A simple model of a building cumulus cloud

Summary A model of a building cumulus structure is described. The one-stage model published in[1] was used to describe ascent of two cloudy parcels that a cloud is supposed to be formed of. The other ascent is assumed to take place after the first cloud element sinks back as a result of evaporative cooling. The numerical results and their evaluation are given for various rates of mixing at the cloud top level of the first cloud volume.     

Monitoring of heat transmission from buildings into geological environment and evaluation of soil deformation consequences in foundation engineering

In engineering geology a number of factors affecting foundation conditions are taken into consideration during engineering-geological investigations. This article deals with the factor of heat sourced from a structure (brick kiln) as a restrictive factor in foundation engineering in clay soils and introduces a documentation of soil deformation observations as an impact of the heat transmission into the geological environment. It was carried out in Southern Moravia in the Czech Republic, where the dominant foundation soils are Neogeneous clays where differential settlements of a tunnel kiln structure occurred as a result of ignoring the boundary conditions of temperature changes in the soil environment. The brick kilns caused heterogeneous spatial changes in the subsoil temperatures. This consequently resulted in differential settlements due to temperature changes originating from the kilns. The differential settlements reached as much as 150 mm. The major objective of the article is to highlight the importance of the heat transmission from buildings into the geological environment as a factor which should be considered in engineering geology and its application in planning. A new procedure for reducing or elimination of ground movements sourced from underlying clayey soils depending on the heat changes was also suggested in this context.     

Vegetation patterns and diversity along an altitudinal and a grazing gradient in the Jabal al Akhdar mountain range of northern Oman

Little is known about the effects of grazing on vegetation composition on the Arabian Peninsula. The aim of this study therefore was to analyse the vegetation response to environmental conditions of open woodlands along an altitudinal and a grazing gradient in the Jabal al Akhdar mountain range of Oman. The species composition, vegetation structure, grazing damage and several environmental variables were investigated for 62 samples using a nested plot design. Classification analysis and a Canonical Variate Analysis (CVA) were used to define vegetation types and to identify underlying environmental gradients. The relationship between environmental variables and diversity was analysed using correlation coefficients and a main-effects ANOVA. The plant species richness followed a unimodal distribution along the altitudinal gradient with the highest number of species at the intermediate altitudinal belt. The cluster analysis led to five vegetation groups: The Sideroxylon mascatense–Dodonaea viscosa group on grazed and the Olea europaea–Fingerhuthia africana group on ungrazed plateau sites at 2000 m a.s.l., the Ziziphus spina-christi–Nerium oleander group at wadi sites and the Moringa peregrina–Pteropyrum scoparium group at 1200 m a.s.l, and the Acacia gerrardii–Leucas inflata group at 1700 m a.s.l. The CVA indicated a clear distinction of the groups obtained by the agglomerative cluster analysis. The landform, altitude and grazing intensity were found to be the most important variables distinguishing between clusters. Overgrazing of the studied rangeland is an increasing environmental problem, whereas the plant composition at ungrazed sites pointed to a relatively fast and high regeneration potential of the local vegetation.     

Considerations on the seismotectonics of the Northern Apennines

The Northern Apennines have been subdivided into homogeneous zones, on the basis of recent structural evolution and crustal structure, in which the earthquake distribution can find a coherent framework. These zones, whose physiography is in strict connection with their structure, are: the Internal Peri-Tyrrhenian Belt; the External or Main Belt; the Buried Belt; and the Pede-Alpine Homocline. Earthquake activity has a tendency to cluster along well-defined bands, particularly in the easternmost border of the Peri-Tyrrhenian Belt, as well as along the zone between the External Belt and the Buried Belt, i.e. along the Padanian margin of the Northern Apennines.A minimum of seismic activity seems to be correlated with some zones of the External Belt, as well as with the Late Tertiary and Quaternary magmatic province of Tyrrhenian Southern Tuscany.The fault-plane solutions are coherent with the structural picture.A tentative seismotectonic model of the Northern Apennines is discussed.     

Sensitivity analysis of seismic hazard for Western Liguria (North Western Italy): A first attempt towards the understanding and quantification of hazard uncertainty

The use of logic trees in probabilistic seismic hazard analyses often involves a large number of branches that reflect the uncertainty in the selection of different models and in the selection of the parameter values of each model. The sensitivity analysis, as proposed by Rabinowitz and Steinberg [Rabinowitz, N., Steinberg, D.M., 1991. Seismic hazard sensitivity analysis: a multi-parameter approach. Bull. Seismol. Soc. Am. 81, 796–817], is an efficient tool that allows the construction of logic trees focusing attention on the parameters that have greater impact on the hazard.In this paper the sensitivity analysis is performed in order to identify the parameters that have the largest influence on the Western Liguria (North Western Italy) seismic hazard. The analysis is conducted for six strategic sites following the multi-parameter approach developed by Rabinowitz and Steinberg [Rabinowitz, N., Steinberg, D.M., 1991. Seismic hazard sensitivity analysis: a multi-parameter approach. Bull. Seismol. Soc. Am. 81, 796–817] and accounts for both mean hazard values and hazard values corresponding to different percentiles (e.g., 16%-ile and 84%-ile). The results are assessed in terms of the expected PGA with a 10% probability of exceedance in 50 years for rock conditions and account for both the contribution from specific source zones using the Cornell approach [Cornell, C.A., 1968. Engineering seismic risk analysis. Bull. Seismol. Soc. Am. 58, 1583–1606] and the spatially smoothed seismicity [Frankel, A., 1995. Mapping seismic hazard in the Central and Eastern United States. Seismol. Res. Lett. 66, 8–21]. The influence of different procedures for calculating seismic hazard, seismic catalogues (epicentral parameters), source zone models, frequency–magnitude parameters, maximum earthquake magnitude values and attenuation relationships is considered. As a result, the sensitivity analysis allows us to identify the parameters with higher influence on the hazard. Only these parameters should be subjected to careful discussion or further research in order to reduce the uncertainty in the hazard while those with little or no effect can be excluded from subsequent logic-tree-based seismic hazard analyses.     

In situ LA-ICPMS Isotopic and Geochronological Studies on Carbonatites and Phoscorites from the Guli Massif,Maymecha-Kotuy,Polar Siberia

In this study we present a fresh isotopic data, as well as U–Pb ages from different REE-minerals in carbonatites and phoscorites of Guli massif using in situ LA-ICPMS technique. The analyses were conducted on apatites and perovskites from calcio-carbonatite and phoscorite units, as well as on pyrochlores and baddeleyites from the carbonatites. The ⁸⁷Sr/⁸⁶Sr ratios obtained from apatites and perovskites from the phoscorites are 0.70308–0.70314 and 0.70306–0.70313, respectively; and 0.70310–0.70325 and 0.70314–0.70327, for the pyrochlores and apatites from the carbonatites, respectively.Furthermore, the in situ laser ablation analyses of apatites and perovskites from the phoscorite yield εNd from 3.6 (±1) to 5.1 (±0.5) and from 3.8 (±0.5) to 4.9 (±0.5), respectively; εNd of apatites, perovskites and pyrochlores from carbonatite ranges from 3.2 (±0.7) to 4.9 (±0.9), 3.9 (±0.6) to 4.5 (±0.8) and 3.2 (±0.4) to 4.4 (±0.8), respectively. Laser ablation analyses of baddeleyites yielded an eHf(t)d of +8.5 (± 0.18); prior to this study Hf isotopic characteristic of Guli massif was not known. Our new in situ εNd, ⁸⁷Sr/⁸⁶Sr and eHf data on minerals in the Guli carbonatites imply a depleted source with a long time integrated high Lu/Hf, Sm/Nd, Sr/Rb ratios.In situ U–Pb age determination was performed on perovskites from the carbonatites and phoscorites and also on pyrochlores and baddeleyites from carbonatites. The co-existing pyrochlores, perovskites and baddeleyites in carbonatites yielded ages of 252.3 ± 1.9, 252.5 ± 1.5 and 250.8 ± 1.4 Ma, respectively. The perovskites from the phoscorites yielded an age of 253.8 ± 1.9 Ma. The obtained age for Guli carbonatites and phoscorites lies within the range of ages previously reported for the Siberian Flood Basalts and suggest essentially synchronous emplacement with the Permian-Triassic boundary.