Explosion seismic reflections from the Earth’s core

Recent seismological studies have presented evidence for the existence of a layer with ultra-low seismic velocities at the core-mantle boundary at ca. 2900 km depth. We report high-amplitude, high-frequency, and laterally coherent seismic arrivals from three nuclear explosions in Siberia. With recording station intervals of 15 km, the seismic phases are readily correlated and show the presence of a thin, ultra-low velocity zone in a region where it was not previously reported. The duration and complexity of the arrivals are inconsistent with a simple core-mantle boundary and require a hitherto unidentified, kilometre-scale, fine structure in the ultra-low velocity zone. The observations may be explained by a ca. 7 km thick, two-layer, ultra-low velocity zone with exceptional low velocities, which indicate the presence of high percentages of melt (>15%), in particular in the lower part of the zone. Waveform variation implies lateral change in the thickness and physical properties of the ultra-low velocity zone with a wavelength of less than 100 km.     

Evaluating foundation mass,damping and stiffness by the least‐squares method

This paper discusses how to use the three‐dimensional (3D) time‐domain finite‐element method incorporating the least‐squares method to calculate the equivalent foundation mass, damping and stiffness matrices. Numerical simulations indicate that the accuracy of these equivalent matrices is acceptable when the applied harmonic force of 1+sine is used. Moreover, the accuracy of the least‐squares method using the 1+sine force is not sensitive to the first time step for inclusion of data. Since the finite‐element method can model problems flexibly, the equivalent mass, damping and stiffness matrices of very complicated soil profiles and foundations can be established without difficulty using this least‐squares method. Copyright © 2003 John Wiley & Sons, Ltd.     

An Efficient Numerical Method for Computing Synthetic Seismograms for a Layered Half-space with Sources and Receivers at Close or Same Depths

— It is difficult to compute synthetic seismograms for a layered half-space with sources and receivers at close to or the same depths using the generalized R/T coefficient method (Kennett, 1983; Luco and Apsel, 1983; Yao and Harkrider, 1983; Chen, 1993), because the wavenumber integration converges very slowly. A semi-analytic method for accelerating the convergence, in which part of the integration is implemented analytically, was adopted by some authors (Apsel and Luco, 1983; Hisada, 1994, 1995). In this study, based on the principle of the Repeated Averaging Method (Dahlquist and Björck, 1974; Chang, 1988), we propose an alternative, efficient, numerical method, the peak-trough averaging method (PTAM), to overcome the difficulty mentioned above. Compared with the semi-analytic method, PTAM is not only much simpler mathematically and easier to implement in practice, but also more efficient. Using numerical examples, we illustrate the validity, accuracy and efficiency of the new method.     

On the circulation in the East Frisian Wadden Sea: numerical modeling and data analysis

 In this paper we use a combination of numerical modeling and data analysis to gain a better understanding of the major characteristics of the circulation in the East Frisian Wadden Sea. In particular, we concentrate on the asymmetry of the tidal wave and its modulation in the coastal area, which results in a complex pattern of responses to the sea-level forcing from the North Sea. The numerical simulations are based on the 3-D primitive equation General Estuarine Transport Model (GETM) with a horizontal resolution of 200 m and terrain-following vertical coordinates. The model is forced at its open boundaries with sea-level data from an operational model for the German Bight (German Hydrographic Office). The validation data for our model simulations include time series of tidal gauge data and surface currents measured at a pile in the back-barrier basin of the Island Langeoog, as well as several ADCP transects in the Accumer Ee tidal inlet. Circulation and turbulence characteristics are investigated for typical situations driven by spring and neap tides, and the analysis is focused on dominating temporal and spatial patterns. By investigating the response of five back-barrier basins with rather different morphologies to external forcing, an attempt is made to elucidate the dominating physical balances controlling the circulation in the individual sub-basins. It is demonstrated that the friction at the seabed tends to slow down the tidal signal in the shallow water. This leads to the establishment of flood dominance in the shallow sea north of the barrier islands. South of the islands, where the water volume of the channels at low tide is smaller than the tidal prism, the asymmetry of the tidal signal is shifted towards ebb dominance, a feature which is particularly pronounced at spring tide. At the northern open boundary, the tidal wave propagating from west to east generates a sea-level difference of ∼1 m along the boundary, and thereby triggers vigorous alongshore currents. The frictional control in the model is located in the inlets, as well as along the northern boundary. The correlation between velocity and turbulent kinetic energy tends to the establishment of a net southward transport, giving theoretical support to the observed accumulation of sediments on the intertidal flats. Weak turbulence along the northern shores of the barrier islands and the small magnitude of the residual currents there promote accumulation of suspended matter in these areas, although wave action will generally counteract this effect. Received: 29 May 2002 / Accepted: 26 September 2002 Responsible Editor: Jean-Marie Beckers Acknowledgements We are indebted to S. Dick for providing the data from the operational model of BSH and to B. Flemming for the useful discussions. The topography data and Fig. 1 have been prepared in cooperation with F. Meyer. Figure 2 has been prepared by G. Brink-Spalink. We also thank for the comments from an anonymous reviewer which helped to improve our paper.     

Environmental Emission of Mercury During Gold Mining by Amalgamation Process and its Impact on Soils of Gympie, Australia

— The aims of this study were to estimate the total amount of mercury released to the environment during 60 years of gold mining (1867–1926) at Gympie, Queensland, Australia and to measure the mercury levels in soil samples surrounding the mining activity. We estimated that 1902 tonnes of mercury was released to the environment and about 1236 tonnes of which was released to the air. The mean mercury in the soil samples in the vicinity of the Scottish battery varied from 1.07 to 99.26 μg g^?1 as compared to 0.075 μg g^?1 as background mercury concentrations. The maximum mercury concentration measured in sediments of the Langton Gully was 6.12 μg g^?1. These results show that large amount of mercury was used in this area during gold mining. Since mining is active in the area and Langton Gully flows into Mary River, we therefore, recommend that mercury concentration in air and fish should be monitored.     

Characterisation of the 1997 Vulcanian explosions of Soufrière Hills Volcano,Montserrat, by video analysis

The activity of Convention at Montserrat Soufrière Hills Volcano, Montserrat, during the period 1995–1999 included numerous violent explosions. Two major cycles of Vulcanian explosions occurred in 1997: a first of 13 explosions between 4 and 12 August and a second of 75 between 22 September and 21 October. The explosions were short-lived events lasting a few tens of seconds during which partial fountain collapse generated pyroclastic surges and pyroclastic flows, and buoyant plumes ascended 3–15 km into the atmosphere. Each explosion discharged on average 3×10⁵ m³ (dense-rock equivalent, DRE) of magma, draining the conduit to depths of 1–2 km. The paper focuses on the first few seconds of three explosions of the 75 that occurred in September/October 1997: 6 October 1997 at 17:50, 7 October 1997 at 16:02 and 9 October 1997 at 12:32. Physical parameters such as exit velocities, magmatic water contents and magma pressures at fragmentation are estimated by following and modelling the ascent of individual momentum-dominated finger jets visible on videos during the initial stages of each explosion. The model treats each finger jet as an incompressible flow sustained by a steady flux of gas and particles during the few seconds of ascent, and produces results that compare favourably with those using a multiphase compressible code run using similar eruptive parameters. Each explosion reveals a progressive increase in eruptive intensity with time, jet exit velocities increasing from 40 m s^–1 at the beginning of the explosion up to 140 m s^–1 after a few seconds. Modelling suggests that the first magma to exit was largely degassed, whereas that discharged after a few seconds contained up to 2 wt% water. Magma overpressures up to ~10 MPa are estimated to have existed in the conduit immediately prior to each explosion. Progressive increases in jet exit velocity with time over the first few seconds of each explosion provide direct evidence for strong pre-eruptive gradients in water content and magma pressure in the upper reaches (probably 100–500 m) of the conduit. Fountain collapse occurred during the first 10–20 s of each explosion because the discharging jets had bulk densities up to 100 times that of the atmosphere and were unable to entrain enough air to become buoyant. Such high eruptive densities were due to the presence of partially degassed magma in the conduit.Editorial responsibility: A. Woods     

Indoor Radon Radioactivity at the University of Brunei Darussalam

— Indoor radon radioactivity in the rooms on the ground floor and first floor of the Physics Department, Faculty of Science, Universiti Brunei Darussalam was measured using a system that consists of an air filter pump, ZnS detector, photomultiplier tube and counter. Ground floor rooms' radon radioactivity was found to be about three times higher than that of the first floor. The maximum ground floor indoor radioactivity is only 0.39 Bqm^?3, a value relatively low and safe compared to the mean outdoor radon concentration of 1.41 Bqm^?3 measured (HU and TAN, 2000). The main source of radon emanation originates from the ground soil rather than the building materials.     

Source mechanism of the 22/11/1995 Gulf of Aqaba earthquake and its aftershock sequence

The Gulf of Aqaba earthquake occurred on 22/11/1995 with M _W = 7.2 and was the largest event to occur along the Dead Sea Transform in at least a century. We determined the source mechanism of the event based on the inversion of the P and SH waveforms observed by teleseismic stations. Our solution consists of 2 similar subevents, where the first exhibits a left-lateral strike-slip motion with a normal component and the second subevent shows an almost pure left-lateral strike-slip motion along the gulf major fault system. The total seismic moment is 7.7 × 10²⁶ dyne-cm, with source duration of 15 seconds. The aftershock sequence was recorded by the regional broad band stations BGIO and JER, of the Israel Seismic Network, and KEG, of the MEDNET regional network for earthquakeswith M _W > 4.0. Aftershock epicenter seems to cluster mainly in the Eilat basin and the Aragonese basin. The dominant mechanism indicates left-lateral strike slip motion along the gulf trend, similar to the mainshock.     

The colonization of periphytic diatom species on artificial substrates in the Ashar canal, Basrah, Iraq

Studies have been conducted between March 1993 and March 1994 in the Ashar canal, a backwater of the Shatt al-Arab River, Iraq. Using artificial substrates, the colonization and development of seventy-five diatom species belonging to twenty genera could be revealed. Taxa apportionment varied seasonally as well as within each season. A few species have been found during all experiments. These are Amphora ovalis, Bacillaria paradoxa, Cocconeis placentula var. euglypta, Cyclotella meneghiniana, Cymbella ventricosa, Navicula tripunctata var. schizonemoides, Rhoicosphenia curvata, and Synedra ulna. The occurrence of B. paradoxa in Experiment 1 (March-April 1993) and Experiment 4 (end of January to beginning of March 1994) was higher than 50%. Similarity of species increased towards the end of each season, and the communities from experiments 1 and 4 were more similar than others. The experiments also suggest that week 4 represents the equilibrium phase while week 6 reflects the increase in biological interactions. The results could also indicate the sequence of primary colonizers and the community development towards the equilibrium.     

Water and sediment outbursts from advanced Franz Josef Glacier,New Zealand

The Franz Josef Glacier, Westland, New Zealand, has a history of catastrophic sediment‐laden outburst ?oods associated with extreme rainfall events when the glacier toe is advanced over its own sediments. Consideration of these events and inspection of recent sediment deposits suggest that there are three distinct modes of outburst. The ?rst is associated with fans fed by over?ow along the glacier margin. As the glacier has advanced across its own fore?eld gravels, it is inferred that the primary drainage conduit has developed a reach of negative slope. In high ?ows massive boulders can block the conduit, trapping lesser clasts. The resulting backup of water causes over?ows through marginal moulins, producing the fan type of deposit. The second type of outburst deposits massive imbricated boulders at a greater or lesser distance from the glacier portal. In this case, pressure buildup drives the blockage out of the portal where the boulders deposit. Smaller materials are generally carried away. The third type consists of very shallow ?ows, and produces massive gravel deposits of uncertain provenance. In this condition, the excess pressure in the conduit results in slight uplift of the glacier and widespread discharge of water and sediment below the glacier snout; gravels and smaller sediments are laid down in a massive deposit across the fore?eld. The massive, boulder‐veneered deposit from the December 1995 outburst is interpreted in the light of the above mechanisms as a hyperconcentrated ?ow deposit from hydraulic jacking, overlain by boulders emplaced by a subsequent conduit outburst. A possible association of outbursts with the present advanced position of the glacier is suggested. Copyright © 2003 John Wiley & Sons, Ltd.