多视处理对SAR船只探测的影响

合成孔径雷达(Synthetic Aperture Radar, SAR)成像过程中会出现斑点噪声,一般用多视处理减少图像的斑点噪声,这对合成孔径雷达船只探测造成了一定的影响.本文对不同视数SAR图像的等效视数、空间分辨率和船只海面对比度进行了分析,结果表明:一方面,多视处理增加了等效视数,改善了图像质量,更有利于船只探测;但另一方面,多视处理又降低了图像空间分辨率和船只海面对比度,对船只探测产生不利影响.最后本文选取了窗口滤波法和K分布法两种典型的SAR船只探测方法对多视处理的SIR-C SAR图像进行了船只探测试验,得到了最适合船只探测的多视处理的视数.     

GPS单频精密单点定位方法与实践

讨论了单频精密单点定位的解算方法与思路,编写了单频精密动态单点定位的程序,实现了事后动态单频精密单点定位.     

Geochemistry and environmental effect of cadmium in the super-large Jinding Pb-Zn deposit,Yunnan Province,China

The Jinding Pb-Zn deposit in Yunnan Province is the representative of a Cd-enriched area and mining activities lead to the release of Cd into the hypergenic ecosystem, resulting in Cd pollution. The concentrations of Cd vary greatly from one type to another type of rocks in the mining district. In the host rock, Cd concentrations range from 50×10^-6 to 650×10^-6 with an average of 310×10^-6. In primary ores, Cd concentrations range from 14×10^-6 to 2800×10^-6 with an average of 767×10^-6. However, in oxidized ores, Cd concentrations are highest, varying within the range of 110×10^-6 to 8200×10^-6 , averaging 1661×10^-6. It is shown that the oxidized ores are the main carder and environmental source of Cd. Leaching test showed that Pb/Zn ores are easy to oxidize and thereafter release Cd and other harmful elements. These leached elements in the leachate may be precipitated rapidly in the order of Zn〉Pb〉Cd. As for the concentration distribution of Cd in the Bijiang River, it is estimated to be 15.7 μg/L Cd in water, 49.3 mg/L in suspended substances, and 203.7 mg/L in sediments. The average value of Cd in soil from the polluted area is 83.0 mg/kg. Natural weathering of Cd-rich rocks and minerals imposes a potential environmental risk on the aquatic ecosystem of the Bijiang catchment.     

福建建阳大金山铅锌矿床地球物理化学异常特征

大金山铅锌矿位于泰宁一政和北东东向铜多金属成矿带上,是该成矿带主要的矿种之一,也是闽北地区一个较有价值的矿床。矿床产于早元古代南山组上段,受燕山期北东东向构造控制,属中低温热液充填交代型矿床。     

广西佛子冲铅锌矿田成岩成矿时代研究

广西佛子冲铅锌矿田位于桂东南博白-岑溪多金属成矿带的NE端,区内发育燕山期花岗岩、花岗闪长岩、二长花岗斑岩和英安质凝灰熔岩等;其中花岗闪长岩和二长花岗斑岩与铅锌成矿关系密切,成矿岩体形成时代分别为156Ma和127Ma。     

结合GPS/Leveling和正高改正确定GPS常年观测站正高

利用精密几何水准测量结合GPS/Leveling方法计算韩国行政自治部管辖内30所GPS常年观测站天线基准点的正高。并联合进行对水准点和GPS常年观测站偏心点的重力测量,使用正高改正方法计算出其改正量,提高正高的精确度。     

Pumping decisions for sustainable development of groundwater resources in areas of grassland degradation: a case study in Lanqi Banner, Inner Mongolia, China

The best planting alternatives for satisfying high water use demands of forage and fodder crops in a region of Inner Mongolia, China, were determined by a multiobjective distributed-parameter groundwater management model. These alternatives took account of different cropping patterns and pumping decisions associated with both temporal and spatial aspects of water allocation. The model was developed for phreatic, homogenous, and isotropic aquifers using the response matrix technique of quadratic programming theory and, in this case, using the alternative direction implicit (ADI) scheme. Model solutions using effective rainfall with a probability of 50%, show that average water table drawdown in the planning period (2006–2017) is 0.22 m and the groundwater fluctuation in each pumping well is very low. In order to evaluate the pumping decisions under an effective rainfall with a probability of 75%, a sensitive analysis was also conducted. Analysis shows that it is useful to apply the results from the proposed model to control the landscape degradation due to overgrazing and overpumping activities.     

鄂尔多斯盆地靖边气田马五_(1+2)气藏储集单元研究

综合地震、地质、测井等信息,考虑沉积、成岩、地貌、生产动态等多因素,在沟槽识别和致密带研究基础上,通过井间干扰、油层压力变化和试井边界响应分析,按照局部、就近原则对靖边气田马五1+2气藏进行了储集单元划分。共划分出111个储集单元,其中独立型69个,复合型42个。这些储集单元的面积多介于10～50km2之间,单个储集单元的井数一般少于6口。在对气藏储层特征综合认识的基础上,确定流动单元划分思路与流程,并认为关键环节包括古沟槽识别、致密带研究、动静结合确定储集单元等3个方面。储集单元一方面受控于被致密岩相包围的有利成岩相带,宏观上与弱—中等充填泥粉晶白云岩相对应性好;另一方面又受各级古沟槽夹持,在两个一级古沟槽之间往往共生多个储集单元,而这些储集单元边界又严格地受二级或三级沟槽切割控制。     

上海市长江口及邻近海域地质调查现状及展望

海洋区域地质调查近年来逐渐得到重视,海洋地质调查技术的发展也为开展海洋区域地质调查奠定了基础。上海地区社会经济发展对地质工作的需求,为摸清上海市长江口及邻近海域的地质现状提出了必然要求。本文在系统整理长江口及邻近海域地质资料的基础上,重点分析了区内存在的重点地质问题和研究存在的问题,根据海洋地质调查的技术发展,结合国内相关地区的调查经验,对长江口及邻近海域内区域地质调查进行了展望,提出了采用综合物探技术、地质取样和测试分析进行综合地质环境调查的建议,并对具体采用的调查技术和调查内容进行了论述。     

Using Sequential Self-Calibration Method to Identify Conductivity Distribution: Conditioning on Tracer Test data

An iterative inverse method, the sequential self-calibration method, is developed for mapping spatial distribution of a hydraulic conductivity field by conditioning on nonreactive tracer breakthrough curves. A streamline-based, semi-analytical simulator is adopted to simulate solute transport in a heterogeneous aquifer. The simulation is used as the forward modeling step. In this study, the hydraulic conductivity is assumed to be a deterministic or random variable. Within the framework of the streamline-based simulator, the efficient semi-analytical method is used to calculate sensitivity coefficients of the solute concentration with respect to the hydraulic conductivity variation. The calculated sensitivities account for spatial correlations between the solute concentration and parameters. The performance of the inverse method is assessed by two synthetic tracer tests conducted in an aquifer with a distinct spatial pattern of heterogeneity. The study results indicate that the developed iterative inverse method is able to identify and reproduce the large-scale heterogeneity pattern of the aquifer given appropriate observation wells in these synthetic cases.