Early contamination of European flounder (Platichthys flesus) by PCDD/Fs and dioxin-like PCBs in European waters

Contamination levels and profiles of 7 polychlorinated-p-dioxins, 10 polychlorinated furans (PCDD/Fs) and 12 dioxin-like polychlorinated biphenyls (dl-PCBs) were investigated in juvenile European flounder (Platichthys flesus) captured in different nursery areas in the northeastern Atlantic coast across its geographical distribution range. The toxic equivalent concentrations (WHO-TEQ_fish) were also determined in order to evaluate which P. flesus population was more exposed to dioxin-like toxicity. Juveniles caught in the Sørfjord (Norway) showed the lowest WHO-TEQ_fish concentration (0.052 pg WHO-TEQ_fish g⁻¹ wet weight) whereas the highest value was observed in fish from the Wadden Sea (The Netherlands; 0.291 pg WHO-TEQ_fish g⁻¹ ww), mainly due to the greater contribution of 2,3,7,8-tetrachlorodibenzo-p-dioxin, the most toxic congener. Nonetheless, when comparing the results with existent tissue residue-based toxicity benchmarks, no adverse effects resulting from PCDD/Fs and dl-PCBs are expected to occur in flounder from the studied systems.     

The energy balance experiment EBEX-2000. Part II: Intercomparison of eddy-covariance sensors and post-field data processing methods

The eddy-covariance method is the primary way of measuring turbulent fluxes directly. Many investigators have found that these flux measurements often do not satisfy a fundamental criterion—closure of the surface energy balance. This study investigates to what extent the eddy-covariance measurement technology can be made responsible for this deficiency, in particular the effects of instrumentation or of the post-field data processing. Therefore, current eddy-covariance sensors and several post-field data processing methods were compared. The differences in methodology resulted in deviations of 10% for the sensible heat flux and of 15% for the latent heat flux for an averaging time of 30 min. These disparities were mostly due to different sensor separation corrections and a linear detrending of the data. The impact of different instrumentation on the resulting heat flux estimates was significantly higher. Large deviations from the reference system of up to 50% were found for some sensor combinations. However, very good measurement quality was found for a CSAT3 sonic together with a KH20 krypton hygrometer and also for a UW sonic together with a KH20. If these systems are well calibrated and maintained, an accuracy of better than 5% can be achieved for 30-min values of sensible and latent heat flux measurements. The results from the sonic anemometers Gill Solent-HS, ATI-K, Metek USA-1, and R.M. Young 81000 showed more or less larger deviations from the reference system. The LI-COR LI-7500 open-path H₂O/CO₂ gas analyser in the test was one of the first serial numbers of this sensor type and had technical problems regarding direct solar radiation sensitivity and signal delay. These problems are known by the manufacturer and improvements of the sensor have since been made. The National Center for Atmospheric Research is supported by the National Science Foundation.     

Travel time computations using a compact eikonal equation for vertical transverse isotropic media

Eikonal solvers often have stability problems if the velocity model is mildly heterogeneous. We derive a stable and compact form of the eikonal equation for P‐wave propagation in vertical transverse isotropic media. The obtained formulation is more compact than other formulations and therefore computationally attractive. We implemented ray shooting for this new equation through a Hamiltonian formalism. Ray tracing based on this new equation is tested on both simple as well as more realistic mildly heterogeneous velocity models. We show through examples that the new equation gives travel times that coincide with the travel time picks from wave equation modelling for anisotropic wave propagation.     

Reconstructing recent sedimentation in two urbanised coastal lagoons (NSW,Australia) using radioisotopes and geochemistry

In this study, we combined grain size and geochemical analyses with radioisotope analysis of lead-210 (²¹⁰Pb), caesium-137 (¹³⁷Cs) and radiocarbon (¹⁴C) ages to reconstruct the sedimentation history of two urbanised coastal lagoons in south-east Australia. Towradgi and Fairy Lagoons were both found to exhibit slow initial sedimentation of less than 1 mm year⁻¹ prior to anthropogenic influences. Land clearing in the catchments increased runoff and erosion in the creeks feeding into the estuaries, and has resulted in progradation of fluvial material into the estuarine systems with a marked increase in sedimentation to between 2 and 7 mm year⁻¹. The upper 20–50 cm of the sediment column in both lagoons contained elevated concentrations of heavy metals such as Pb, Cu, Ni and Zn. This pollution trend was found to be consistent with the history of industrialisation and urbanisation in the region, which expanded rapidly post World War 2. The total metal concentrations were consistent with other urbanised/industrialised estuaries around the world. Despite the fairly disturbed nature of these coastal lagoons, the use of ²¹⁰Pb, ¹³⁷Cs and ¹⁴C dating in combination with bulk geochemical analyses allowed detailed reconstruction of sedimentation history.     

Strike-slip fault bridge fluid pumping mechanism: insights from field-based palaeostress analysis and numerical modelling

We present a finite-element study of stress perturbation in evolving compressive and extensional strike-slip fault bridges. The results are compared with a fracture study of a compressive bridge at St Donats, UK. Horizontally interbedded calcareous mudstone and bioclastic calcilutite at St Donats have a distinct vertical permeability anisotropy. This sedimentary sequence behaves as a set of horizontal aquifers. The fluid flow in these aquifers is sensitive to mean stress gradients. Paleostress analysis of field fracture data, verified by finite-element modelling, indicates a rotation of σ₁ towards parallelism with boundary faults inside the growing compressive bridge. Boundary faults and bridge faults recorded numerous fluid flow events. The modelled mean stress pattern shows a regional maximum within the bridge and local maxima/minima pairs at boundary fault tips.Finite-element modelling of an extensional bridge indicates that σ₃ rotates towards parallelism with boundary faults. The mean stress pattern is similar to the pattern in compressive bridge but with maxima and minima locations interchanged. The stress patterns are reestablished by each stress build-up preceding the rupturation of the boundary faults throughout the development stages of strike-slip fault bridges. Mean stress gradients developed pre-failure control the fluid flow in fractures of the strike-slip fault system at and after the end of each stress build-up and the fluid flow in boundary faults post-failure. Fracture reactivation and new fracture generation within an evolving bridge is a process consisting of multiple successive events that retain the storage capacity of the bridge. Rupture and sealing of the main bounding-faults is a step-wise process that opens and closes fluid conduits between areas with different pressures.     

The influence of mussel beds on nutrients in the Western Wadden Sea and Eastern Scheldt estuaries

The uptake and release of materials by intertidal mussel beds were directly measured in two cultivated Dutch estuaries. Generally, chlorophylla, seston, and particulate organic carbon were taken up, while ammonium, orthophosphate, and silicate were released. The observed rates were higher than values computed from organismic observations and similar to those observed for intertidal oyster reefs in South Carolina. Specific estuarine material turnover rates varied from 1 week to 38 weeks when calculated with mussel bed fluxes. The fastest turnover rates were for chlorophylla and ammonium. These results support the idea that dense assemblages of bivalves are major components in the recycling of nutrients in estuaries.     

Influence of geometrical variations on morphodynamic equilibria in short tidal basins

Ocean Dynamics - The existence of cross-sectionally averaged morphodynamic equilibria of tidal inlets is investigated, using a cross-sectionally averaged model, and their sensitivity to variations...     

Seasonal variability in somatic and reproductive investment of the bivalve Scrobicularia plana (da Costa, 1778) along a latitudinal gradient

Monthly investment in soma and gonads in the bivalve Scrobicularia plana is described for three populations along its distributional range: Minho estuary, Portugal; Westerschelde estuary, The Netherlands and Buvika estuary, Norway. Seasonal cycles in body mass (BMI), somatic mass (SMI) and gonadal mass (GMI) indices were observed for all populations. In Portugal, BMI and SMI peaked in mid-autumn, while in The Netherlands both indices were at their highest in mid-spring. Norway showed a different pattern with two distinct peaks: one in mid-autumn and a second peak in spring. GMI reached maximum values in July in Portugal and Netherlands and in June in Norway. Overall, mean BMI and SMI were lower in Portugal while mean GMI was lower in Norway. The spawning period lasted the whole summer in Portugal, but was shorter (only two months) in The Netherlands and Norway. The reproductive investment in The Netherlands was significantly higher than in Portugal and Norway, with the lowest values being observed in Norway. Differences in annual cycles between populations were attributed to environmental factors, namely temperature and food availability. Temperature seems important in shaping the reproductive pattern with more northern populations showing shorter reproductive periods starting later in the year, and a lower reproductive output. In addition, winter water temperatures can explain the lower mean body and somatic mass values observed in Portugal. Food availability influenced the physiological performance of the species with peaks in somatic mass coinciding with phytoplankton blooms. This relation between physiological performance and environmental factors influences S. plana distribution, densities and even survival, with natural consequences on its commercial importance.     

Tectonics and global change - inferences from Late Cenozoic subsidence and uplift patterns in the Atlantic/ Mediterranean region

Quantitative subsidence analysis for a number of rifted basins in the northern Atlantic/Mediterranean region provides evidence for rapid phases of PlioQuaternary subsidence. The observed acceleration in tectonic subsidence occurs after a phase of general quiescence in subsidence in these basins and deviates from predictions of stretching models. The latter indicate a decay of subsidence with time after Mesozoic-Tertiary basin formatioh and a slow tectonic subsidence in Plio-Quaternary times. A possible explanation for the observed patterns of anomalous subsidence could be an increase in the level of intraplate compression in the northern Atlantic region. Intraplate stress changes in the Plio-Quaternary are related to the dynamics of African/ Eurasian collision processes and a reorganization of spreading directions in the AtlAntic, possibly reflecting a plate reorganization of global nature.
It seems that the Plio-Quaternary record reflects a period of increased levels of neotectonic activity, interplaying with periods of (de)glaciation. Stress-induced topography in the onshore parts of continental margins, coupled with the stress-induced subsidence in the offshore deeper parts of the basins, could have contributed to recent phases of uplift in Fennoscandia, augmenting the uplift induced by glacial unloading. Estimates of ice thicknesses are directly inferred from the observed uplift ignoring other driving mechanisms whereas topography plays a crucial role in the dynamics of glaciation. It is, therefore, important to quantdy the interplay of rapid tectonic uplift and subsidence phases with climatic effects during the Plio-Quaternary.