Effect of wellbore storage and finite thickness skin on flow to a partially penetrating well in a phreatic aquifer

An analytical model is presented for the analysis of constant flux tests conducted in a phreatic aquifer having a partially penetrating well with a finite thickness skin. The solution is derived in the Laplace transform domain for the drawdown in the pumping well, skin and formation regions. The time-domain solution in terms of the aquifer drawdown is then obtained from the numerical inversion of the Laplace transform and presented as dimensionless drawdown–time curves. The derived solution is used to investigate the effects of the hydraulic conductivity contrast between the skin and formation, in addition to wellbore storage, skin thickness, delayed yield, partial penetration and distance to the observation well. The results of the developed solution were compared with those from an existing solution for the case of an infinitesimally thin skin. The latter solution can never approximate that for the developed finite skin. Dimensionless drawdown–time curves were compared with the other published results for a confined aquifer. Positive skin effects are reflected in the early time and disappear in the intermediate and late time aquifer responses. But in the case of negative skin this is reversed and the negative skin also tends to disguise the wellbore storage effect. A thick negative skin lowers the overall drawdown in the aquifer and leads to more persistent delayed drainage. Partial penetration increases the drawdown in the case of a positive skin; however its effect is masked by the negative skin. The influence of a negative skin is pronounced over a broad range of radial distances. At distant observation points the influence of a positive skin is too small to be reflected in early and intermediate time pumping test data and consequently the type curve takes its asymptotic form.     

Environmental impact assessment on water quality deterioration caused by the decreased Ganges outflow and saline water intrusion in south-western Bangladesh

 This paper deals with an environmental impact assessment of low water flow in the river Ganges during a dry period at the Khulna and Mongla port areas in south-western Bangladesh. Large-scale surface water withdrawal in India after commissioning the Farakka Barrage causes a drastic fall in the Ganges low-flow condition within the Bangladesh territory during every dry period. The average lowest discharge in the Ganges is 552 m³/s, which is about 73% less than that in the pre-Farakka time. This has caused the deterioration of both surface and groundwater quality of the study area. Salinity is the principal cause of water quality degradation in the area. Present observation shows that the surface water of the area is sulphate-chloride dominated, which signifies high salinity whereas the groundwater is categorized as of medium to high salinity. To maintain the Rupsa River's maximum salinity below 1000 μS/cm the discharge in the Ganges should be ∼1500 m³/s, whereas that at Garai basin is ∼10 m³/s. If this present situation continues it will be a crippling blow to the environment of the area in the long term. An integrated multidisciplinary approach to hydrogeological research is urgently required to salvage the area from further deterioration. Received: 9 August 1999 · Accepted: 8 March 2000     

Mineralogy and physico-chemical properties of Wadi Badaa clays (Cairo-Suez district,Egypt): a prospective resource for the ceramics industry

The Wadi Badaa (WB) Upper Miocene clays, Cairo-Suez district, Egypt, represent materials for the ceramic production. The clay raw materials are composed mainly of smectite and kaolinite with minor quartz, calcite, and rare feldspar. The plasticity indices vary between 24 and 30%, suggesting that these clays are plastic raw materials. IR bands of the investigated clays were observed at 3695, 3619, 1032, 916, 794, 690, 534, 466, and 423 cm^?1 for kaolinite; at 3436, 1635, 916, and 466 cm^?1 for smectite; and at 1179, 1104, 794, 690, and 466 cm^?1 for quartz. The <2 μm particle sizes of samples are relatively abundant in clays (～33%), which is adequate for uses of the ceramic products because of containing fine particle sizes. The studied WB clays contain 7.95 and 12.35% moisture water and interlayer water, respectively, with a maximum drying shrinkage of 7.87% at room temperature; therefore, the WB clays could be used in the ceramic manufacture.     

Removal of copper ions from aqueous solution using silica derived from rice straw: comparison with activated charcoal

The batch removal of copper(II) ions from aqueous solution under different experimental conditions using alkali-leached silica and activated charcoal was investigated in this study. The copper(II) uptake was dependent on varying time, pH, copper concentration and temperature. Copper sorption was found fast reaching equilibrium within 1 h with better performance for alkali-leached silica than charcoal. Copper sorption was low at low pH values and increased with rise in initial pH-value until 6.7. Sorption fits well the Langmuir and Freundlich equations with higher uptake by increasing temperature. According to Langmuir equation, the maximum uptake of Cu(II) ions by alkali-leached SiO₂ and charcoal was found to be 242.5 and 94.4 mmol/g at temperature 60 °C and pH 6. Thermodynamic studies confirm that the process was spontaneous and endothermic nature. Kinetic data for Cu(II) sorption was found to follow pseudo-second-order model.     

Rock composition and origin of the Duwi Formation calcareous rocks, Upper Egypt

Upper Cretaceous phosphorite beds of the Duwi Formation, Upper Egypt, are intercalated with limestone, sandy limestone, marl, calcareous shales, and calcareous sandstone. Calcareous intercalations were subjected to field and detailed petrographic, mineralogical and geochemical investigations in order to constrain their rock composition and origin. Mineralogically, dolomite, calcite, quartz, francolite and feldspars are the non-clay minerals. Smectite, kaolinite and illite represent the clay minerals. Major and trace elements can be classified as the detrital and carbonate fractions based on their sources. The detrital fraction includes the elements that are derived from detrital sources, mainly clay minerals and quartz, such as Si, Al, Fe, Ti, K, Ba, V, Ni, Co, Cr, Zn, Cu, Zr, and Mo. The carbonate fraction includes the elements that are derived from carbonates, maily calcite and dolomite, such as Ca, Mg and Sr. Dolomite occurs as being dense, uniform, mosaic, very fine-to-fine, non-ferroan, and non-stoichiometrical, suggesting its early diagenetic formation in a near-shore oxidizing shallow marine environment. The close association and positive correlation between dolomite and smectite indicates the role of clay minerals in the formation of dolomite as a source of Mg^2＋ -rich solutions. Calcareous rocks were deposited in marine, oxidizing and weakly alkaline conditions, marking a semi-arid climatic period. The calcareous/argillaceous alternations are due to oscillations in clay/carbonate ratio.     

Mineralogy, geochemistry, and origin of felsic dike swarms in Aqaba complex (Wadi Al-Yutum), South Jordan

The present work deals with the geologic setting and mineralogical and geochemical study of Late Precambrian magmatic rocks especially the felsic dike swarms of northeast Aqaba complex in South Jordan. The northeast Aqaba complex represents one of the most significant regions in the South Jordan basement. The basement rocks in the studied region are composed of schists, gneisses, migmatites, met gabbros, diorite, and granite. It is invaded by post-orogenic dike swarms. The post-orogenic dike swarms have been recognized as felsic dikes of dacite, rhyodacite, and rhyolite composition. They are composed of plagioclase, K-feldspar, quartz, biotite, and hornblenble with a porphyritic texture. Chemically, they are enriched in compatible elements especially in the large ion lithophile elements such as K, Rb, and Ba. The values of A/NK are more than A/CNK, indicating that dacitic dike swarms have metaluminous nature. Meanwhile, the values of A/NK are less than A/CNK in rhyodacitic and rhyolitic dike swarms of prealuminous nature. This felsic dike can be related to an intercontinental setting that was accompanied by a chemical evolution of the extensional movements and is formed by partial melting of crustal rocks, which are already known from other areas in the northeast portion of the Arabian-Nubian Shield.     

Distribution and Influence of Iron Phases the Physico—Chemical Properties of Phyllosilicates

Clay minerals from different Cretaceous stratigraphic successions of Egypt were investigated using XRD,DTA,dissolution analysis(DCB),IR,Moessbauer and X-ray Electron Spin Resonance(ESR) spectroscopes.The purity of the samples and the degree of their structural order were determined by XRD.The location of Fe in the octahedral sheet is characterized by absorption bands at-875cm^-1 assigned as Al-OH-Fe which persist after chemical dissolution of free iron.The Moessbauer spectra of these clays show two doublets with isomer shift and quadrupole splitting typical of octahedrally coordinated Fe^3 ,in addition to third doublet with hyperfine parameter typical of Fe^2 in the spectra of Abu-Had kaolinite (H) sample.Six-lines magnetic hyperfine components which are consistent with those of hematite are confirmed in the spectra of both Isel and Rish kaolinite samples.Goethite was confirmed by both IR and DTA.Multiple nature of ESR of these clays suggested structural Fe in distorted octahedral symmetry as well as non-structural Fe.Little dispersion and low swelling indices as well as incomplete activation of the investigated montmorillonite samplas by NaCO3 appear to be due to incomplete disaggregation of montmorillonite particles.This can be explained by the ability of Fe-gel to aggregate the montmorillonite into pseudo-particles and retard the rigid-gel structure.However,extraction of this ferric amorphous compound by dithonite treatment recovers the surface properties of the montmorillonite samples.On the other hand,the amount and site occupation of Fe associated with kaolinite samples show an inverse correlation with the parameters used to describe the degree of crystallinity perfection,color,brightness and vitrification range of these kaolinite samples.     

Shigar valley gemstones,their chemical composition and origin,Skardu, Gilgit-Baltistan,Pakistan

A variety of gemstones is being mined in the Shigar valley, Skardu, Pakistan. These include beryl (goshenite and aquamarine), tourmaline (schorl), garnet (almandine–spessartine), apatite, topaz, fluorite, zoisite, clinozoisite, and axinite, mostly occurring in complex or zoned pegmatites and metamorphic rocks. These have been analyzed using electron probe micro-analyzer and X-ray diffractometer. The mineral chemistry of each gemstone is similar to its respective typical gemstone variety with homogenous chemical composition. Field and chemical characteristics suggest that beryl, tourmaline, garnet, apatite, topaz, and fluorite are occurring in zoned pegmatites which are largely formed by magmatic hydrothermal fluids in the cavities and vugs within the intermediate zone. However, zoisite, clinozoisite, and axinite may have a metamorphic and/or metasomatic origin.     

Agrobiodiversity of Muda Rice Agroecosystem:A case Study in Largest Granary Area of Malaysia

A survey was carried out at the largest rice cultivation area in Peninsular Malaysia,the Muda rice agroecosystem.The main objective of this study was to document the overall biodiversity associated with this unique agroecosystem by using a combination of sampling techniques in order to record different groups of fauna and flora.The total number of biota recorded and identified from the rice field ecosystem during the study period consisted of 46 species of zooplankton,81 species of aquatic insects,5 species of rodents,7 species of bats,87 species of birds,11 species of fishes and 58 species of weeds.A long-term study should be carried out as more species are expected to be recorded when more of the Muda rice agroecosystem area has been sampled to obtain sufficient information on the Muda rice agrobiodiversity.     

Modelling the effects of climatic and hydrological regime changes on the sediment dynamics of the Fraser River Basin,British Columbia,Canada

Future sediment dynamics may be affected by changing climates or hydrological regimes because of the close link between hydrology and sediment erosion, deposition, and transport. Previously, investigations of these potential changes have been constrained by a combination of limited observational data, hydrological drivers, and appropriate mechanistic models. Additionally, there is often ambiguity regarding how to disentangle the impacts of climate and hydrology from direct human factors such as reservoirs and land‐use change, which often exert more control over sediment dynamics. In this study, we utilize a recently developed, large‐scale, distributed, mechanistic sediment transport model to project future sediment erosion, deposition, and transportation within the Fraser River Basin in British Columbia, Canada—a basin with historical water flux and sediment load observations and limited anthropogenic influences upstream of its delta. The sediment model is driven by synthetic land‐surface hydrology derived from Scenarios A1B, A2, and B1 of the Special Report on Emissions Scenarios, which were provided by the Pacific Climate Impacts Consortium. Resulting simulations of water flux and sediment load from 1965 to 1994 are first validated against observational data then compared with future projections. Future projections show an overall increase in annual hillslope erosion and in‐channel transportation, a shift towards earlier spring peak erosion and transportation, and longer persistence of the sediment signal through the year. These shifts in timing and annual yield may have deleterious effects on spawning sockeye salmon and are insufficient to counteract future coastal retreat caused by sea‐level rise.