葫芦岛地区道路网络的建立

本文针对城市交通道路网的特点,根据现实的交通网络,对葫芦岛地区道路网络进行建立及分析。利用ArcGIS中的Geodatabase构建路网数据库,利用节点一弧段数据结构构建空间网络拓扑关系,生成点一弧矢量数据模型表示的道路网络。并实现四种网络分析功能:最佳路径分析、空间查询、追踪分析和缓冲区分析。     

基于DEM的SAR图像模拟

首先阐述了研究基于数字高程模型(DEM)的SAR图像模拟的重要性。然后针对SAR图像的几何特点,并顾及地面坡度、成像距离等因素对雷达波后向散射强度的影响,设计了基于强度积分的SAR图像模拟方案。根据Leberl构像模型计算SAR图像的像点坐标,采用强度积分策略对各点处的强度进行模拟,并进行归一化处理。通过仿真实验得到了满意的SAR模拟图像,验证了该模拟方案的正确性和有效性。     

多视处理对SAR船只探测的影响

合成孔径雷达(Synthetic Aperture Radar, SAR)成像过程中会出现斑点噪声,一般用多视处理减少图像的斑点噪声,这对合成孔径雷达船只探测造成了一定的影响.本文对不同视数SAR图像的等效视数、空间分辨率和船只海面对比度进行了分析,结果表明:一方面,多视处理增加了等效视数,改善了图像质量,更有利于船只探测;但另一方面,多视处理又降低了图像空间分辨率和船只海面对比度,对船只探测产生不利影响.最后本文选取了窗口滤波法和K分布法两种典型的SAR船只探测方法对多视处理的SIR-C SAR图像进行了船只探测试验,得到了最适合船只探测的多视处理的视数.     

GPS单频精密单点定位方法与实践

讨论了单频精密单点定位的解算方法与思路,编写了单频精密动态单点定位的程序,实现了事后动态单频精密单点定位.     

Geochemistry and environmental effect of cadmium in the super-large Jinding Pb-Zn deposit,Yunnan Province,China

The Jinding Pb-Zn deposit in Yunnan Province is the representative of a Cd-enriched area and mining activities lead to the release of Cd into the hypergenic ecosystem, resulting in Cd pollution. The concentrations of Cd vary greatly from one type to another type of rocks in the mining district. In the host rock, Cd concentrations range from 50×10^-6 to 650×10^-6 with an average of 310×10^-6. In primary ores, Cd concentrations range from 14×10^-6 to 2800×10^-6 with an average of 767×10^-6. However, in oxidized ores, Cd concentrations are highest, varying within the range of 110×10^-6 to 8200×10^-6 , averaging 1661×10^-6. It is shown that the oxidized ores are the main carder and environmental source of Cd. Leaching test showed that Pb/Zn ores are easy to oxidize and thereafter release Cd and other harmful elements. These leached elements in the leachate may be precipitated rapidly in the order of Zn〉Pb〉Cd. As for the concentration distribution of Cd in the Bijiang River, it is estimated to be 15.7 μg/L Cd in water, 49.3 mg/L in suspended substances, and 203.7 mg/L in sediments. The average value of Cd in soil from the polluted area is 83.0 mg/kg. Natural weathering of Cd-rich rocks and minerals imposes a potential environmental risk on the aquatic ecosystem of the Bijiang catchment.     

Jurassic Tectonics of North China: A Synthetic View

This paper gives a synthetic view on the Jurassic tectonics of North China, with an attempt to propose a framework for the stepwise tectonic evolution history. Jurassic sedimentation, deformation and magmatism in North China have been divided into three stages. The earliest Jurassic is marked by a period of magmatism quiescence （in 205-190 Ma） and regional uplift, which are considered to be the continuation of the “Indosinian movement” characterized by continent-continent collision between the North and South China blocks. The Early to Middle Jurassic （in 190-170 Ma） was predominated by weak lithospheric extension expressed by mantle-derived plutonism and volcanism along the Yanshan belt and alongside the Tan-Lu fault zone, normal faulting and graben formation along the Yinshan- Yanshan tectonic belt, depression and resuming of coal-bearing sedimentation in vast regions of the North China block （NCB）. The Middle to Late Jurassic stage started at 165y.5 Ma and ended up before 136 Ma; it was dominated by intensive intraplate deformation resulting from multi-directional compressions. Two major deformation events have been identified. One is marked by stratigraphic unconformity beneath the thick Upper Jurassic molasic series in the foreland zones of the western Ordos thrust-fold belt and along the Yinshan-Yanshan belt; it was predated 160 Ma. The other one is indicated by stratigraphic unconformity at the base of the Lower Cretaceous and predated 135 Ma. During this last stage, two latitudinal tectonic belts, the Yinshan-Yanshan belt in the north and the Qinling-Dabie belt in the south, and the western margin of the Ordos basin were all activated by thrusting; the NCB itself was deformed by the NE to NNE-trending structural system involving thrusting, associated folding and sinistral strike-slip faulting, which were spatially partitioned. Foliated S-type granitic plutons aged 160-150 Ma were massively emplaced in the Jiao-Liao massif east of the Tan-Lu fault zone and indicate important crustal thicken     

福建建阳大金山铅锌矿床地球物理化学异常特征

大金山铅锌矿位于泰宁一政和北东东向铜多金属成矿带上,是该成矿带主要的矿种之一,也是闽北地区一个较有价值的矿床。矿床产于早元古代南山组上段,受燕山期北东东向构造控制,属中低温热液充填交代型矿床。     

广西佛子冲铅锌矿田成岩成矿时代研究

广西佛子冲铅锌矿田位于桂东南博白-岑溪多金属成矿带的NE端,区内发育燕山期花岗岩、花岗闪长岩、二长花岗斑岩和英安质凝灰熔岩等;其中花岗闪长岩和二长花岗斑岩与铅锌成矿关系密切,成矿岩体形成时代分别为156Ma和127Ma。     

结合GPS/Leveling和正高改正确定GPS常年观测站正高

利用精密几何水准测量结合GPS/Leveling方法计算韩国行政自治部管辖内30所GPS常年观测站天线基准点的正高。并联合进行对水准点和GPS常年观测站偏心点的重力测量,使用正高改正方法计算出其改正量,提高正高的精确度。     

地铁隧道结构变形监测信息管理系统的开发

地铁隧道结构变形监测的特殊性、周期性和长期性,使其信息量非常庞大.信息管理是地铁隧道结构变形监测中一项重要的工作,现有的管理方式效率很低.为了高效、准确地管理监测信息,及时分析预报地铁隧道结构的稳定状况,本文结合南京地铁运营期隧道结构变形监测实例,开发了一套具有变形监测资料存储、预处理、管理分析、可视化分析、预测预报及限值预警等功能的信息管理系统,保证了准确及时快速的数据处理和信息反馈,具有良好的运用和推广前景.