Annual production and productivity of the macrophytes of river Champanala,a side spill channel of the Ganges at Bhagalpur

The present investigation gives the turnover value and productivity of macrophytes like Eichhornia crassipes, Hydrilla verticillata, Ceratophyllum demersum, Potamogeton crispus and Azolla pinnata for the year 1978 at Koylaghat site of the Champanala channel, a southern side spill channel of the river Ganges. The average annual production of all the macrophytes comes to 3.925 g/m² · d, which is better than the world average of rice cultivated fields. All the important macrophytes in the present investigation are replaced annually. In contrast to pond and reservoir ecosystems, where the productivity of macrophytes is highest in the rainy season, in the Champanala channel the most of the macrophytes are absent from July to December and maximal productivity was about 4 g/m² · d from February to April. The difference in the development of macrophytes in standing and flowing waters results from the fact that in the rainy season increasing flow velocity, sudden fluctuations in water column depth and other destabilising factors produce unfavourable conditions for macrophytes in flowing waters.     

Artificial neural network simulation for prediction of suspended sediment concentration in the River Ramganga,Ganges Basin,India

The relation between the water discharge (Q) and suspended sediment concentration (SSC) of the River Ramganga at Bareilly, Uttar Pradesh, in the Himalayas, has been modeled using Artificial Neural Networks (ANNs). The current study validates the practical capability and usefulness of this tool for simulating complex nonlinear, real world, river system processes in the Himalayan scenario. The modeling approach is based on the time series data collected from January to December (2008-2010) for Q and SSC. Three ANNs (T1-T3) with different network configurations have been developed and trained using the Levenberg Marquardt Back Propagation Algorithm in the Matlab routines. Networks were optimized using the enumeration technique, and, finally, the best network is used to predict the SSC values for the year 2011. The values thus obtained through the ANN model are compared with the observed values of SSC. The coefficient of determination (R2), for the optimal network was found to be 0.99. The study not only provides insight into ANN modeling in the Himalayan river scenario, but it also focuses on the importance of understanding a river basin and the factors that affect the SSC, before attempting to model it. Despite the temporal variations in the study area, it is possible to model and successfully predict the SSC values with very simplistic ANN models.     

Active fault database of Turkey

We have updated the active fault map of Turkey and built its database within GIS environment. In the study, four distinct active fault types, classified according to geochronological criteria and character, were delineated on the 1:25,000 base map of Turkey. 176 fault segments not included in the former active fault map of Turkey, have been identified and documented. We infer that there are 485 single fault segments which are substantially potential seismic sources. In total 1964 active-fault base-maps were transferred into the GIS environment. Each fault was attributed with key parameters such as class, activity, type, length, trend, and attitude of fault plane. The fault parameters are also supported by slip-rate and seismogenic depth inferred from available GPS, seismological and paleoseismological data. Additionally, expected maximum magnitude for each fault segment was estimated by empirical equations. We present the database in a parametric catalogue of fault segments to be of interest in earthquake engineering and seismotectonics. The study provides essential geological and seismological inputs for regional seismic hazard analysis of all over Turkey and its vicinity.     

Sea level variability at Antalya and Mente? tide gauges in Turkey: atmospheric, steric and land motion contributions

Sea level trends and interannual variability at Antalya and Menteş tide gauges are investigated during the 1985–2001 period, quantifying the roles of atmospheric, steric and local land motion contributions. Tide gauge sea level measurements, temperature/salinity climatologies and GPS data are used in the analyses and the results are compared with the output of a barotropic model forced by atmospheric pressure and wind. The overall sea level trends at two tide gauges collocated with GPS are in the range of 5.5 to 7.9 mm/yr during the study period, but showing different behaviour in the sub-periods 1985–1993 and 1993–2001 due to variations in the contributing factors both in space and time. After the removal of the atmospheric forcing and steric contribution from sea level records, the resulting trends vary between 1.9 to 4.5 mm/yr in Antalya and −1.2 to −11.6 mm/yr in Menteş depending on the period considered. Vertical land movement estimated from GPS data seems to explain the high positive residual trend in Antalya during the whole period. On the other hand, the source of the highly negative sea level trend of about −14 mm/yr in Menteş during 1985–1993 could not be resolved with the available datasets. Interannual variability of wind and atmospheric pressure appear to dominate the sea level at both tide gauges during the study period. Atmospheric and steric contributions together account for ∼50% of the total sea level variance at interannual time scales. Mass induced sea level variations which were not considered in this study may help to close the sea level trend budgets as well as to better explain the interannual sea level variance.     

Parametric analysis of liquid storage tanks base isolated by curved surface sliding bearings

Curved surface sliding bearings, which are usually called as friction pendulum system (FPS) are commonly used for base isolation of liquid storage tanks since the period of the isolation system is independent of the storage level. However the restoring force and the damping at the isolation system are functions of axial load which changes during an earthquake excitation. This change might be in appreciable amounts especially for the tanks with high aspect ratios. The present paper focuses on earthquake performances of both broad and slender tanks base isolated by FPS bearings. The effects of overturning moment and vertical acceleration on axial load variation at the bearings are considered. The efficiency of the isolation system is investigated by analyzing the effects of various parameters such as; (i) isolation period, (ii) tank aspect ratio and (iii) coefficient of friction. The Haroun and Housner's three-degrees-of-freedom lumped mass model was used to solve the governing equations of motion in which convective, impulsive and rigid masses were included. A number of selected ground motions were considered and the results were compared to those of non-isolated cases.As a result, base isolation was found to be effective in reducing the base shear values for both broad and slender tanks without significantly affecting the sloshing displacements of the broad ones. The efficiency was even more pronounced for slender tanks subjected to near fault ground motions for isolation periods above 3 s. This specific value of isolation period also eliminated possible design problems arising from under-estimation of base shear values (up to 40%) due to ignoring the effects of axial load variation in lower isolation periods. Overturning effects should not be ignored especially for tanks with high aspect ratios (S) and being subjected to near fault ground motion.     

An analysis of wave properties of isothermal plasma around Reissner-Nordström black hole

The 3+1 spacetime split is used in a preliminary investigation of waves propagating in a medium of isothermal plasma in the vicinity of event horizon of Reissner-Nordström planar analogue. The general relativistic magnetohydrodynamic equations for isothermal have been investigated there. The dispersion relations are obtained by using linear perturbation and Fourier analyze techniques for non-rotating and rotating, non-magnetized and magnetized environment. The wave number, phase velocity, group velocity etc. are shown to discuss the nature of the waves.     

Magnetohydrodynamic equilibrium and stability of pre-flare loops

The equilibrium and stability of a loop in which energy storage occurs prior to a solar flare is discussed. Working on the hypothesis, that the onset of the flare begins only after sufficient magnetic energy has been stored in the loop typical values of parameters which describe the equilibrium are found for a magnetic field with a constant twist. The stability of this configuration is examined next and it is shown that for the force-free case, the structure is always unstable to kinking for any degree of twist. However, a slight deviation from the force-free configuration, through the presence of a small positive transverse pressure gradient, can stabilize the loops for moderate degrees of twist. The range of wave-numbers for which instability occurs and the maximum growth rates are also presented. Lastly, it is shown that the pressure gradients required to stabilize a pre-flare loop do not lead to conflict with observations.     

A time dependent model for spicule flow

A time dependent model for the flow of gas in a spicule is studied. In this model, the flow occurs in a magnetic flux sheath. Starting from hydrostatic equilibrium, the flux sheath is allowed to collapse normal to itself. The collapse induces a flow of gas along the magnetic field and this flow is identified as a spicule. A variety of sheath geometries and velocity patterns for the normal flow have been studied. It is observed that a large curvature in the field geometry and a large initial value for the normal flow are necessary to achieve spicule-like velocities. The duration for which a large velocity of normal flow is required is much shorter than the average lifetime of a spicule. It is proposed that the initial rapid collapse occurs during an impulsive spicule phase and it is the subsequent gradual relaxation of the flow which is observed as a spicule.     

Tectonic implications of transtensional supradetachment basin development in an extension‐parallel transfer zone: the Kocaçay Basin,western Anatolia,Turkey

The Kocaçay Basin (KÇB) is a key area in western Anatolia – a well‐known extended terrane where regional segmentation has received limited attention – for investigating strike‐slip faults kinematically linked to detachment faults. In this paper, we present results of an integrated sedimentologic, stratigraphic, and structural study of Miocene alluvial fan/fan‐delta/lacustrine deposits that accumulated in the KÇB, a NE‐trending basin with connections to the Menderes Metamorphic Core Complex (MCC). We mapped and evaluated most of the key faults in the KÇB, many for the first time, and recognised different deformation events in the study area near the E margin of the MCC. We also present field evidence for kinematic connections between low‐angle normal and strike‐slip faults which were developed in an intermittently active basement‐involved transfer zone in western Anatolia. We find that the KÇB contains a detailed record of Miocene transtensional sedimentation and volcanism that accompanied exhumation of the MCC. Structural data reveal that the basin was initially formed by transtension (D1 phase) and subsequently uplifted and deformed, probably as a result of early Pliocene wrench‐ to extension‐dominated deformation (D2 phase) overprinted by Plio‐Quaternary extensional tectonics (D3 phase). These results are consistent with progressive deformation wherein the axis of maximum extension remained in the horizontal plane but the intermediate and maximum shortening axes switched position in the vertical plane. Combining our results with published studies, we propose a new working hypothesis that the KÇB was a transtensional supradetachment basin during the Miocene. The hypothesis could provide new insights into intermittently active extension‐parallel zone of weakness in western Anatolia.These results also suggest that the termination of low‐angle normal fault systems within an extension parallel transfer zone may have resulted in a transtensional depressions which are different from classical supradetachment basins with respect to the sedimentation and deformational pattern of the basin infills.