A 256×256 pixel InSb FPA for SIRTF and other astronomical applications

As part of the NASA Space Infrared telescope Facility (SIRTF), a low noise multiplexer has been developed. The hybridization of this multiplexer to a high indium antimonide (InSb) photodiode array has resulted in a MWIR detector of outstanding performance. The multiplexer is made of a 256×256 array of source follower amplifiers on a 30 m square pitch. Random access binary decoders are used to access each pixel of the array, allowing any read-out scheme to be implemented. Dark current has been measured at temperatures ranging from 4K to 77K. Generation recombination currents dominate above 45K. With 100mV of reverse bias applied, less than 3×10^-17 A is typical below 50K with 8×10^-19 A (5 e^-/s) at 4K. Under the same conditions 0.25 pA was measured at 77K. Read noise has been measured as low as 186 e^- using non-correlated techniques. Detector QE is 50 to 80 % through the entire 1 to 5 m band.     

A verification of some methods to determine the fluxes of momentum,sensible heat,and water vapour using standard deviation and structure parameter of scalar meteorological quantities

A set of micro-meteorological data collected over a horizontal, uniform terrain (the plain of La Crau, France) in June 1987 is analysed. Conditions were predominantly sunny and arid, while due to the Mistral the wind speed could exceed 10 m/s. Verification of several methods to evaluate surface fluxes of heat, momentum and water vapour from the standard deviation of temperature, wind and specific humidity is presented. Also, a similar approach using the structure parameter of temperature is considered. These methods are all based on Monin-Obukhov (M-O) similarity theory. It is found that the standard deviation of temperature, vertical and horizontal wind speed as well as the structure parameter for temperature behave according to M-O similarity. It is shown that the sensible heat flux and friction velocity can be determined from a fast response thermometer and a cup anemometer. Also, it appears that the analytic solution of the set of governing equations as derived by the first author yields good results. M-O theory does not appear to work for the standard deviation of specific humidity. This may be due to the relative importance of large eddies.     

Correlation methods in fingerprint detection studies

This investigation addresses two general issues regarding the role of pattern similarity statistics in greenhouse warming detection studies: normalization, and the relative merits of centered versus uncentered statistics. A pattern correlation statistic is used to search for the greenhouse warming signals predicted by five different models in the observed records of land and ocean surface temperature changes. Two forms of this statistic were computed: R (t), which makes use of nonnormalized data, and (t), which employs point-wise normalized data in order to focus the search on regions where the signal-to-noise ratio is large. While there are no trends in the R (t) time series, the time series of (t) show large positive trends. However, it is not possible to infer from the (t) results that the observed pattern of temperature change is, in fact, becoming increasingly similar to the model-predicted signal. This is because point-wise normalization of the observed and simulated mean change fields by a single common field introduces a common factor effect, which means that the quantities being compared should show some similarity a priori. This does not necessarily make normalization inapplicable, because the detection test involves seeking a trend in the similarity statistic. We show, however, that trends in (t) must arise almost completely from the observed data, and cannot be an indicator of increasing observed data/signal similarity. We also compare the information provided by centered statistics such as R(t) and the uncentered C(t) statistic introduced by Barnett. We show that C(t) may be expressed as the weighted sum of two terms, one proportional to R(t) and the other proportional to the observed spatial mean. For near-surface temperatures, the spatial average term dominates over the R(t) term. In this case the use of C(t) is equivalent to the use of spatial-mean temperature. We conclude that at present, the most informative pattern correlation statistic for detection purposes is R(t), the standard product-moment correlation coefficient between the observed and model fields. Our failure to find meaningful trends in R(t) may be due to the fact that the signal is being obscured by the background noise of natural variability, and/or because of incorrect model signals or sensitivities.     

Kinetics of peptide hydrolysis and amino acid decomposition at high temperature

Dipeptide hydrolysis and amino acid decomposition appear to follow a first-order rate law. The hydrolysis rate increases exponentially with increasing temperature in aqueous solution at both 265 atm and water steam pressures over the temperature range of 100 to 220 degrees C. Dipeptide hydrolysis has a lower apparent activation energy at 265 atm (44.1 KJ/mol) than at water steam pressure (98.9 KJ/mol). At lower temperatures (<200-220 degrees C), the rate of peptide bond hydrolysis is faster at 265 atm than at water steam pressure. At higher temperatures (>200-220 degrees C), however, peptide bond hydrolysis is slower at 265 atm than at water steam pressure. In aqueous solution, amino acid decomposition rates also increase exponentially with increasing temperature. Amino acid decomposition rates are much higher at 265 atm than at water steam pressure over the entire temperature range investigated.     

Molecular and bulk isotopic analyses of organic matter in marls of the Mulhouse Basin (Tertiary, Alsace, France)

Contents of 13C in kerogens and carbonates in 21 samples from a core of the MAX borehole, Mulhouse Evaporite Basin, range from -27.3 to -23.5 and -3.7 to -1.8% vs PDB, respectively. Organic nitrogen in the same samples is enriched in 15N relative to atmospheric N2 by 12.2-15.7%. Hydrogen indices and delta values for kerogens vary systematically with facies, averaging 493 mg HC/g Corg and -25.7% in the most saline facies (dominated by inputs from aquatic sources) and 267 mg HC/g Corg and -23.7% in the least saline facies (50/50 aquatic/terrigenous). Values of delta were measured for individual aliphatic hydrocarbons from three samples representing three different organic facies. For all samples, terrigenous inputs were unusually rich in 13C, the estimated delta value for bulk terrigenous debris, apparently derived partly from CAM plants, being -22.5%. In the most saline facies, isotopic evidence indicates the mixing of 13C-depleted products of photosynthetic bacteria with 13C-enriched products of halotolerant eukaryotic algae. At lower salinities, a change in the producer community is marked by a decrease in the 13C content of algal lipids. The content of 13C in algal lipids increases in the least saline facies, due either to succession of different organisms or to decreased concentrations of dissolved CO2.     

Stratiform and vein U,Mo and Cu mineralization in the Novoveská Huta area,CSFR

U-Mo and Cu mineralization occurs in horizons as well as in veins in the Permian formations near Novoveská Huta. Ore mineralization is represented by uraninite, U-Ti oxides, coffinite, molybdenite, chalcopyrite, tennantite and pyrite. The isotopic composition of S and C displays a larger variability in the stratiform ores (³⁴S from –32.7 to +2.7 and ¹³C from –27.1 to — 0.5) These data suggest mixing of meteoric solutions with fluids of volcanic origin and a complex history. There is a narrower range of ³⁴S from –18.8 to –4.6 and ¹³C from –6.3 to –2.5% in quartz-carbonate veins with Cu mineralization suggesting a deep source of ore-bearing solutions. The Permian volcanics were a significant source of ore elements.Their contents of U, Mo, Cu and Y are from two to eight times higher than in sedimentary rocks. Accumulations of ore elements in the horizons were formed by the reduction and adsorption processes 240 ± 30 Ma ago according to U-Pb isotopic dating. Due to Alpine tectonism, these low-grade ores (U<0.1 wt%) were remobilized and higher-grade U-Mo ores (U>0.1 wt%) were formed 130 ± 20 Ma ago at temperatures ranging from 110 to 120° C, according to fluid inclusions. Younger veins with Cu mineralization were formed 115 ± 10 Ma according to the model age of Pb at temperatures ranging from 95 to 190°C.     

Cu 2p absorption spectroscopy as a probe for the site occupancy of (ZnxCu1−x)WO4 solid solution

The solid solution sanmartinite (ZnWO₄)—cuproscheelite (CuWO₄) has been studied using Cu 2p X-ray absorption spectroscopy. While a single L₃ absorption peak is observed for CuWO₄, two distinct L₃ absorption peaks with a separation of ～0.8 eV are observed for the intermediate samples in the solid solution. The two peaks represent distinct Cu sites: one with all CuO₆ next nearest neighbours in the (Cu,Zn)O₆ chains, another having at least one ZnO₆ next nearest neighbour. Both sites show a linear increase in covalency as a function of increasing Cu-content. The relative intensities of the two absorption peaks is dependent upon the Cu-content and has been used to model the site occupancies. The results reveal that the local structural effects can be associated with a composition-dependent structural phase transition from P2/c (ZnWO₄) to P $\bar 1$ (CuWO₄). Deviations from a single-site model are explained in terms of the local environments, and evidence for site preferences and local clustering are explored.     

Effects of onshore and offshore topography on sea breeze circulation: An observational study at eastern Attica,Greece

Field measurements of wind, air temperature and humidity were taken at the eastern part of the Attika district in June 1991, to examine the topographic influences exerted on the local sea breezes. These influences are due either to the elongated Evia island, faced by the northern half of Attica coastline some tens of kilometers offshore, or to the coast-parallel range of Hymettos mountain, rising steeply 12 km onshore. The instrumentation consisted mainly of three tethered meteorological balloons released at characteristic sires (i.e., the coast, a location between shoreline and mountain foot and the mountain top) and three autographic ground-based anemometers operating at selected locations. Data from the ground-based and upper air stations of the Hellenic National Meteorological Service, as well as the diurnal weather maps were also obtained and analyzed. Observations were made under different synoptic wind and the latter was found to determine remarkably the significance of the topographic effects. A preliminary two-dimensional numerical approach was also made concerning the sea breeze capability to reach the Hymettos mountain top in the case of a weak opposing geostrophic flow.     

The emplacement of intermediate volume ignimbrites: A case study from Roccamonfina Volcano,Southern Italy

A model is presented for the emplacement of intermediate volume ignimbrites based on a study of two 6 km³ volume ignimbrites on Roccamonfina Volcano, Italy. The model considers that the flows were slow moving, and quickly deflated from turbulent to non-turbulent conditions. Yield strength and density increased whereas fluidisation decreased with time and runout of the pyroclastic flows. In proximal locations, on the caldera rim, heterogeneous exposures including discontinuous lithic breccias, stratified and cross-stratified units interbedded with massive ignimbrite suggest deposition from turbulent flows. In medial locations thick, massive ignimbrite occurs associated with three types of co-ignimbrite lithic breccia which we interpret as being emplaced by non-turbulent flows. Multiple grading of different breccia/lithic concentration types within single flow units indicates that internal shear occurred producing overriding or overlapping of the rear of the flow onto the slower-moving front part. This overriding of different parts of non-turbulent pyroclastic flows could be caused by at least two different mechanisms: (1) changes in flow regime, such as hydraulic jumps that may occur at breaks in slope; and (2) periods of increased discharge rate, possibly associated with caldera collapse, producing fresh pulses of lithic-rich material that sheared onto the slower-moving part of the flow in front.We propose that ground surge deposits enriched in pumice compared with their associated ignimbrite probably formed by a flow separation mechanism from the top and front of the pyroclastic flow. These turbulent clouds moved ahead of the non-turbulent lower part of the flow to form stratified pumice-rich deposits. In distal regions well-developed coarse, often clast-supported, pumice concentrations zones and coarse intra-flow-unit lithic concentrations occur within the massive ignimbrite. We suggest that the flows were non-turbulent, possessed a relatively high yield strength and may have moved by plug flow prior to emplacement.