Seasonal variations of the surface currents in the Tsushima Strait

Seasonal variations of the surface currents in the Tsushima Strait were investigated by analyzing the monthly mean surface currents measured with HF radar. Several new features of the surface currents have been found. One notable feature is the large, complicated seasonal variation in the current structure in the eastern channel of the strait. For example, in the southeastern and northwestern regions of the channel, southwestward countercurrents are found in summer while southeastward acrossshore currents are found in autumn and winter. The wind-driven flow (Ekman flow) as well as surface geostrophic currents are responsible for these complicated variations of the surface currents. To quantify each variation of the flow and current, the wind-driven flow was calculated from the monthly wind (more precisely, the friction velocity) using the monthly speed factor and deflection angle estimated in our previous study, and the surface geostrophic currents were then estimated by subtracting the wind-driven flow from the measured surface currents. It was found that the acrossshore currents are the wind-driven flow, and that the surface geostrophic currents flow almost in the along-shore direction, indicating the validity of the decomposition of the surface velocity into the wind-driven flow and the geostrophic currents using the speed factor and deflection angle. A real-vector empirical orthogonal function (EOF) analysis of the surface geostrophic currents shows a pair of eddies in the lee of Tsushima and Iki Islands as the first mode, which indicates that the southwestward countercurrents in the eastern channel are formed primarily by the incoming Tsushima Warm Current.     

Distribution of deep near-inertial waves observed in the Kuroshio Extension

The distribution of deep near-inertial waves (NIWs) is investigated using data mainly from an array of 46 near-bottom acoustic current meter sensors spanning a 600 km × 600 km region as part of the Kuroshio Extension System Study during 2004–2006. The deep NIW distribution is interpreted in the context of both upper-layer and near-bottom mapped circulations. The wintertime-mean mixed-layer NIW energy input, modeled from observed wind stress, has the same range of values north and south of the Kuroshio Extension in this region. Yet, the wintertime-mean deep NIW energy distribution reveals a sharp factor-of-5 decrease from north to south of the Kuroshio jet. This direct observational evidence shows that the Kuroshio Extension blocks the equatorward propagation of NIWs. The NIW energy that does reach the sea floor within the subset of wintertime observations in the subtropical gyre arrives with patchy spatial and temporal distribution. Elevated NIW energy in deep water is associated with anticyclones in the deep barotropic flow and unassociated with upper layer eddies.     

Benthic habitat quality change as measured by macroinfauna community in a tidal flat on the west coast of Korea

Yellow Sea tidal flats are internationally recognised for their contribution to biological diversity and yet are under enormous pressure from reclamation, pollution and overexploitation. The benthic macroinfauna community is the dominant community on these tidal flats and a reliable indicator of benthic environmental changes. We surveyed the current benthic macroinfauna community of the Ganghwa Southern Tidal Flat, the largest remaining Korean mud flat in the Yellow Sea, in order to examine changes in the environmental situation of this benthic ecosystem. The results show a significant decline in species diversity from the last survey made in 2003, and a shift in species composition with appearances of polychaetes indicative of pollution and physical disturbances and other opportunistic species becoming dominant in both density and biomass. The benthic community shift observed during the two study periods may be associated with increased nutrient pollution as well as increased physical disturbances in this area. However, we recognise the limitations of the data both in frequency and scope but believe the significant changes to the composition of the benthic fauna are sufficient to warrant concern. Observations are required to examine the extent to which these human activities induce benthic community shift in this tidal flat.     

Pathologic survey on the Manila clam <Emphasis Type="Italic">Ruditapes philippinarum</Emphasis> (Adams and Reeve 1850) from Haeju off the western coastal Yellow Sea

Pathologic condition of Manila clam, Ruditapes philippinarum collected from Haeju off the west coast of North Korea in February and March 2007 was investigated in this study. The diagnostics included a protozoan parasite, Perkinsus olseni, the brown ring disease (BRD) caused by bacteria Vibrio tapetis and metazoan parasites Trematod and Cestod. P. olseni infection was examined using histology and Ray’s fluid thioglycollate medium (RFTM) assay along with Choi’s NaOH digestion technique. Trematode and cestode infection was also examined from the histology. A total of 140 clams with 35–45 mm in shell length (2–3 years old) were analyzed. Condition factor (CF), a ratio of the wet tissue weight to the shell dry weight, ranged from 0.445±0.074 (February) to 0.544±0.132 (March). Total body burden of P. olseni (i.e. infection intensity) ranged from 18,644±37,755 (February) to 26,933±80,611 cells/g wet tissue (March) with the prevalence of 76.7–43.3% (March) respectively. Prevalence of trematode and cestode infection in February and March varied 22.5–25.0 and 15.0–22.5% respectively. Infection intensity of V. tapetis ranged 1–2 and the prevalence was 1.4 (February) and 5.7% (March). Prevalence and infection intensity of P. olseni in clams from Haeju was comparatively lower than those of clams reported on the west coast of Korea. BRD and the other metazoan parasite infection were also relatively lower or similar to the condition of the clams reported previously. CF of Haeju clams was also relatively higher than the clams in Gyeonggi Bay and Taean, suggesting that Haeju clams had relatively better pathologic and health condition.     

Hydraulic roughness over simple subaqueous dunes

Detailed studies of flow over subaqueous dunes in laboratory flumes were used to suggest a virtual near-bed layer of twice the dune height in which the mean velocity is accelerated towards the crest by contraction. The mean flow velocity in this layer above the crest, transformed into friction velocity by means of the surface skin roughness, is shown to give values consistent with measured values. The resulting dimensionless shear stress due to skin friction is depth-independent, in contrast to that derived by means of often cited traditional methods. As a result of the relationship between dune height and the thickness of the near-bed layer, an expression for the expansion loss behind dunes was formulated and used to relate form resistance directly to dune height.     

Shallow sediment deformation styles in north-western Campeche Knolls,Gulf of Mexico and their controls on the occurrence of hydrocarbon seepage

During German R/V Meteor M67/2 expedition to Campeche Knolls, southern Gulf of Mexico, a set of 2D high resolution seismic data was acquired to study the near-surface sediment structure and its relationship with hydrocarbon seepages in this salt province. The comprehensive survey covered 20 individual bathymetric highs or ridges and identified three principle structural types: Passive Type, Chaopopte Type, and Asymmetric Flap Type. The first type is the result of passive diapirism, whereas the latter two were initialized by a regional compressional event in the Miocene, but are later differently modified by salt tectonism. Chapopote Type structures appear as symmetrical domes, with uplifted coarse-grained Miocene sediments in their cores and rather thin syn-kinematic sediments covering the crests. Asymmetric Flap Type structures are also first folded as domes or ridges, but one flap later subsided together with salt evacuation, resulting in single uplifted monoclines. With the coarse-grained pre-kinematic sediments as reservoir units, both structural types can focus and accumulate hydrocarbons. The geometries of the structures suggest that hydrocarbons are accumulated in the center of the Chapopote Type structures and in the subsided flaps of the Asymmetric Flap Type structures. Hydrocarbon leakage from these thinly sealed reservoirs is regarded as the principle mechanism for the seepage in the study area, and accordingly the most seepage-prone positions are above these reservoirs. The seep locations suggested by analysis of sea-surface oil slick images of SAR satellite data are also examined in this study. These independently derived seep locations confirm the seepage-prone positions to be above the shallow buried reservoirs. This study suggest that the shallow sediment structures control the distribution of the hydrocarbon seeps of the north-western Campeche Knolls, although the hydrocarbons are sourced from the greater depth.     

Crossing Filaments

Solar filaments show the position of large-scale polarity-inversion lines and are used for the reconstruction of large-scale solar magnetic field structure on the basis of Hα synoptic charts for the periods that magnetographic measurements are not available. Sometimes crossing filaments are seen in Hα filtergrams. We analyze daily Hα filtergrams from the archive of Big Bear Solar Observatory for the period of 1999 – 2003 to find crossing and interacting filaments. A number of examples are presented and filament patterns are compared with photospheric magnetic field distributions. We have found that all crossing filaments reveal quadrupolar magnetic configurations of the photospheric field and presume the presence of null points in the corona.     

Mapping the thickness of sediments in the Ljubljana Moor basin (Slovenia) using microtremors

The Ljubljana Moor basin is characterized by moderate bedrock topography and thicknesses of Quaternary lacustrine and fluvial sediments ranging from 0 to 200 m. More than 65 boreholes which reached the bedrock were drilled in the area, but their distribution in the basin is very uneven and some data from the boreholes uncertain. There are also no data on S-velocity distribution within the basin, but seismic refraction measurements pointed out a rather uniform increase of P-velocity with depth, great impedance contrast with the bedrock and relatively small lateral velocity variations. The microtremor horizontal-to-vertical spectral ratio (HVSR) method was therefore applied as a complementary tool to seismic refraction survey to map the thickness of sediments. First, microtremors were measured at the locations of boreholes which reached the bedrock and the resonance frequencies determined. The inverse power relationship between the resonance frequency and the thickness of sediments was then determined from 53 data pairs. The quality of the correlation is moderate due to possible heterogeneities in sediments and possible 3D effects in some minor areas, but the obtained parameters correspond well to the values obtained in six other European basins. Secondly, a 16 km-long discontinuous seismic refraction profile was measured across the whole basin, leaving uncovered some larger segments where active seismic measurements were not possible. Microtremors were then measured at 64 locations along the same profile, using 250 m point spacing, without leaving any gaps. The frequency–thickness relationship was used to invert resonance frequencies to depths. These were first validated using the results of the seismic refraction survey, which showed good agreement, and finally used for interpolation in the segments of missing refraction data to obtain a continuous depth profile of the bedrock. The study has shown that the microtremor method can be used as a complementary tool for mapping the thickness of unconsolidated sediments also in areas characterized by moderate bedrock topography. As the input data are always to some extent uncertain, it is important to have a sufficiently large number of borehole data to establish a frequency–thickness relationship, as well as some additional independent geophysical information for its validation.     

Correlation between molecular absorption spectral slope ratios and fluorescence humification indices in characterizing CDOM

Ultraviolet–visible absorption spectral slope ratios S_R (slope in 275–295 nm divided by slope in 350–400 nm) and humification index (HIX, integrated fluorescence emission in 435–480 nm divided by that in 435–480 and 300–345 nm) were compared when characterizing chromophoric dissolved organic matter (CDOM) in three humic acids and 44 whole water samples. HIX increased with increasing pH for humic acids, while their S_R showed much more complicated dependencies on pH. There was a negative correlation between S_R and HIX. S_R increased in the order terrestrial coal/peat < terrestrial soil/river < seawater, while HIX increased in the order seawater < terrestrial soil/river < terrestrial coal/peat. The comparative study in this work indicates that terrestrially derived CDOM has higher HIX and lower S_R than marine CDOM. Investigators may potentially use these two indices to compare qualitatively the character of CDOM in different sources (e.g., terrestrial vs. marine).     

Upscaling permeability for three-dimensional fractured porous rocks with the multiple boundary method

Upscaling permeability of grid blocks is crucial for groundwater models. A novel upscaling method for three-dimensional fractured porous rocks is presented. The objective of the study was to compare this method with the commonly used Oda upscaling method and the volume averaging method. First, the multiple boundary method and its computational framework were defined for three-dimensional stochastic fracture networks. Then, the different upscaling methods were compared for a set of rotated fractures, for tortuous fractures, and for two discrete fracture networks. The results computed by the multiple boundary method are comparable with those of the other two methods and fit best the analytical solution for a set of rotated fractures. The errors in flow rate of the equivalent fracture model decrease when using the multiple boundary method. Furthermore, the errors of the equivalent fracture models increase from well-connected fracture networks to poorly connected ones. Finally, the diagonal components of the equivalent permeability tensors tend to follow a normal or log-normal distribution for the well-connected fracture network model with infinite fracture size. By contrast, they exhibit a power-law distribution for the poorly connected fracture network with multiple scale fractures. The study demonstrates the accuracy and the flexibility of the multiple boundary upscaling concept. This makes it attractive for being incorporated into any existing flow-based upscaling procedures, which helps in reducing the uncertainty of groundwater models.