A recursive decomposition algorithm for network seismic reliability evaluation

A new probabilistic analytical approach to evaluate seismic system reliability of large lifeline systems is presented in this paper. The algorithm takes the shortest path from the source to the terminal of a node weight or edge weight network as decomposition policy, using the Boolean laws of set operation and probabilistic operation principal, a recursive decomposition process then could be constructed. For a general weight network, the modified Torrieri method (NTR/T method) is introduced to combine with the suggested algorithm. Therefore, the recursive decomposition algorithm may be applied to evaluate the seismic reliability of general lifeline systems. A series of case studies, including a practical district electric power network system and a large urban water supply system, show that the suggested algorithm supplies a useful probabilistic analysis means for the seismic reliability evaluation of large lifeline systems. Copyright © 2002 John Wiley & Sons, Ltd.     

与全球变化有关的几个北极海洋地质问题

极地区域是全球变化研究的重点区域 ,在北极地区与全球变化有关的地质问题主要是北极地区的海陆变化对全球变化的影响 ,以及全球变化在地层中的记录。这涉及到北极形态变化及与其它大洋沟通的水道开闭情况 ,地形起伏对大气、大洋环流的影响 ,地壳升降与海平面变化对河流流量和海岸稳定性的影响 ,气体水合物及有机碳等变化对全球碳循环的影响 ,以及这些影响与气候变化信息在极地沉积物中的记录。文章在对上述影响及海洋地质研究状况进行探讨后 ,又简要介绍了中国的首次北极考察海洋地质研究状况     

湘中锑(金)矿床成矿物质来源——Ⅰ.微量元素及其实验地球化学证据

为了查明湘中盆地中-低温梯（金）矿床的成矿物质来源，文章应用高分辨率ICP-MS、ICP-AES等方法对岩石与矿石进行了系统测定，并结合作者以往分析数据和实验地球化学结果，对该区盆地及周边基底地层与矿床中的微量元素分布特征及其水/岩反应效应进行了综合分析和系统研究。结果表明：Sb、Au等成矿元素在元古界基底碎屑岩中具有高的背景含量，在近似成矿条件下的水/岩反应实验中，成矿元素的淋出率达20%～90%，元古界基底碎屑岩中的金（锑、钨）矿床的周围蚀变围岩中出现明显的金负异常区。而盆地内泥盆系统地层中的高锑含量仅局限于锑矿床（化）及其蚀变围岩中；湘中锑（金）矿床中的矿石与基底碎屑岩具有相似的稀土元素球粒陨石标准化配分曲线特征，以上微量元素地球化学特征充分证明该区锑（金）矿床锑、金等成矿物质主要来源于元古界底碎屑岩。     

老柞山金矿田鸡爪沟金矿床地质特征及成因探讨

分析了鸡爪沟金矿床地质特征和成因 ,并对形成过程进行理论推导 ,认为该矿床为与火山作用有关的中温岩浆热液充填型矿床。     

四川石棉县首次发现独特的自然铂矿床

攀西地区大片前震旦纪结晶基底杂岩中产出有众多的前晋宁期层状侵入体，其间可见钒钛磁铁矿化，铬铁矿化，最近在石棉境内新发现一处含铂矿化体呈层状，网脉状产于层状侵入体中，且多以自然铂单矿物存在。伴生主要矿物为磁铁矿，钛铁矿，黄铁矿，黄铜矿等。初步认为该矿床类型属产于层状铁质基性-超基性岩与铜硫化物-钡钛磁铁矿有关的构造-热液再活化型自然铂矿床。     

^40Ar／^39Ar Fast Neutron Activation Ages of Quartz from the Jinman Vein Copper Dposit in Western Yunnan and Their Significance

Quartz samples collected from the Jinman vein copper deposit in the Lanping Basin of western Yunnan were determined by⁴⁰Ar/³⁹Ar fast neutron activation techniques, and the spectra are characterized as being saddle-shaped. The samples yielded a plateau age of 58.05 ± 0.54 Ma, a minimum appearance age of 56.76 ±0.81 Ma and an isochron age of 54.30 ± 0.15 Ma, the three ages being close to each other, indicating that the ages of the quartz samples so far determined are true and reliable. The plateau age represents the time of formation of Cu-bearing quartz veins, which is corresponding to Early Himalayan. This age is also consistent with the time at which a tectonically thermal event (60 Ma) took place within the Lanping Basin, Yunnan Province. In consideration of the fact that copper ore and other ore types in the vast area of western Yunnan are concentrated mainly in the Early Himalayan strata, the authors believe that there must have existed some indispensable key factors leading to metallogenesis on a large scale during the Early Himalayan period in western Yunnan and also constraining in union the formation of ore deposits there.     

Heat flow and thermal modeling of the Yinggehai Basin, South China Sea

Geothermal gradients are estimated to vary from 31 to 43 °C/km in the Yinggehai Basin based on 99 temperature data sets compiled from oil well data. Thirty-seven thermal conductivity measurements on core samples were made and the effects of porosity and water saturation were corrected. Thermal conductivities of mudstone and sandstone range from 1.2 to 2.7 W/m K, with a mean of 2.0±0.5 W/m K after approximate correction. Heat flow at six sites in the Yinggehai Basin range from 69 to 86 mW/m², with a mean value of 79±7 mW/m². Thick sediments and high sedimentation rates resulted in a considerable radiogenic contribution, but also depressed the heat flow. Measurements indicate the radiogenic heat production in the sediment is 1.28 μW/m³, which contributes 20% to the surface heat flow. After subtracting radiogenic heat contribution of the sediment, and sedimentation correction, the average basal heat flow from basement is about 86 mW/m².Three stages of extension are recognized in the subsidence history, and a kinematic model is used to study the thermal evolution of the basin since the Cenozoic era. Model results show that the peak value of basal heat flow was getting higher and higher through the Cenozoic. The maximum basal heat flow increased from 65 mW/m² in the first stage to 75 mW/m² in the second stage, and then 90 mW/m² in the third stage. The present temperature field of the lithosphere of the Yinggehai Basin, which is still transient, is the result of the multistage extension, but was primarily associated with the Pliocene extension.     

Numerical Calculation of Equivalent Cell Permeability Tensors for General Quadrilateral Control Volumes

A new method for upscaling fine scale permeability fields to general quadrilateral-shaped coarse cells is presented. The procedure, referred to as the conforming scale up method, applies a triangle-based finite element technique, capable of accurately resolving both the coarse cell geometry and the subgrid heterogeneity, to the solution of the local fine scale problem. An appropriate averaging of this solution provides the equivalent permeability tensor for the coarse scale quadrilateral cell. The general level of accuracy of the technique is demonstrated through application to a number of flow problems. The real strength of the conforming scale up method is demonstrated when the method is applied in conjunction with a flow-based gridding technique. In this case, the approach is shown to provide results that are significantly more accurate than those obtained using standard techniques.     

岩浆混合作用——来自甘肃北山的野外证据

在 1∶2 5万马鬃山幅区调填图和方法研究工作中 ,通过观察到的一些与岩浆混合模式相关的现象 ,指出暗色微粒镁铁质包体是岩浆混合作用的有利证据 ,讨论了与花岗岩侵入体相关的镁铁质小岩体混合成因的可能性 ,认为岩浆混合作用在造山带岩浆活动中是一种极为普遍的现象。     

四川省房屋建筑易损性研究

研究房屋建筑易损性特征是防震减灾工作必不可少的环节之一，本文通过对多年工作的系统总结，得出四川省不同地区的房屋建筑易损性矩阵，全省房屋建筑抗震性能总体水平不高，这是造成地震灾害加重的主要原因之一，随着经济发展实力的提高，适当提高全省房屋建筑抗震设防水平可大大减轻特别是中强地震所造成的经济损失。