Information systems playground—the target infrastructure

The Target infrastructure has been specially built as a storage and compute infrastructure for the information systems derived from Astro-WISE. This infrastructure will be used by several applications that collaborate in the area of information systems within the Target project. It currently consists of 10 PB of storage and thousands of computational cores. The infrastructure has been constructed based on the requirements of the applications. The storage is controlled by the Global Parallel File System of IBM. This file system takes care of the required flexibility by combining storage hardware with different characteristics into a single file system. It is also very scalable, which allows the system to be extended into the future, while replacing old hardware with new technology.     

Caveats on tomographic images

Geological and geodynamic models of the mantle often rely on joint interpretations of published seismic tomography images and petrological/geochemical data. This approach tends to neglect the fundamental limitations of, and uncertainties in, seismic tomography results. These limitations and uncertainties involve theory, correcting for the crust, the lack of rays throughout much of the mantle, the difficulty in obtaining the true strength of anomalies, choice of what background model to subtract to reveal anomalies, and what cross‐sections to select for publication. The aim of this review is to provide a relatively non‐technical summary of the most important of these problems, collected together in a single paper, and presented in a form accessible to non‐seismologists. Appreciation of these issues is essential if final geodynamic models are to be robust, and required by the scientific observations.     

Shear Band Formation in Numerical Simulations Applying a Continuum Damage Rheology Model

In seismically active regions, faults nucleate, propagate, and form networks that evolve over time. To simulate crustal faulting processes, including the evolution of fault-zone properties, a rheological model must incorporate concepts such as damage rheology that describe the various stages of the seismic cycle (strain localization, subcritical crack growth and macroscopic failure) while accounting for material degradation and healing and off-fault deformation. Here we study the fundamental patterns of strain-localisation within the framework of a continuum damage rheology by performing a shear band analysis (linear instability analysis) and comparing predictions of shear band orientations with numerical results of the nonlinear problem. We find (analytically and numerically) that the angle between the shear band and the less compressive (transverse) direction is between 47° in compression tests with a strain ratio of 0.25 (highly confined compression test), and 60° for a strain ratio higher than 1.4 (axial compression and transverse extension). In addition we find that shear bands exhibit local dilation (I ₁ > 0) in a wide range of strain ratios excluding only simulations with highly confined compression (which yield compacting shear bands or non-localized deformation). Finally, we discuss the applicability of the damage model for simulating deformation in the seismogenic, brittle crust.     

Construction of Intensity–Duration–Frequency (IDF) curves for precipitation at Lubumbashi,Congo, under the hypothesis of inadequate data

Abstract

Intensity–Duration–Frequency (IDF) curves for precipitation constitute a probabilistic tool and have proven useful in water resources management. In particular, IDF curves for precipitation enable questions on the extreme character of precipitation to be answered. The construction of IDF curves for precipitation is difficult or impossible in tropical areas due to the lack of long-term extreme precipitation data. A technique is proposed to overcome this shortcoming by combining limited high-frequency information on rainfall extremes with long-term daily rainfall information. It may be regarded as an extension of Koutsoyiannis' approach. Using this technique, IDF curves for precipitation are produced for Lubumbashi in Congo.

Citation Van de Vyver, H. & Demarée, G. R. (2010) Construction of Intensity–Duration–Frequency (IDF) curves for precipitation at Lubumbashi, Congo, under the hypothesis of inadequate data. Hydrol. Sci. J. 55(4), 555–564.     

Ellipsoidal quadtrees for indexing of global geographical data

Systems for landscape visualization and geographical data handling require methods for efficient data access. Retrieval of data from large geographical databases, ten to thousands of Gbytes, is usually optimized with spatial indexing mechanisms. The simplest form of spatial indexing is achieved by dividing the database into congruent grid cells. The subsequent subdivision of the grid cells can be based on so-called quadtrees. Quadtrees for two-dimensional division and subdivision are appropriate for cartographical data. A geographical database, with objects stored in geocentric or geodetic (geographical) co-ordinates, requires indexing mechanisms that take into account the shape of the Earth. In this paper, we present a method for indexing of geographical data, named Ellipsoidal Quadtrees (EQT). In contrast to other global indexing methods, EQT is based on the Earth ellipsoid and not a spherical approximation. EQT division and subdivision make it possible to divide the Earth surface into a mesh of quadrangles with equal areas. We will demonstrate that EQT is flexible. It can be used for indexing databases of various sizes, including national and global databases. Tests on real data show that the performance of EQT is good.     

Late Devensian ice‐marginal features in the central North Sea – processes and chronology

Palaeoglaciological reconstructions of the North Sea sector of the last British Ice Sheet have, as other shelf areas, suffered from a lack of dates directly related to ice‐front positions. In the present study new high‐resolution TOPAS seismic data, bathymetric records and sediment core data from the Witch Ground Basin, central North Sea, were compiled. This compilation made it possible to map out three ice‐marginal positions, partly through identification of terminal moraines and partly through location of glacial‐fed debrisflows. The interfingering of the distal parts of the glacial‐fed debrisflows with continuous marine sedimentation enabled the development of a chronology for glacial events based on previously published and some new radiocarbon dates on marine molluscs and foraminifera. From these data it is suggested that after the central Witch Ground Basin was deglaciated at c. 27 cal. ka BP, the eastern part was inundated by glacial ice from the east in the Tampen advance at c. 21 cal. ka BP. Subsequently, the basin was inundated by ice from northeast during the Fladen 1 (c. 17.5 cal. ka BP) and the Fladen 2 (16.2 cal. ka BP) events. It should be emphasized that the Fladen 1 and 2 events, individually, may represent dynamics of relatively small lobes of glacial ice at the margin of the British Ice Sheet and that the climatic significance of these may be questioned. However, the Fladen Events probably correlate in time with the Clogher Head and Killard Point re‐advances previously documented from Ireland and the Bremanger event from off western Norway, suggesting that the British and Fennoscandian ice sheets both had major advances in their northwestern parts, close to the northwestern European seaboard, at this time.     

Novel side chain methylated and hexacyclic hopanes: Identification by synthesis, distribution in a worldwide set of coals and crude oils and use as markers for oxic depositional environments

Novel side chain methylated and hexacyclic hopanes have been identified in coals and oils from around the world. Extended hopanes (>C₃₂) with an additional methyl in the side chain (“isohopanes”) were identified by comparison with synthetic standards. The major C₃₃-C₃₅ isohopanes are 31-methylbishomohopanes, 32-methyltrishomohopanes and 33-methyltetrakishomohopanes. Extended hopanes methylated at C-29 were not detected. The 17α(H),21β(H)-31-methyltrishomohopanes show four peaks on gas chromatography because of the extra asymmetric carbon at C-31. Like regular hopanes, the isohopanes extend beyond C₃₅. Low concentrations of novel hexacyclic hopanes having 35 or more carbons were also detected in oils and coal extracts. The C₃₅ hexacyclic hopanes were identified as 29-cyclopentylhopanes. Isohopanes are released from the kerogen by hydrous pyrolysis and hydropyrolysis. The 22S/(22S + 22R) ratio for 31-methylbishomohopanes and other isohopanes is around 0.60 at equilibrium in geological samples. They isomerize slightly more slowly than regular C₃₃ hopanes. Isohop-17(21)-enes, 2α-methylisohopanes and two series of rearranged isohopanes were tentatively identified. Isohopanes can be biodegraded to form the corresponding 25-norhopanes. When 25-norhopanes are not formed, the isohopanes are much more resistant to biodegradation than regular hopanes. In biodegraded oil seeps from Greece, 30-norisohopanes were tentatively assigned. The composition and relative abundance of C₃₃ and C₃₄ isohopanes in a worldwide set of coals and crude oils was determined. Isohopanes are abundant in coal and coal-generated oils, where they can account for more than 5% of all extended hopanes, and low in abundance in oils from source rocks deposited under anoxic conditions.     

Organic geochemistry of Miocene source rocks from the Banat Depression (SE Pannonian Basin, Serbia)

The origin, depositional environment and maturity of petroleum source rocks were determined via conventional whole rock and biomarker analysis of samples from wells in the Banat Depression, where the most important Serbian oil and gas fields are located. The organic matter (OM) in organic-rich upper Tertiary siltstones and marls consists predominantly of Type II kerogen. Numerous biomarker parameters indicated mixed algal-terrestrial OM, related to a brackish or freshwater environment, whose salinity decreased from Middle to Upper Miocene. The OM was deposited under variable redox conditions, reducing to sub-oxic.The wells in the Banat Depression experienced variable high rates of rapid heating, providing an opportunity for examining the applicability of different thermal indicators in a hyperthermal basin. Rock-Eval and numerous biomarker parameters indicate that the main stage of oil generation begins at ca.130 °C and vitrinite reflectance (Rc) ca. 0.63% and reaches a maximum at ca.145-150 °C and Rc ca. 0.72-0.75%, while the late stage of oil generation starts at ca.155 °C and ca. Rc 0.78%, which corresponds, depending on geothermal gradient, to relative depths of 2100-2300 m, 2600-2900 m and 3050-3100 m, respectively. The naphthalene and phenanthrene maturity parameters proved to be less applicable than the biomarker ratios, particularly in the early to moderate maturation range. The newly proposed parameter C(14a)-homo-26-nor-17α(H)-hopane/C₃₀hopane (C₃₀HH/C₃₀H) proved applicable to a wide range of maturity.     

Assessment of MTBE biodegradation in contaminated groundwater using C and C analysis: Field and laboratory microcosm studies

Radiolabelled assays and compound-specific stable isotope analysis (CSIA) were used to assess methyl tert-butyl ether (MTBE) biodegradation in an unleaded fuel plume in a UK chalk aquifer, both in the field and in laboratory microcosm experiments. The ¹⁴C-MTBE radiorespirometry studies demonstrated widespread potential for aerobic and anaerobic MTBE biodegradation in the aquifer. However, δ¹³C compositions of MTBE in groundwater samples from the plume showed no significant ¹³C enrichment that would indicate MTBE biodegradation at the field scale. Carbon isotope enrichment during MTBE biodegradation was assessed in the microcosms when dissolved O₂ was not limiting, compared with low in situ concentrations (2 mg/L) in the aquifer, and in the absence of O₂. The microcosm experiments showed ubiquitous potential for aerobic MTBE biodegradation in the aquifer within hundreds of days. Aerobic MTBE biodegradation in the microcosms produced an enrichment of 7‰ in the MTBE δ¹³C composition and an isotope enrichment factor (ε) of −1.53‰ when dissolved O₂ was not limiting. However, for the low dissolved O₂ concentration of up to 2 mg/L that characterizes most of the MTBE plume fringe, aerobic MTBE biodegradation produced an enrichment of 0.5-0.7‰, corresponding to an ε value of −0.22‰ to −0.24‰. No anaerobic MTBE biodegradation occurred under these experimental conditions. These results suggest the existence of a complex MTBE-biodegrading community in the aquifer, which may consist of different aerobic species competing for MTBE and dissolved O₂. Under low O₂ conditions, the lower fractionating species have been shown to govern overall MTBE C-isotope fractionation during biodegradation, confirming the results of previous laboratory experiments mixing pure cultures. This implies that significant aerobic MTBE biodegradation could occur under the low dissolved O₂ concentration that typifies the reactive fringe zone of MTBE plumes, without producing detectable changes in the MTBE δ¹³C composition. This observed insensitivity of C isotope enrichment to MTBE biodegradation could lead to significant underestimation of aerobic MTBE biodegradation at field scale, with an unnecessarily pessimistic performance assessment for natural attenuation. Site-specific C isotope enrichment factors are, therefore, required to reliably quantify MTBE biodegradation, which may limit CSIA as a tool for the in situ assessment of MTBE biodegradation in groundwater using only C isotopes.