The 11 March 2011 East Japan Earthquake and Tsunami: Tsunami Effects on Coastal Infrastructure and Buildings

The 11 March 2011 East Japan Earthquake and Tsunami caused unprecedented damage to well-engineered buildings and coastal structures. This report presents some notable field observations of structural damage based on our surveys conducted along the Sanriku coast in April and June 2011. Engineered reinforced concrete buildings failed by rotation due to the high-velocity and deep tsunami inundation: entrapped air in the buildings and soil liquefaction by ground shaking could have contributed to the failure. The spatial distribution pattern of destroyed and survived buildings indicates that the strength of tsunami was affected significantly by the locations of well-engineered sturdy buildings: weaker buildings in the shadow zone tended to survive while jet and wake formations behind the sturdy buildings enhanced the tsunami forces. We also found that buildings with breakaway walls or breakaway windows/doors remained standing even if the surrounding buildings were washed away or destroyed. Several failure patterns of coastal structures (seawalls) were observed. Flow-induced suction pressure near the seawall crown could have caused the failure of concrete panels that covered the infill. Remarkable destruction of upright solid-concrete type seawalls was closely related with the tsunami induced scour and soil instability. The rapid decrease in inundation depth during the return-flow phase caused soil fluidization down to a substantial depth. This mechanism explains severely undermined roads and foundations observed in the area of low flow velocities.     

Nickel content of basaltic magmas: identification of primary magmas and a measure of the degree of olivine fractionation

Available NiO analyses of olivine in peridotites of probable mantle origin are consistent in giving values around 0.40 weight per cent. Assuming that basaltic magma forming from the mantle was in equilibrium with such peridotitic olivine, the NiO content of primary basaltic magmas is estimated to be about 0.030–0.050 weight per cent. The fractionation behaviour of nickel in basaltic magma due to the crystallization of olivine has been calculated using constant NiMg and FeMg exchange partition coefficients between olivine and magma. It is shown that the NiO content of both magma and olivine decreases by 50 per cent after fractional crystallization of 6–12 per cent of olivine. The nickel distribution in some basaltic rocks and olivines is examined in the light of these results, and it is suggested that basaltic magmas, such as some of the ocean-floor basalt and the Hawaiian tholeiite and alkali basalts, represent primary magmas from mantle peridotites.     

Viscosity measurements of subliquidus magmas: Alkali olivine basalt from the Higashi-Matsuura district, Southwest Japan

We carried out viscosity measurements and sampling of a crystal suspension derived from alkali olivine basalt from the Matsuura district, SW Japan, at subliquidus temperatures from 1230 °C to 1140 °C under 1 atm with NNO oxygen buffered conditions. Viscosity increased from 31 to 1235 Pa s with a decrease in temperature from 1230 to 1140 °C. On cooling, olivine first appeared at 1210 °C, followed by plagioclase at 1170 °C. The crystal content of the sample attained 31 vol.% at 1140 °C (plagioclase 22%, olivine 9%). Non-Newtonian behaviors, including thixotropy and shear thinning, were pronounced in the presence of tabular plagioclase crystals. The cause of such behavior is discussed in relation to shear-induced changes in melt–crystal textures. Relative viscosities, η_r (= η_s / η_m, where η_s and η_m are the viscosities of the suspension and the melt, respectively), were obtained by calculating melt viscosities from the melt composition and temperature at 1 atm using the equation proposed by Giordano and Dingwell [Giordano, D., Dingwell, D.B., 2003. Non-Arrhenian multicomponent melt viscosity: a model. Earth and Planetary Science Letters, 208, 337–349.]. The obtained relative viscosities are generally consistent with the Einstein–Roscoe relation, which represents η_r for suspensions that contain equant and equigranular crystals, even though the crystal suspension analyzed in the present experiments contained tabular plagioclase and granular olivine of various grain sizes. This consistency is attributed to the fact that the effect of crystal shape was counterbalanced by the effect of the dispersion of crystal size. The applicability of the Einstein–Roscoe equation with respect to crystal shape is discussed on the basis of the present experimental results. Our experiments and those of Sato [Sato, H., 2005. Viscosity measurement of subliquidus magmas: 1707 basalt of Fuji volcano. Journal of Mineralogical and Petrological Sciences, 100, 133–142.] show that the relationship between relative viscosity and crystal fraction is consistent with the Einstein–Roscoe relationship for axial ratios that are smaller than the critical value of 4–6.5, but discrepancies occur for higher ratios.     

Distribution and characteristics of landslides induced by the Iwate–Miyagi Nairiku Earthquake in 2008 in Tohoku District, Northeast Japan

The Iwate–Miyagi Nairiku Earthquake in 2008, whose seismic intensity was M. 7.2 in Japan Meteorological Agency (JMA) scale, induced innumerable landslides on the southern flank of Mt. Kurikoma volcano allocated along the Ou Backbone Range in Northeast Japan. Most landslides are detected in a hanging wall side of the seismic fault. Those landslides are classified into five types: deep-seated slide, debris slide, shallow debris slide, secondary shallow debris slide, and debris flow. Most common landslide types induced by the earthquake are shallow debris slides and subsequent debris flows. They are intensively distributed along steep gorges incising a volcanic skirt of Mt. Kurikoma, consisting of welded ignimbrite of the Pleistocene age. Debris flows are also distributed even along gentle river floors in the southern lower flank of the volcano. The area of densely distributed debris slides, shallow debris slides, and debris flows is concordant with that of severe seismic tremor. Thus, genetic processes of landslides induced by the Iwate–Miyagi Nairiku Earthquake in 2008 are attributed to multiple causative factors such as geology, topography, and seismic force.     

Mapping of micro topography using airborne laser scanning

Intense rainfall conditions and seismic activity commonly trigger fluidised landslides which are characterized by rapid movement and long run-out. They are potentially a very dangerous form of landslide phenomena and may result in extensive damage due to their sudden movement. Until now, photogrammetry has been used to produce maps and investigate such landslides in areas where these disasters occur. Recently, however, airborne laser scanning technology has become a promising technique for making topographical maps and investigating the micro topographic details of these landslide disasters, particularly on slopes around urban areas where the potential risk is high. In this study, airborne laser scanning was carried out in the Tama Hills, near Tokyo, Japan, which is extensively affected by this type of landsliding. The effectiveness of this technique was tested and compared with a laser contour map and aerial photograph interpretations.     

Non-Existence of the Modified First Integral by Symplectic Integration Methods II: Kepler Problem

Symplectic integration methods conserve the Hamiltonian quite well because of the existence of the modified Hamiltonian as a formal conserved quantity. For a first integral of a given Hamiltonian system, the modified first integral is defined to be a formal first integral for the modified Hamiltonian. It is shown that the Runge-Lenz vector of the Kepler problem is not well conserved by symplectic methods, and that the corresponding modified first integral does not exist. This conclusion is given for a one-parameter family of symplectic methods including the symplectic Euler method and the Störmer/Verlet method.     

Hahajima Seamount: An enigmatic tectonic block at the junction between the Izu–Bonin and Mariana Trenches

Abstract   The Hahajima Seamount, located at the junction between the Izu–Bonin and Mariana forearc slopes, is a notable rectangular shape and consists of various kinds of rocks. An elaborated bathymetric swath mapping with geophysical measurements and dredge hauls showed the Hahajima Seamount is cut by two predominating lineaments, northeast–southwest and northwest–southeast. These lineaments are of faults based on the topographic cross-sections and a 3-D view (whale's eye view). The former lineament is parallel to the transform faults of the Parece Vela Basin, whereas the latter is parallel to the nearby transform fault on the subducting Pacific Plate. The rocks constituting the seamount are ultramafic rocks (mostly harzburgite), boninite, basalt, andesite, gabbro, breccia and sedimentary rocks, which characterize an island arc and an ocean basin. Gravity measurement and seismic reflection survey offer neither a definite gravity anomaly at the seamount nor definite internal structures beneath the seamount. A northwest–southeast-trending fault and small-scale serpentine flows were observed during submersible dives at the Hahajima Seamount. The rectangular shape, size of the seamount, various kinds of rocks and geophysical measurements strongly suggest that the Hahajima Seamount is not a simple serpentine seamount controlled by various tectonic movements, as previously believed, but a tectonic block.     

南极中山站午后极光强度与太阳风参数的关系

本文利用1997年和1998年南极中山站多通道扫描光度计的地面观测数据和WIND卫星在弓激波上游对太阳风参数的观测数据，对午后高纬极光强度与太阳风等离子体密度、动压以及太阳风速度之间的相关性进行了定量研究。研究表明，午后极光630．0nm的强度与太阳风等离子体参数之间有较好的相关，630．0nm的强度表现出随太阳风等离子体密度、动压和速度的增大而增加的趋势，其相关系数分别为0．84、0．88和0．61；而557．7nm极光的强度与太阳风等离子体参数之间的相关较差。午后557．7nm极光的强度与太阳风等离子体参数之间的相关较差。午后557．7nm和630．0nm对太阳风参数的不同响应表明太阳风对630．0nm影响更直接，而557．7nm受到了磁层动力学过程的影响。