded in field drains under a winter cover crop compared to fallow fields revealed cover crops are an ineffective greenhouse gas emission mitigation strategy. Overall, this study highlights the complex interactions governing the dynamics of dissolved N₂O concentrations in field drains and headwater streams in a lowland intensive agricultural catchment.     

OSL signal resetting in young deposits determined with a pulsed photon‐stimulated luminescence (PPSL) unit

Optical Stimulated Luminescence (OSL) is a technique that can be used for dating geological materials deposited within the last half‐million years, including sediments transported by air, water or gravity, as well as rocks heated at high temperatures. Recently, several studies have shown that OSL can also provide information on sediment transport. The pulsed photon‐stimulated luminescence (PPSL) unit (also known as a portable OSL reader) developed by the Scottish Universities Environmental Research Centre is an instrument designed to read luminescence signals from bulk (untreated) sediment samples comprising poly‐mineral and poly‐grain fractions. In this contribution, we evaluate the potential of the PPSL unit to assess the degree of OSL signal resetting in 27 young deposits (<2 ka) transported by different geomorphic agents in volcanic, coastal and fluvial depositional settings located in Mexico. Our results are in agreement with previous findings that used the Risø TL/OSL reader, confirming that sediments transported by debrisflows contain the highest inherited luminesce signals. Infrared stimulation (IRSL) values in volcanic ash, lavas, and sand beach and dune deposits exhibit low scatter. However, with blue stimulation (BLSL) these samples reveal a large degree of scattering, attributed to charge transfer in the case of the coastal deposits and to the low sensitivity of quartz in the case of volcanic material. The luminescence signals of fluvial sediments exhibit a highly scattered distribution in both IRSL and BLSL. We conclude that the use of a PPSL unit is a simple approach to assess the degree of OSL signal resetting in deposits sourced from different geological environments. This research contributes to previous studies that have investigated new applications of the PPSL unit to assist in OSL dating of geological materials.     

An enhanced constitutive model for crushable granular materials

Studies in the past have tried to reproduce the mechanical behaviour of granular materials by proposing constitutive relations based on a common assumption that model parameters and parameters describing the properties, including gradation of individual grains are inevitably linked. However successful these models have proved to be, they cannot account for the changes in granular assembly behaviour if the grains start to break during mechanical loading. This paper proposes to analyse the relation between grading change and the mechanical behaviour of granular assembly. A way to model the influence of grain breakage is to use a critical state‐based model. The influence of the amount of grain breakage during loading, depending on the individual grain strength and size distribution, can be introduced into constitutive relations by means of a new parameter that controls the evolution of critical state with changes in grain size distribution. Experimental data from a calcareous sand, a quartz sand, and a rockfill material were compared with numerical results and good‐quality simulations were obtained. The main consequences of grain breakage are increased compressibility and a gradual dilatancy disappearance in the granular material. The critical state concept is also enriched by considering its overall relation to the evolution of the granular material. Copyright © 2009 John Wiley & Sons, Ltd.     

Elimination of Carbamazepine,Diclofenac and Naproxen from Treated Wastewater by Nanofiltration

Most conventional wastewater treatment plants remove very small amounts of micropollutants, such as pharmaceuticals. Here, the ability of two different types of submerged nanofiltration flat sheet modules to remove pharmaceuticals from wastewater is analyzed. The two nanofiltration membranes were used at relatively low pressures of only 0.3 and 0.7 bar. At such low pressures, the membranes did not retain salts to a great extent. This is advantageous in wastewater treatment because no salt concentrate is produced. Carbamazepine was retained only slightly by the nanofiltration membranes, whereas approximately 60% of diclofenac and naproxen were retained by both membranes. This level of effectiveness might not be enough to justify the use of such a system as an additional treatment step in wastewater treatment plants.     

Evaluation of Hydraulic Properties of Aquitards Using Earthquake‐Triggered Groundwater Variation

The hydraulic properties of aquitards are not easily obtained because monitoring wells are usually installed in aquifers for groundwater resources management. Earthquake‐induced crust stress (strain) triggers groundwater level variations over a short period of time in a large area. These groundwater anomalies can be used to investigate aquifer systems. This study uses a poroelastic model to fit the postseismic variations of groundwater level triggered by the Chi‐Chi earthquake to evaluate the hydraulic properties of aquitards in the Jhoushuei River alluvial fan (JRAF), Taiwan. Six of the adopted eight wells with depths of 70 to 130 m showed good agreement with the recovery theory. The mean hydraulic conductivities (K) of the aquifers for the eight wells are 1.62 × 10^?4 to 9.06 × 10^?4 m/s, and the thicknesses are 18.8 to 46.1 m. The thicknesses of the aquitards are 11.3 to 42.0 m. Under the isotropic assumption for K, the estimated values of K for the aquitards are 3.0 × 10^?8 to 2.1 × 10^?6 m/s, corresponding to a silty medium. The results match the values obtained for the geological material of the drilling core and those reported in previous studies. The estimated values were combined with those given in previous studies to determine the distribution of K in the first two aquitards in the JRAF. The distribution patterns of the aquitards reflect the sedimentary environments and fit the geological material. The proposed technique can be used to evaluate the K value of aquitards using inverse methods. The inversion results can be used in hydrogeological analyses, contaminant modeling, and subsidence evaluation.     

Fossil wood

Plants have been making wood (secondary xylem) for more than 370 million years. This familiar material is one of the keys to their massive success. Wood allows plants to attain breathtaking heights and maximize the capture of sunlight for growth. By creating complex, multi‐layered forests, the evolution of wood, has done more to shape life on land than almost any other innovation. Wood is one of the most common terrestrial fossils encountered in the geological record. Whether preserved as huge petrified logs or as minute chunks of charcoal, fossil wood is abundant in rocks of Late Devonian age and younger. It is of enormous scientific importance, shedding light on the identity and stature of ancient trees. As a record of growth over a sustained period, it also tells us much about the climates and environments in which those trees lived. In this article, I explain some aspects of the origin, evolution, preservation, and identification of fossil wood, and emphasise its great significance for geology.