Particle Size Distributions of Clay-rich Sediments and Pure Clay Minerals: A Comparison of Grain Size Analysis with Sedimentation Field-Flow Fractionation

Two clay-rich coastal sediment samples have been characterised together with three pure clays identified as major components of the sediment samples. The mineralogy of the sediments was determined by X-ray diffraction, and their bulk properties measured (organic carbon content, leachable iron and manganese, surface area and cation exchange capacity). A simple approach is used to model the properties of the sediments from those of their pure clay components. Good agreement is found for cation exchange capacity and specific surface area indicating that the clay minerals are the most important constituents influencing the sediments' surface properties. Particle size distributions were assessed by conventional grain size analysis, and also by Sedimentation Field-Flow Fractionation (SedFFF). These two approaches yield sharply differing size distributions; in particular, conventional grainsize analysis indicates a much greater proportion of submicron particles. Similar results are obtained from analysis of pure clays. The most likely reason for this is artifacts introduced in the unavoidable 1 m prefractionation used for SedFFF.     

Kinetics of intracrystalline order-disorder reactions in tremolite

The temperature dependent Fe-Mg distribution in tremolite from Zillertal, Austria was investigated using Mössbauer spectroscopy. The standard free energy change for the exchange reaction Fe²⁺(M4)+Mg(M2)=Mg(M4)+Fe²⁺(M2) decreases with increasing temperature, corresponding to an enthalpy term of 9.2±1.5 kcal/mole and an entropy term of 1.9±1.7 cal/mole K. Kinetic experiments performed as hydrothermal runs, yield an activation energy of 70±7 kcal/mole for the disordering reaction. Difficulties in analysing the very small amount of Mg(M4) in the natural sample introduce large errors in the calculation of cooling rates for the natural rock. The estimated error in the Mg(M4) site occupancy results in a shift of the obtained cooling rate of about three orders of magnitude, making tremolite less useful for estimations of rock cooling rates.     

Stomach contents in Baltic fourhorn sculpin (Myoxocephalus quadricornis L.) with normal and deformed spinal vertebrae

In the northern part of the Baltic Sea, the Gulf of Bothnia, fourhorn sculpin (Myoxocephalus quadricornis) is one of the dominant fish species. A considerable proportion of the population (up to 54% of fish in gill net catches) have been reported to have spinal deformations, with a higher frequency in polluted than in clean areas. The stomach content of sculpins with normal and with severely deformed backbone were compared, but no statistically significant differences were revealed. The diet was generally dominated by the isopod Mesidotea entomon and three-spined stickleback (Gasterosteus aculeatus).     

Geochemical prospecting for stratabound mineralization in late Precambrian sediments of East Greenland (72–74°N)

A geochemical investigation was carried out mainly in a 14-km thick sedimentary sequence of late Precambrian age. The project included analysis of rock samples and drainage samples for Cu, Co, and Zn. The drainage samples were heavy-mineral concentrates and stream sediment samples.The results for the drainage sediments distinguish three well defined cupriferous horizons in the sedimentary column. Lithogeochemical studies of quartzites, pelites, and carbonates confirm that the anomalous values obtained in the drainage sediments arise from several Cu-mineralized horizons.The study has shown that geochemical prospecting appears to be well suited to Cu prospecting in Central East Greenland under arctic climate conditions even with a low sampling density of one sample per 5–10 km² for the drainage samples, and one sample per 10–100 m of the sedimentary stratigraphic column for the rock samples.     

Spatial restructuring and land consolidation of urban-rural settlement in mountainous areas based on ecological niche perspective

With the socio-economic development associated with urbanization, the urban-rural relationship has changed across the world. In China, due to the urban-rural dual structure, these changes turn out to be more complicated. Spatial restructuring are suggested as the main strategies and spatial supporting platforms for urban-rural development. However, the theory still lacks solid methodology and support from systematic empirical studies. This study seeks an adequate scientific methodology and discusses the difference of urban-rural transformation in plains and mountainous areas. A case in Shanghang County, China, demonstrates: 1) The compound ecological niche model can be a suitable approach in urban-rural restructuring, especially in mountainous areas. 2) The urban-rural development area with highly inappropriate, slightly appropriate, moderately appropriate, and highly appropriate areas are 1273.2 km² (44.69%); 906.1 km² (31.80%); 509.4 km² (17.88%); and 160.1 km² (5.62%), respectively. 3) The “deserting villages” in mountainous areas play positive synergistic roles in urbanization, in contrast to the “hollowing villages” common in plain areas. 4) The central town-village will become the most important settlement in mountainous areas. Therefore, we suggest more attention should be paid to environmental capacity in the construction of central town-villages. This study significantly extends the understanding of “hollowing village” theory and regional planning.     

Assessing climate change impacts on the Iberian power system using a coupled water-power model

Climate change is expected to have a negative impact on the power system of the Iberian Peninsula; changes in river runoff are expected to reduce hydropower generation, while higher temperatures are expected to increase summer electricity demand, when water resources are already limited. However, these impacts have not yet been evaluated at the peninsular level. We coupled a hydrological model with a power market model to study three impacts of climate change on the current Iberian power system: changes in hydropower production caused by changes in precipitation and temperature, changes in temporal patterns of electricity demand caused by temperature changes, and changes in irrigation water use caused by temperature and precipitation changes. A stochastic dynamic programming approach was used to develop operating rules for the integrated system given hydrological uncertainty. We found that changes in precipitation will reduce runoff, decrease hydropower production (with accompanying increases in thermal generation), and increase irrigation water use, while higher temperatures will shift power demand from winter to summer months. The combined impact of these effects will generally make it more challenging to balance agricultural, power, and environmental objectives in the operation of Iberian reservoirs, though some impacts could be mitigated by better alignment between temporal patterns of irrigation and power demands.     

Surficial geology indicates early Holocene faulting and seismicity,central Sweden

In Sweden, knowledge of the location and timing of glacially induced faulting and seismicity is critical to effective engineering of a long-term nuclear disposal facility. To improve understanding and modeling of the complex ice-induced and tectonic stresses associated with glacially induced faulting, field studies detailing the location and timing of movement of such structures are required. Although the fault has not been confirmed in the bedrock, multi-proxy surficial geologic evidence indicates that the recently discovered scarp in Bollnäs is such a structure. Machine-excavated trenches across the scarp reveal landsliding down the scarp and, in one location, faulted and vertically offset fine-grained glacial sediments. The presence of water-escape structures in trenches excavated on a topographic high strongly suggests a co-seismic origin derived from earthquake magnitudes >5.5. Numerous landslides in till exist in the region as well. Four slopes with landslides were examined in detail, and the factors of safety for these slopes indicate stable conditions and suggest a seismic trigger. Basal radiocarbon dates from peat bogs located stratigraphically above the landslides provide minimum limiting ages for the co-seismic landslides. The oldest date indicates sliding prior to 10,180 calendar years before the present. The proposed Bollnäs Fault is 400 km south of the so called Lapland Fault Province. To date, it is the southernmost confirmed glacially induced fault in Sweden. The results of this study are consistent with existing modeling results that indicate fault instability in this region of central Sweden following deglaciation.     

A Paleogeographic and Depositional Model for the Neogene Fluvial Succession,Pishin Belt,Northwest Pakistan: Effect of Post Collisional Tectonics on Sedimentation in a Peripheral Foreland Setting

Detailed facies analysis of the Neogene successions of the Pishin Belt (Katawaz Basin) has enabled documentation of successive depositional systems and paleogeographic settings of the basin formed by the collision of the northwestern continental margin of the Indian Plate and the Afghan Block. During the Early Miocene, subaerial sedimentation started after the final closure of the Katawaz Remnant Ocean. Based on detailed field data, twelve facies were recognized in Neogene successions exposed in the Pishin Belt. These facies were further organized into four facies associations i.e. channels, crevasse splay, natural levee and floodplain facies associations. Facies associations and variations provided ample evidence to recognize a number of fluvial architectural components in the succession e.g., low‐sinuosity sandy braided river, mixed‐load meandering, high‐sinuosity meandering channels, single‐story sandstone and/or conglomerate channels, lateral accretion surfaces (point bars) and alluvial fans. Neogene sedimentation in the Pishin Belt was mainly controlled by active tectonism and thrusting in response to the oblique collision of the Indian Plate with the Afghan Block of the Eurasian Plate along the Chaman‐Nushki Fault. Post Miocene deformation of these formations successively caused them to contribute as an additional source terrain for the younger formations.