Pumpspeicherwerke und Hechtbrut—ein Modellversuch

The effects of periodic, simulated water level fluctuations on northern pike fry produced by pumped-storage operations were examined. Daily fluctuations of 10 cm caused a significant increase in the daily mortality rate. Waves reduced the detrimental effect of water level lfuctuations, at least during the adhesive phase of fry.     

A stratospheric balloon experiment to test the Huygens atmospheric structure instrument (HASI)

We developed a series of balloon experiments parachuting a 1:1 scale mock-up of the Huygens probe from an altitude just over to simulate at planetary scale the final part of the descent of the probe through Titan's lower atmosphere. The terrestrial atmosphere represents a natural laboratory where most of the physical parameters meet quite well the bulk condition of Titan's environment, in terms of atmosphere composition, pressure and mean density ranges, though the temperature range will be far higher.The probe mock-up consists of spares of the HASI sensor packages, housekeeping sensors and other dedicated sensors, and also incorporates the Huygens Surface Science Package (SSP) Tilt sensor and a modified version of the Beagle 2 UV sensor, for a total of 77 acquired sensor channels, sampled during ascent, drift and descent phase.An integrated data acquisition and instrument control system, simulating the HASI data-processing unit (DPU), has been developed, based on PC architecture and soft-real-time application. Sensor channels were sampled at the nominal HASI data rates, with a maximum rate of . Software has been developed for data acquisition, onboard storage and telemetry transmission satisfying all requests for real-time monitoring, diagnostic and redundancy.The mock-up of the Huygens probe mission was successfully launched for the second time (first launch in summer 2001, see Gaborit et al., 2001) with a stratospheric balloon from the Italian Space Agency Base “Luigi Broglio” in Sicily on May 30, 2002, and recovered with all sensors still operational. The probe was lifted to an altitude of and released to perform a parachuted descent lasting , to simulate the Huygens mission at Titan. Preliminary aerodynamic study of the probe has focused upon the achievement of a descent velocity profile reproducing the expected profile of Huygens probe descent into Titan.We present here the results of this experiment discussing their relevance in the analysis of the data which will be obtained during the Huygens mission at Titan.     

Geometric test field calibration of digital photogrammetric sensors

Test field system calibration will be a fundamental part of the future photogrammetric production line. Accurate calibration and performance evaluations are necessary for fully assessing the stability and accuracy of digital sensing techniques. In this paper, a method of comprehensive geometric calibration in a test field has been developed and empirically tested using eight image blocks collected with three UltraCamD digital large format photogrammetric cameras. Permanent photogrammetric test fields form the basis of the method. Important components of the method are determination of system parameters, evaluation of systematic errors, and assessment of geometric accuracy. The results showed that UltraCamD images contained systematic deformations that could not be modeled with single lens additional parameter models. Good point determination accuracy was obtained despite the systematic errors; the typical accuracy was 2–3 μm in image space in the horizontal coordinates and 0.05–0.09‰ of the object distance in height. One of the cameras had significantly poorer performance. In the worst cases, the horizontal accuracy was 5 μm in image space and the height accuracy was 0.18‰ of the object distance. The analog cameras gave better results than the UltraCamD, but the development of appropriate mathematical models for UltraCamD as well as improvements in digital sensors may change the situation in the near future.     

Overall-effective Measures for Sustainable Water Resources Management in the Coastal Areas of Shandong Province, China ——Case Study： the Huangshuihe River Catchment of Longkou City

In the coastal catchments of Shandong Province the water scarcity is aggravated due to saltwater intrusion, reducing the usability of water resources available. Such a situation calls for sustainable integrated water resources management （IWRM）. The idea for the objectives and implementation of the IWRM are explained in this paper. The general objective of the planned project disscussed in the present study is to bring together German traditional expertise in water resources management and newer developments in the context of the European Water Framework Directive; the research efforts aim to relieve the desperate water scarcity situation in the costal area of Shandong Province.     

Morphological changes on meander point bars associated with flow structure at different discharges

This study investigates the impact of flow structure of different discharges on meander point bar morphology. We carried out mobile and terrestrial laser scanning campaigns before and after a flood on two sandy‐bed point bars. Between the scans, the flow structure was examined using an Acoustic Doppler Current Profiler at three flow stages. The results indicated that a meander point bar both affects and in turn, is itself modified by the flow at different discharges. The lower flow stages also have a significant effect on point bar morphology, especially on deposition over the bar head. Secondary circulation is responsible for scroll bar formation on the point bar margin beyond the apex. Flow separation at the inner bank, by contrast, does not require secondary circulation, but is dependent on flow depth over the point bar. A sudden increase in depth beyond the point bar top causes decreased stream power over the bar tail. The flow separation and decreased stream power cause a slow flow zone and net deposition over point bar tail. The backwater effect, if evident, may strengthen the process. Thus, filling over the bar tail seems generic for point bars and independent on secondary flow. Chutes and chute bars, scroll bars, bar head filling and bar platform filling, by contrast, require special fluvio‐morphological circumstances discussed in this paper. Whilst this paper confirms that the three‐dimensional flow structure has a major effect on point bar morphology, the flow structure seems to depend on how the point bar affects the flow trajectory which, in turn, depends upon the flow stage. Finally, the shape of the bend and the grain size distribution control the impacts of the flow structure, leading to divergent morphologies of point bars with certain generic features. Copyright © 2012 John Wiley & Sons, Ltd.     

Erosion mechanisms and sediment sources in a peatland forest after ditch cleaning

Ditch cleaning in drained peatland forests increases sediment loads and degrades water quality in headwater streams and lakes. A better understanding of the processes controlling ditch erosion and sediment transport in such systems is a prerequisite for proper peatland management. In order to relate hydrological observations to key erosion processes in headwater peatlands drained for forestry, a two‐year study was conducted in a nested sub‐catchment system (treated with ditch cleaning) and at two reference sites. The treated catchment was instrumented for continuous discharge and turbidity monitoring, erosion pin measurements of changes in ditch bed and banks and time‐integrated sampling of suspended sediment (SS) composition. The results showed that ditch cleaning clearly increased transient suspended sediment concentrations (SSCs) and suspended sediment yields (SSYs), and resulted in temporary storage of loosely deposited organic sediment in the ditch network. After exhaustion of this sediment storage, subaerial processes and erosion from ditch banks became dominant in producing sediment for transport. Recorded SSCs were higher on the rising limbs of event hydrographs throughout the study period, indicating that SS transport was limited by availability of erosion‐prone sediment. A strong positive correlation (R² = 0.84, p < 0.001) between rainfall intensity (above a threshold of 1 mm h^?1) and average SSC obtained on the rising limb of hydrographs for the sub‐catchment showed that soil detachment from ditch banks by raindrop impact can directly increase SSC in runoff. At the main catchment outlet, variation in SSC was best explained (R² = 0.67, p < 0.05) by the linear combination of initial discharge (?), peak discharge (+) and the lag time from initial to peak discharge (?). Based on these factors, ditch cleaning slightly increased peak discharges and decreased transit times in the study catchment. The implications of the results for water pollution management in peatland forests are discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

XAFS characterization of the structural site of Yb in synthetic pyrope and grossular garnets

The incorporation and site preference of minor amounts (about 1 wt%) of Yb³⁺ in synthetic pyrope (Mg₃Al₂Si₃O₁₂) and grossular (Ca₃Al₂Si₃O₁₂) garnet were studied by X-ray Absorption Fine-Structure (XAFS) Spectroscopy. The measurements, performed in the temperature range 77–343 K at both Yb L_I- and L_III-edges, demonstrate that Yb³⁺ enters the garnet structure and is located in the dodecahedral site in both samples. The coordination environment of Yb³⁺ in the two samples was compared to that of the X-site cation in end-member synthetic pyrope and grossular and in Yb₃Al₅O₁₂ as determined by single-crystal X-ray diffraction. The local geometry around Yb³⁺ is different from that of Mg and Ca in the bulk of the garnet, and also from that of Yb³⁺ in Yb₃Al₅O₁₂. Τhe XAFS results indicate that, (1) structural relaxation occurs around Yb³⁺ in the garnet structure; (2) the host garnet matrix exerts a major structural control on the incorporation of Yb³⁺, and (3) minor amounts of Yb³⁺ in garnet are located in structural sites and not in ill-defined defects. Received: 15 January 1998/ Revised, accepted: 21 July 1998     

Evaluating the Potential of an Airborne Laser-scanning System for Measuring Volume Changes of Glaciers

Airborne laser scanning (ALS) is well suited for the production of digital elevation models (DEM), and can, in contrast to photographic methods, be used to acquire a DEM independently of surface texture and external light sources. ALS thus serves as a tool to generate DEMs of firn areas where photogram- metric methods often fail.
The potential of an integrated ALS system – comprising a laser scanner, precise differential global positioning system, and a gyro platform – for DEM generation of firn areas is currently being assessed. The Unteraargletscher, Bernese Alps, Switzerland, has been chosen as a test site. As part of a pilot project aimed at determining the mass balance distribution of that glacier without the use of in situ information, ALS measurements were conducted in autumn 1997. The DEM derived from laser measurements is extremely sensitive to the position and attitude of the aircraft. Currently the main work focuses on assessing and improving the system's accuracy by error modelling and by the development of error-correction algorithms.
Preliminary results from Unteraargletscher are presented, and the potential of this method for the generation of DEMs of firn areas is discussed.     

Retene and resin acid concentrations in sediment profiles of a lake recovering from exposure to pulp mill effluents

The stratigraphy of resin acids (pimaric, isopimaric, sandaracopimaric, dehydroabietic and abietic acids) and base neutral compounds (retene, tetrahydroretene, dehydroabietin and fichtelite) in sediments of a lake recovering after the mill closure from exposure to effluents from sulphite pulp mill was studied. The highest concentrations of these compounds were detected 1.5 km downstream from the effluent pipe in sediment depth of 7–11 cm. This sediment layer is approximately 30 yrs old. The highest concentration of resin acids was 1100 and of retene 3300 g/g d.w. The retene concentration observed is the highest reported in the literature so far. The results imply that high concentrations of retene may be common in sediments of Finnish lakes polluted by pulp mill effluents.