The effects of storms and storm-generated currents on sand beaches in Southern Maine, USA

Storms are one of the most important controls on the cycle of erosion and accretion on beaches. Current meters placed in shoreface locations of Saco Bay and Wells Embayment, ME, recorded bottom currents during the winter months of 2000 and 2001, while teams of volunteers profiled the topography of nearby beaches. Coupling offshore meteorological and beach profile data made it possible to determine the response of nine beaches in southern Maine to various oceanographic and meteorological conditions. The beaches selected for profiling ranged from pristine to completely developed and permitted further examination of the role of seawalls on the response of beaches to storms.

Current meters documented three unique types of storms: frontal passages, southwest storms, and northeast storms. In general, the current meter results indicate that frontal passages and southwest storms were responsible for bringing sediment towards the shore, while northeast storms resulted in a net movement of sediment away from the beach. During the 1999–2000 winter, there were a greater percentage of frontal passages and southwest storms, while during the 2000–2001 winter, there were more northeast storms. The sediment that was transported landward during the 1999–2000 winter was reworked into the berm along moderately and highly developed beaches during the next summer.

A northeast storm on March 5–6, 2001, resulted in currents in excess of 1 m s⁻¹ and wave heights that reached six meters. The storm persisted over 10 high tides and caused coastal flooding and property damage. Topographic profiles made before and after the storm demonstrate that developed beaches experienced a loss of sediment volume during the storm, while sediment was redistributed along the profile on moderately developed and undeveloped beaches. Two months after the storm, the profiles along the developed beaches had not reached their pre-storm elevation. In comparison, the moderately developed and undeveloped beaches reached and exceeded their pre-storm elevation and began to show berm buildup characteristic of the summer months.     

Mobilized side and tip resistances of piles in clay

This paper presents a procedure to assess the mobilized pile side and tip resistance versus pile head and tip settlement under axial load in clay soil. The load transfer (t–z) curve is evaluated at any point on the loaded pile based on the combined pile tip/side resistance–displacement mechanisms along the length of the pile. Unlike current methods that assume the pile settlements as a percentage of the pile/shaft diameter, the presented technique determines the side and tip resistance of the pile and the associated pile settlement under existing load based on the current stress/strain level in the surrounding soil up to failure (excessive settlement). The technique employs the concepts of the elastic theory and Ramberg–Osgood characterization of the stress–strain behavior of the clay soil. Case studies are also presented to exhibit the capabilities of the proposed procedure. The good agreement between measured and calculated load transfer curves along the pile and pile tip resistance versus pile head, side, and tip displacements shows the consistency of the proposed procedure. A computer code is developed to employ the presented technique.     

Doing community geography

Community Geography offers researchers, community groups, and students opportunities to engage in action oriented applied geographical research. Creating and sustaining these research programs can be challenging, programs can involve many partners from both academic and the community, have different goals and purposes, and utilize a variety of methods to perform research. In this paper we offer a framework of three primary overarching principles for implementing CG projects; (1) Who, (2) Why, and (3) How. (1) “Who” describes who is involved in CG, including researchers, community partners, academic institutions, (2) “Why” describes the justifications and benefits of taking this approach. (3) “How” explains how CG borrows methodologies from many disciplines within geography and beyond. Our examples are not exhaustive; rather, they serve as starting points to inspire researchers interested in CG.

     

GIS derived synthetic rating curves and HAND model to support on-the-fly flood mapping

Natural Hazards - Acknowledging the devastating consequences of past earthquakes, current research efforts focus on the development of tools for assessing and controlling the risk and losses...     

Titan solar occultation observed by Cassini/VIMS: Gas absorption and constraints on aerosol composition

A solar occultation by Titan's atmosphere has been observed through the solar port of the Cassini/VIMS instrument on January 15th, 2006. Transmission spectra acquired during solar egress probe the atmosphere in the altitude range 70 to 900 km at the latitude of 71° S. Several molecular absorption bands of CH₄ and CO are visible in these data. A line-by-line radiative transfer calculation in spherical geometry is used to model three methane bands (1.7, 2.3, 3.3 μm) and the CO 4.7 μm band. Above 200 km, the methane 2.3 μm band is well fit with constant mixing ratio between 1.4 and 1.7%, in agreement with in situ and other Cassini measurements. Under 200 km, there are discrepancies between models and observations that are yet fully understood. Under 480 km, the 3.3 μm CH₄ band is mixed with a large and deep additional absorption. It corresponds to the C-H stretching mode of aliphatic hydrocarbon chains attached to large organic molecules. The CO 4.7 μm band is observed in the lower stratosphere (altitudes below 150 km) and is well fit with a model with constant mixing ratio of 33±10 ppm. The continuum level of the observed transmission spectra provides new constraints on the aerosol content of the atmosphere. A model using fractal aggregates and optical properties of tholins produced by Khare et al. [Khare, B.N., Sagan, C., Arakawa, E.T., Suits, F., Callcott, T.A., Williams, M.W., 1984. Icarus 60, 127-137] is developed. Fractal aggregates with more than 1000 spheres of radius 0.05 μm are needed to fit the data. Clear differences in the chemical composition are revealed between tholins and actual haze particles. Extinction and density profiles are also retrieved using an inversion of the continuum values. An exponential increase of the haze number density is observed under 420 km with a typical scale height of 60 km.     

The geology of Hotei Regio, Titan: Correlation of Cassini VIMS and RADAR

Joint Cassini VIMS and RADAR SAR data of ∼700-km-wide Hotei Regio reveal a rich collection of geological features that correlate between the two sets of images. The degree of correlation is greater than anywhere else seen on Titan. Central to Hotei Regio is a basin filled with cryovolcanic flows that are anomalously bright in VIMS data (in particular at 5 μm) and quite variable in roughness in SAR. The edges of the flows are dark in SAR data and appear to overrun a VIMS-bright substrate. SAR-stereo topography shows the flows to be viscous, 100-200 m thick. On its southern edge the basin is ringed by higher (∼1 km) mountainous terrain. The mountains show mixed texture in SAR data: some regions are extremely rough, exhibit low and spectrally neutral albedo in VIMS data and may be partly coated with darker hydrocarbons. Around the southern margin of Hotei Regio, the SAR image shows several large, dendritic, radar-bright channels that flow down from the mountainous terrain and terminate in dark blue patches, seen in VIMS images, whose infrared color is consistent with enrichment in water ice. The patches are in depressions that we interpret to be filled with fluvial deposits eroded and transported by liquid methane in the channels. In the VIMS images the dark blue patches are encased in a latticework of lighter bands that we suggest to demark a set of circumferential and radial fault systems bounding structural depressions. Conceivably the circular features are tectonic structures that are remnant from an ancient impact structure. We suggest that impact-generated structures may have simply served as zones of weakness; no direct causal connection, such as impact-induced volcanism, is implied. We also speculate that two large dark features lying on the northern margin of Hotei Regio could be calderas. In summary the preservation of such a broad suite of VIMS infrared color variations and the detailed correlation with features in the SAR image and SAR topography evidence a complex set of geological processes (pluvial, fluvial, tectonic, cryovolcanic, impact) that have likely remained active up to very recent geological time (<10⁴ year). That the cryovolcanic flows are excessively bright in the infrared, particularly at 5 μm, might signal ongoing geological activity. One study [Nelson, R.M., and 28 colleagues, 2009. Icarus 199, 429-441] reported significant 2-μm albedo changes in VIMS data for Hotei Arcus acquired between 2004 and 2006, that were interpreted as evidence for such activity. However in our review of that work, we do not agree that such evidence has yet been found.     

Analysis of a cryolava flow-like feature on Titan

This paper reports on the analysis of the highest spatial resolution hyperspectral images acquired by the Visual and Infrared Mapping Spectrometer (VIMS) onboard the Cassini spacecraft during its prime mission. A bright area matches a flow-like feature coming out of a caldera-like feature observed in Synthetic Aperture Radar (SAR) data recorded by the Cassini radar experiment [Lopes et al., 2007. Cryovolcanic features on Titan's surface as revealed by the Cassini Titan Radar Mapper. Icarus 186, 395-412, doi:10.1016/j.icarus.2006.09.006]. In this SAR image, the flow extends about 160 km east of the caldera. The contrast in brightness between the flow and the surroundings progressively vanishes, suggesting alteration or evolution of the composition of the cryolava during the lifetime of the eruptions. Dunes seem to cover part of this flow on its eastern end. We analyze the different terrains using the Spectral Mixing Analysis (SMA) approach of the Multiple-Endmember Linear Unmixing Model (MELSUM, Combe et al., 2008). The study area can be fully modeled by using only two types of terrains. Then, the VIMS spectra are compared with laboratory spectra of known materials in the relevant atmospheric windows (from 1 to 2.78 μm). We considered simple molecules that could be produced during cryovolcanic events, including H₂O, CO₂ (using two different grain sizes), CH₄ and NH₃. We find that the mean spectrum of the cryoflow-like feature is not consistent with pure water ice. It can be best fitted by linear combinations of spectra of the candidate materials, showing that its composition is compatible with a mixture of H₂O, CH₄ and CO_2.