Effects of Salinity Fluctuation Frequency on the Growth, Molting Rate and Hemolymph 20-Hydroxyecdysone Concentration in Juvenile Chinese shrimp, Fenneropenaeus chinensis

This experiment was conducted to examine the effects of salinity fluctuation frequency on the growth, molting rate and hemolymph 20-hydroxyecdysone (20-HE) concentration for juvenile Fenneropenaeus chinensis with an initial wet body weight of 1.115 g±0.012 g. The salinity of the control treatment (represented by D0) was 28 throughout the experiment, whereas treatments D2,D4, D6 and D8 were subjected to different salinity fluctuation frequencies of 2, 4, 6 and 8d, respectively. The range of salinity fluctuation was 4. The salinity in treatments D2, D4, D6 and D8 was kept at 28 for 2, 4, 6 and 8d, respectively; each original salinity was decreased abruptly to salinity 24, which first lasted for another 2d and was then raised to its initial value 28. This constituted a salinity fluctuation cycle and afterwards the cycle repeated. It was found that: 1) The weight gain of shrimp in treatment D4 was 202.9% and significantly higher than that in treatment D0 (P<0.05). The molting rate in treatment D2 was the lowest, while that in treatment D6 was the highest and significantly higher than those in treatments D0 and D2 (P<0.05). 2) The hemolymph 20-HE concentration of shrimps in all treatments was at low levels and increased first gradually during the inter-molt period and then increased sharply. It reached a peak value during the pre-molt stage, and then decreased abruptly during the post-molt stage when the lowest level occurred. 3) During the post-molt stage, the hemolymph 20-HE concentration in treatment D2 was 7.47pgμL-1 and significantly higher than that in treatment D0(P<0.05). There were, however, no significant differences in hemolymph 20-HE concentration among all five treatments during the inter-molt stage (P>0.05). During the pre-molt stage, the hemolymph 20-HE concentration in treatment D6 was significantly higher than that in treatment D0(P<0.05), whereas the hemolymph 20-HE concentration in treatment D2 was significantly lower than that in other treatments (P<0.05). Adequate salinity fluctuation promoted the molting rate through increasing hemolymph 20-HE concentration at the pre-molt stage.     

提高对流层天顶总延迟解算精度的新方法探讨

对流层天顶总延迟的解算精度,直接影响长基线解算的精度和大气水汽含量的计算精度。文中提出克利金内插法解算天顶总延迟的新方法,并利用南极长城站和周边IGS跟踪站的GPS数据,通过高精度解算软件GAMIT/GLOBK,解算出长城站上空的对流层天顶总延迟,将其与利用内插方法解算的天顶总延迟进行了对比分析,得出:利用该内插方法获取的南极长城站在夏季的天顶总延迟的均方差可达0.2mm,这对今后GPS高精度定位和GPS气象学应用来说,具有重要意义。     

面状矢量空间数据匹配技术研究

数据匹配技术是空间数据集成与融合中的关键技术。对面积相似度进行了描述,对面积相似度进行了几何度量上的定义,提出了基于面积相似度的数据匹配思路。最后,以面状目标为研究对象,以城市居民地的大比例尺数据为例,对基于面积相似度的面状要素数据匹配算法进行了试验与分析。     

基于双树复小波的CBERS-02B星遥感影像融合及评价

以CBERS-02星全色、多光谱图像及IKONOS多光谱图像为数据源,利用离散小波变换和双树复小波变换进行融合试验。结果表明,双树复小波变换在空间细节表现力和光谱保持方面能够较好地达到平衡,较离散小波变换更能提高图像融合质量。通过融合方法对比分析可知,02B星全色波段不仅与其多光谱波段融合能够得到信息更加丰富的图像,而且与其它传感器数据融合同样有很好的目视效果和可读性,具有较大的应用前景。     

基于GoogleSketchUp的3DGIS建模技术研究与应用

分析了GIS三维模型的特点,阐述了GIS三维建模原理及流程,在VisualC#．Net平台下,利用GoogleSketchUp实现了三维场景的可视化和查询功能。     

面向流媒体传输的空间数据变化累积模型

将流媒体技术引入到以矢量数据为主的网络GIS传输中,其关键是建立逐级精细化的多层次表达模型,并在服务器端数据预组织上建立线性索引结构。本研究针对该目标建立一种矢量数据多重表达的新模型,即变化累积模型,认为尺度空间中从粗到细的数据表达过程是一些"变化"的累积,"变化"表现为两个连续尺度表达间的差别,通过"变化"元素的逐渐增加或减少来实现渐进传输。基于该模型对面状数据渐进式传输进行研究,将多边形分级剖分为一系列凸壳或外接矩形的基础上建立变化累积模型,通过剖分元素的组合完成渐进式流媒体传输。     

两种面向地貌晕渲的光照模型比较

光照模型是影响数字地貌晕渲的一个关键因素。在参照传统晕渲着色规则的基础上,结合数字地貌晕渲的投影方式及视点、光源的设置方法,从理论上分析了Lambert漫反射模型、基于坡向光照模型的特征;分别利用规则物体和地形数据对这两种光照模型所产生的效果进行了实验和对比;结果表明漫反射模型更适合起伏较平缓地区的晕渲,基于坡向的光照模型更能突出山体的起伏特征。最后结合理论分析讨论了产生这种实验结果的原因并提出了3点改进意见。     

电子地图多尺度显示中“放大镜”效果的实现

"放大镜"效果是电子地图多尺度表达的形式之一,能够以更多的细节显示某个或某几个重点,而其他区域则以较少的细节表示。"放大镜"效果的实现需要从数学基础、数据组织、显示调度等多方面进行改造,针对上述几方面讨论了"放大镜"效果的实现方式,并进行了实验论证。     

基于空间数据挖掘技术的农用地产能核算数据库的应用研究

为提高农用地产能核算数据库的利用效率,以空间关联规则为基础,在河北省土地产能核算数据库的应用中得到提高河北省农业用地普查结果的利用效率的几条知识规则。利用现有软件,使用GIS软件进行空间数据预处理及空间关系计算。属性数据使用access管理,而关联规则挖掘算法直接应用Clementine。通过数据选取、数据预处理、数据变换、数据挖掘算法实施以及模式解释与评估,从空间数据库中提取用户感兴趣的空间模式与特征、空间与非空间数据的普遍关系及其他一些隐含在数据中的普遍的数据特征,从而得到提高土地产能核算成果利用效率的规律。     

基于CCGIS的三维城市模璎数据生产

立足于生产实际阐述了一种基于CCGIS的三维城市生产工艺,重点说明了三维城市模型数据生产流程和控制,并结合恩施三维信息查询系统为例对该生产工艺进行验证。