含矿流体混合反应与成矿作用的动力平衡模拟研究

本文在约定热液体系中成矿元素成矿速率(成矿过程中单位时间内单位体积所合成矿元素重量的变化)的基础上。借助于物质-热-化学-成矿四重全耦合的研究思路，构建了均匀热液体系、层状热液体系、岩浆侵入热液体系下成矿元素的迁移、富集、溶解与沉淀作用数值模型。模拟结果表明；(1)硫化物(H2S)和硫酸盐(SO42-)流体的混合反应是成矿热液体系中铅、锌、铁成矿元素成矿的重要控制因素；(2)均匀介质、岩浆侵入或地质构造的存在，对成矿元素在成矿流体运移的速度、流线、温度分布和成矿元素的溶解与沉淀分布都有着各自的特征．不同的成矿环境或成矿背景制约了成矿元素的迁移与富集以及矿体的产出定位。暗示成矿环境及成矿速率对热液体系中成矿元素的沉淀与溶解具重要作用；成矿流体的混合反应是成矿作用发生的重要机制之一。在成矿理论研究中必须充分考虑不同地质构造因素的约束。     

长江河源区的河水主要元素与Sr同位素来源

长江源区河水化学成分来自雨雪、蒸发盐岩、碳酸盐岩和硅酸盐岩。主要支流楚玛尔河、北麓河的主要阳离子为Na 、Ca2 和Mg2 ,占阳离子总量的97%以上.Ca Na,Mg Na,K Na的比值较低,87Sr 86Sr为0 709180±20～0 710280±11,河水成分以蒸发岩类溶解为主。发源于唐古拉山北坡的长江源头,及其支流主要阳离子为Ca2 ,Mg2 ,Na 占阳离子总量的97%以上,Ca Na,Mg Na,K Na的比值较楚玛尔河等河流高,87Sr 86Sr为0 708954±20～0 710455±18,表现为以碳酸盐岩和硅酸盐岩的溶解为主。计算表明,长江河源区河水中主要化学成分来自蒸发岩中Na 和Cl-,在河流水化学成分中占比例最大,长江河水中Cl-含量从河源区向下游明显逐渐减小,反应出河源区高寒干旱环境下河流蒸发岩的化学侵蚀作用较强的特征。     

DEVELOPMENT OF A DECISION SUPPORT SYSTEM FOR MANAGING PESTICIDE LOSSES IN AGRICULTURAL WATERSHEDS

1 INTRODUCTION Agricultural use of pesticides has been recognized as one of the important non-point pollution sources in the world, and the pesticide application to agricultural lands has led to large amounts of residues discharged into surface water through runoff (Leonard, 1990). There have been growing concerns about the fate and transport of pesticides in agricultural lands, due to the associated adverse impacts on water environment and human health (Agassi et al., 1995; Ng and Clegg…     

Focused ion beam technique and transmission electron microscope studies of microdiamonds from the Saxonian Erzgebirge, Germany

A focused ion beam of Ga ions is a relatively new technique that has been developed for microelectronic industries. Now researchers of the Earth sciences find it to be a promising tool for studying various geological materials. Using the FIB technique and an FEI Strata DB 235 dual beam system, we have successfully prepared several electron-transparent foils, which crossed μm-sized diamonds included in host minerals such as zircon and garnet from quartzofeldspathic rocks of the Saxonian Erzgebirge, Germany. Scanning and transmission electron microscopy applied to these foils revealed that the diamonds contain crystalline nanometric inclusions. These inclusions consist of minerals of known stoichiometries such as SiO₂ and Al₂SiO₅, whereas others are characterized by different combinations of Si, K, P, Ti, and Fe in the presence of oxygen (stoichiometries are not clear at this stage of research). One suite of inclusions is assumed to be represented by archerite, KH₂PO₄, which is known to be stable at pressures of 4–22 GPa, and one nanocrystal containing Pb, oxygen and carbon is interpreted to be Pb_xO_y or PbCO₃. Along with solid crystalline inclusions, the diamonds contain cavities filled by liquid/gas that escaped during sample preparation. These are associated with dislocations of diamond growth. Our data are consistent with the concept of diamond crystallization from a COH-rich multicomponent supercritical fluid and suggest that the composition of such a fluid is more consistent with a local crustal source rather than that of a mantle origin.     

Borehole Breakouts in Berea Sandstone Reveal a New Fracture Mechanism

— Vertical drilling experiments in high-porosity (22% and 25%) Berea sandstone subjected to critical true triaxial far-field stresses, in which σ _H (maximum horizontal stress) >σ _v (vertical stress) >σ _h (least horizontal stress), revealed a new and non-dilatant failure mechanism that results in thin and very long tabular borehole breakouts that have the appearance of fractures, and which counterintuitively develop orthogonally to σ _H . These breakouts are fundamentally different from those induced in crystalline rocks, as well as limestones and medium-porosity Berea sandstone. Breakouts in these rocks are typically dog-eared in shape, a result of dilatant multi-cracking tangential to the hole and subparallel to the maximum far-field horizontal stress σ _H , followed by progressive buckling and shearing of detached rock flakes created by the cracks. In the high-porosity sandstone a narrow layer of grains compacted normal to σ _H is observed just ahead of the breakout tip. This layer is nearly identical to “compaction bands” observed in the field. It is suggested that when a critical tangential stress concentration is reached along the σ _h spring line at the borehole wall, grain bonding breaks down and a compaction band is formed normal to σ _H . Debonded loose grains are expelled into the borehole, assisted by the circulating drilling fluid. As the breakout tip advances, the stress concentration ahead of it persists or may even increase, extending the compaction band, which in turn leads to breakout lengthening.     

Enhanced red fluorescence emission in the oxygen minimum zone of the Arabian Sea

 Depth profiles of fluorescence at several excitation and emission wavelengths were measured along with CTD data during the cruise So119 of RV Sonne in the Arabian Sea from 12 May to 10 June 1997. In addition to chlorophyll fluorescence from phytoplankton in the near-surface layer, the profiles in the oxygen minimum region well below the euphotic zone show enhanced red fluorescence. Red fluorescence intensity is inversely related to the oxygen concentration in intermediate and deep waters. A relationship to characteristic water masses of the region cannot be found in the data, and this holds also with chemical data such as DOC. Absorbance spectra of water samples taken in the oxygen minimum zone show an absorption band at 420 nm wavelength with about 50 nm bandwidth, much weaker than gelbstoff absorbance in the same wavelength range. The absorption band remains stable after sample filtration with 0.45 μm glass fibre filters. Hence, the size of the absorbing matter is in the range of dissolved molecules or particles much smaller than 1 μm. Fluorescence spectra of unfiltered samples with 420 nm excitation show a weak emission band at 600 nm and a more pronounced one at 660 nm wavelength. The trailing edge of the 660 nm band falls into the range of chlorophyll emission, thus giving rise to the observed depth profiles of red fluorescence in the oxygen minimum zone. Red fluorescence measured on samples remain stable during a few hours after sampling even in the presence of oxygen. It is not detectable after several weeks of sample storage in the dark and cannot be reproduced even after depletion of dissolved oxygen. Received: 22 May 2002 / Accepted: 18 February 2003 Responsible Editor: Andreas Oschlies Acknowledgements. This work was supported by a grant from the Federal Minister of Education and Technology, Bonn, within the frame work of the JGOFS Arabian Sea program. We are grateful to the captain and the crew of RV Sonne for their support. We are indebted to Mrs. Kirsten Neumann from the Institute of Marine Chemistry and Biogeochemistry of the University of Hamburg for providing the oxygen data, and to Mr. Nikolai Delling from the same institute for making the DOC and chlorophyll data available to us.     

Permeability-porosity Relationships in Rocks Subjected to Various Evolution Processes

— It is well known that there is no “universal” permeability-porosity relationship valid in all porous media. However, the evolution of permeability and porosity in rocks can be constrained provided that the processes changing the pore space are known. In this paper, we review observations of the relationship between permeability and porosity during rock evolution and interpret them in terms of creation/destruction of effectively and non-effectively conducting pore space. We focus on laboratory processes, namely, plastic compaction of aggregates, elastic-brittle deformation of granular rocks, dilatant and thermal microcracking of dense rocks, chemically driven processes, as a way to approach naturally occurring geological processes. In particular, the chemically driven processes and their corresponding evolution permeability-porosity relationships are discussed in relation to sedimentary rocks diagenesis.     

The Effect of the Development of Groundwater Deposits on Its Fluorine Content

Synthesis of regime observations of groundwater quality at deposits under operation and thermodynamic modeling of the geochemical interaction processes that govern the groundwater chemistry were used to recognize the geochemical causes and processes that bring about an increase in the groundwater fluorine content during water withdrawal accompanied by groundwater level drop and partial drying of the aquifer. The causes of the invalidity of previous forecasts are established.     

U–Pb zircon chronostratigraphy of early-Pliocene ignimbrites from La Pacana, north Chile: implications for the formation of stratified magma chambers

High spatial resolution U–Pb dates of zircons from two consanguineous ignimbrites of contrasting composition, the high-silica rhyolitic Toconao and the overlying dacitic Atana ignimbrites, erupted from La Pacana caldera, north Chile, are presented in this study. Zircons from Atana and Toconao pumice clasts yield apparent ²³⁸U/²⁰⁶Pb ages of 4.11±0.20 Ma and 4.65±0.13 Ma (2σ), respectively. These data combined with previously published geochemical and stratigraphic data, reveal that the two ignimbrites were erupted from a stratified magma chamber. The Atana zircon U–Pb ages closely agree with the eruption age of Atana previously determined by K–Ar dating (4.0±0.1 Ma) and do not support long (>1 Ma) residence times. Xenocrystic zircons were found only in the Toconao bulk ignimbrite, which were probably entrained during eruption and transport. Apparent ²³⁸U/²⁰⁶Pb zircon ages of 13 Ma in these xenocrysts provide the first evidence that the onset of felsic magmatism within the Altiplano–Puna ignimbrite province occurred approximately 3 Myr earlier than previously documented.     

Exploration and discovery in Yellowstone Lake: results from high-resolution sonar imaging, seismic reflection profiling, and submersible studies

‘No portion of the American continent is perhaps so rich in wonders as the Yellow Stone’ (F.V. Hayden, September 2, 1874)Discoveries from multi-beam sonar mapping and seismic reflection surveys of the northern, central, and West Thumb basins of Yellowstone Lake provide new insight into the extent of post-collapse volcanism and active hydrothermal processes occurring in a large lake environment above a large magma chamber. Yellowstone Lake has an irregular bottom covered with dozens of features directly related to hydrothermal, tectonic, volcanic, and sedimentary processes. Detailed bathymetric, seismic reflection, and magnetic evidence reveals that rhyolitic lava flows underlie much of Yellowstone Lake and exert fundamental control on lake bathymetry and localization of hydrothermal activity. Many previously unknown features have been identified and include over 250 hydrothermal vents, several very large (>500 m diameter) hydrothermal explosion craters, many small hydrothermal vent craters (1–200 m diameter), domed lacustrine sediments related to hydrothermal activity, elongate fissures cutting post-glacial sediments, siliceous hydrothermal spire structures, sublacustrine landslide deposits, submerged former shorelines, and a recently active graben. Sampling and observations with a submersible remotely operated vehicle confirm and extend our understanding of the identified features. Faults, fissures, hydrothermally inflated domal structures, hydrothermal explosion craters, and sublacustrine landslides constitute potentially significant geologic hazards. Toxic elements derived from hydrothermal processes also may significantly affect the Yellowstone ecosystem.