Daily suspended sediment estimation using neuro-wavelet models

This paper proposes the application of neuro-wavelet technique for modeling daily suspended sediment–discharge relationship. The neuro-wavelet models are obtained by combining two methods, artificial neural networks (ANN) and discrete wavelet transform. The accuracy of the neuro-wavelet and the ANN models is compared with each other in suspended sediment load estimation. The daily streamflow and suspended sediment data from two stations on Tongue River in Montana are used as case studies. The comparison results reveal that the suggested model could increase the estimation accuracy.     

An Experimental and Theoretical Approach on the Modeling of Sliding Response of Rock Wedges under Dynamic Loading

The stability of rock slopes under dynamic loading in mining and civil engineering depends upon the slope geometry, mechanical properties of rock mass and discontinuities, and the characteristics of dynamic loads with time. The wedge failure is one of the common forms of slope failures. The authors presented some stability conditions for rock wedges under dynamic loading and they confirmed their validity through the laboratory experimental studies in a previous paper in 2000, which is often quoted by others to validate their softwares, including some commercial software. In this study, the authors investigate the sliding responses of rock wedges under dynamic loads rather than the initiation of wedge sliding. First, some laboratory model tests are described. On the basis of these model tests on rock wedges, the theoretical model proposed previously is extended to compute the sliding responses of rock wedges in time domain. The proposed theoretical model is applied to simulate the sliding responses of rock wedge model tests and its validity is discussed. In the final part, the method proposed is applied to actual wedge failures observed in 1995 Dinar earthquake and 2005 Pakistan–Kashmir earthquake, and the results are discussed.     

20th-CENTURY CHANGES OF TEMPERATURE IN THE MOUNTAIN REGIONS OF CENTRAL EUROPE

Daily maximum and minimum temperatures from 29 low-lying and mountain stations of 7 countries in Central Europe were analyzed. The analysis of the annual variation of diurnal temperature range helps to distinguish unique climatic characteristics of high and low altitude stations. A comparison of the time series of extreme daily temperatures as well as mean temperature shows a good agreement between the low-lying stations and the mountain stations. Many of the pronounced warm and cold periods are present in all time series and are therefore representative for the whole region. A linear trend analysis of the station data for the period 1901–1990 (19 stations) and 1951–1990 (all 29 stations) shows spatial patterns of similar changes in maximum and minimum daily temperatures and diurnal temperature range. Mountain stations show only small changes of the diurnal temperature range over the 1901–1990 period, whereas the low-lying stations in the western part of the Alps show a significant decrease of diurnal temperature range, caused by strong increase of the minimum temperature. For the shorter period 1951–1990, the diurnal temperature range decreases at the western low-lying stations, mainly in spring, whereas it remains roughly constant at the mountain stations. The decrease of diurnal temperature range is stronger in the western part than in the eastern part of the Alps.     

Testing the ability of bentonite-amended natural zeolite (clinoptinolite) to remove heavy metals from liquid waste

 The design of environmentally sound liquid waste containment structures has become a crucial task in engineering applications due to ever increasing groundwater contamination from such sites. Construction of such structures usually requires a bottom liner of low hydraulic conductivity as part of the design. In order to reduce the hazards associated with liquid wastes including landfill leachate, bentonite-amended natural zeolite is proposed as an alternative to conventional earthen liners. Among many contaminants associated with liquid wastes, heavy metals are the most dangerous ones. This paper deals with determining the ability of natural zeolite to remove heavy metals from aqueous waste. For this purpose, crushed natural zeolite (clinoptinolite) is amended with commercial powdered bentonite to yield a soil mixture low in permeability and high in ion-exchange capacity. Leachate from a conventional landfill is used as the percolation fluid. Concentrations of certain heavy metals in the effluent fluid percolated through the bentonite-zeolite mixture are compared with that of initial leachate. The conclusion is reached that certain metals are efficiently removed from the influent solution by the soil matrix whereas some ions do not show significant reduction in concentration. This is attributed to high hydraulic conductivity of the bentonite-zeolite mixture.     

Formation and composition of cemented layers in low-sulphide mine tailings, Laver, northern Sweden

Cemented layers (hardpans) are common in carbonate or sulphide-rich mine tailings and where pyrrhotite is the predominating Fe-sulphide. Laver, northern Sweden, is an abandoned Cu-mine where the tailings have low pyrrhotite content, almost no pyrite and no carbonates. Two cemented layers at different locations in the Laver tailings impoundment were investigated, with the aim to determine their effects on metal mobility. The cementing agents were mainly jarosite and Fe-oxyhydroxides in the layer formed where the tailings have a barren surface, whereas only Fe-oxyhydroxides were identified below grass-covered tailings surface. Arsenic was enriched in both layers which also exhibit high concentrations of Mo, V, Hg and Pb compared to unoxidised tailings. Sequential extraction indicates that these metals and As were mainly retained with crystalline Fe-oxides, and therefore potentially will be remobilised if the oxic conditions become more reducing, for instance as a result of remediation of the tailings impoundment.An erratum to this article can be found at     

Pyrite geochemistry in the Toarcian Posidonia Shale of south‐west Germany: Evidence for contrasting trace‐element patterns of diagenetic and syngenetic pyrites

Authigenic pyrite grains from a section of the Lower Toarcian Posidonia Shale were analysed for their trace‐element contents and sulphur‐isotope compositions. The resulting data are used to evaluate the relationship between depositional conditions and pyrite trace‐element composition. By using factor analysis, trace‐elements in pyrite may be assigned to four groups: (i) heavy metals (including Cu, Ni, Co, Pb, Bi and Tl); (ii) oxyanionic elements (As, Mo and Sb); (iii) elements partitioned in sub‐microscopic sphalerite inclusions (Zn and Cd); and (iv) elements related to organic or silicate impurities (Ga and V). Results indicate that trace‐element contents in pyrite depend on the site and mechanism of pyrite formation, with characteristic features being observed for diagenetic and syngenetic pyrites. Diagenetic pyrite formed within anoxic sediments generally has a high heavy metals content, and the degree of pyritization of these elements increases with increasing oxygen deficiency, similar to the degree of pyritization of reactive Fe. The highest gradient in the increase of the degree of trace element pyritization with bottom‐water oxygenation was found for the elements Ni < Cu < Mo = As < Tl. In contrast, syngenetic pyrite formed within a euxinic water column typically is enriched in As, Mo and Sb, but is low in heavy metals, and the geochemical variation reflects changes in sea water composition.     

Role of carbonates in mitigation of metal release from mining waste. Evidence from humidity cells tests

 Leaching of two contrasting types of sulphidic tailings in humidity cells has been performed. The release of heavy metals and the oxidation rate have been studied. Tailings from the Laver mine contain a few percent sulphides and lack carbonates, whereas tailings from the Stekenjokk mine are both sulphide- and carbonate-rich. The results showed that in the leachates from the Laver samples, the metal concentrations increased and pH decreased with time, indicating an increased oxidation rate. In the Stekenjokk samples, pH remained high during the experiment, thereby keeping the metal concentrations low in the leachates. The oxidation rate also decreased with time, probably due to Fe-hydroxide coatings on sulphide surfaces. The results show that addition of carbonates and the maintenance of a high pH not only reduce the solubility of heavy metals, but also decrease the oxidation rate of sulphides. Received: 20 January 1998 · Accepted: 2 April 1998