The RGS, exploration and Empire and the contested nature of surveying

In 1879, the RGS started courses in practical surveying based on the methods used by navigators. Subsequently, RGS courses, increasingly under the influence of former members of the Survey of India, changed in character. At the same time as the nature of appropriate surveying was being negotiated within the RGS, the debate over the academic nature of geography also took shape. The development of the 'new' geography reflected the conflicts within the RGS Council over the meaning of scientific geography.     

The application of GPR to barrier-lagoon sedimentation study in Boao of Hainan Island

Sedimentary successions and internal structure of the coastal barrier-lagoon system of Boao, eastern Hainan Island were studied through utilizing data from test holes and trenches and ground-penetrating-radar (GPR) profiles. During late Pleistocene, fluvial and delta plains developed over an unevenly eroded bedrock during low sea level stand, followed by the formation of littoral and lagoon facies and defined coastal barrier-lagoon-estuary system during the post-glacial uppermost Pleistocene-lower Holocene eustatic rise of the sea level, and the upper Holocene high stand. GPR results show that Yudaitan, a sandy coastal bar backed by a low-laying land (shoal) just east of the active lagoon, is a continuous, parallel and slightly-wavy reflectors indicating homogeneous sandy or sandy gravel sediments, and inclined reflectors partly caused by progradation and accumulation of beach sand and gravel. Quasi-continuous, hummocky and chaotic reflectors from the shoal of Nangang village correspond to mixed accumulation of sands and clay. This research indicates the GPR is a non-intrusive, rapid, and economical method for high-resolution profiling of subsurface sediments in sandy gravelly coast.     

Changing Rural Spaces: Deregulation and the decline of tobacco farming in the Mareeba-Dimbulah Irrigation Area,Far North Queensland

The growing of tobacco was one of the most tightly regulated industries in Australia, until deregulation in 1995. Commonwealth regulations controlled the area cultivated with tobacco, the number of growers (i.e. quota holders) and marketing arrangements for tobacco leaf. This paper begins by outlining the nature and historical development of controls in the tobacco-growing industry, and discusses how the Commonwealth government removed the industry's regulatory and protective framework in 1995. The third part of the paper examines how deregulation has impacted upon the Mareeba-Dimbulah Irrigation Area, Far North Queensland, where small farmers produced 60 per cent of Australia's tobacco in 1995. The discussion will show that the agricultural landscape once dominated by tobacco has been transformed, as local farmers abandoned growing tobacco in favour of sugar cane, avocadoes, mangoes, macadamia nuts and other small vegetable crops (e.g. navy beans, pumpkins). Tobacco, once promoted by the Queensland government as a crop to facilitate closer settlement in the Mareeba-Dimbulah Irrigation Area, will have almost vanished from the landscape by 2002.     

Employment and Socio-spatial Relations in Australia's Cultural Economy

This paper examines the significance and contribution of Australian 'creative' industry activities in light of recent debates on the emergence of the 'cultural economy of cities'. First, census employment data and business location counts are used to illustrate patterns of metropolitan primacy and concentration in the cultural industries both across states and in Sydney. Second, the specificities of the locations of cultural production, and the links between cultural industry activities and wider urban-regional change are explored in more detail. A set of observations of urban-regional change is used to demonstrate how the notion of 'cultural economy' should include complex interactions between the material activities of consumers and producers, and the discursive worlds of image makers and place marketers. Urban renewal, housing market pressures and intra-regional migration all mediate Australian experiences of the 'cultural economy'. Such interactions, in addition to key quantitative data on employment and business activity, suggest important policy considerations.     

南极考察站废弃物对贼鸥食性的影响

对南极乔治王岛菲尔德斯半岛贼鸥的食性生态进行观测与研究 ,结果表明 ,本区贼鸥的食物结构中 ,自然生态类食物百分组成 ,棕贼鸥 (C .s.lonnbergi)占 63.4% ,灰贼鸥 (C .maccormic ki)占 77.8%。同期 ,取自考察站的人类废弃物中垃圾食物的百分组成分别为 36.6%和 2 2 .3%。贼鸥食性对考察站废弃物有一定的依赖性 ,与本区环境质量下降 ,尤其考察站对废弃物的疏于管理有着直接的关系。由此表明 ,强化南极考察人员环境意识 ,建立封闭式废弃物管理系统 ,对保护南极环境有重要意义     

Economic assessment of production of flour from Prosopis alba and P. pallida pods for human food applications.

This paper presents a detailed cost accounting of the processes involved in the production of flours from the mesocarps of the fruits of Prosopis alba and P. pallida to be used in human foods. The flours from both species are similar and contain 7–8% protein, 0·8–2% fat, 26–32% total dietary fiber and 48–59% sucrose. The data were based on actual production rates in use at the Universidad de Piura pilot plant using simple machinery. Machinery hourly charges were based on equivalent rental costs in order to avoid interest charge calculations. As opposed to other analyses which only included processing costs delivered to the plant, our analysis ascribed value to the owner of the trees in order to provide incentives to plant and care for the trees. The sensitivity analyses showed that the most economically important factor was the conversion efficiency of pods into flour. When a 40% conversion efficiency, such as that which has been obtained in both Peru and Argentina was obtained, and by-product credits for high fiber containing fraction were assumed, the wholesale selling price with a 5% marketing cost and a 40% profit direct costs was estimated to be $0·66 kg⁻¹ for Peru (using a $0·40 h⁻¹ labor rate ) and $1·76 kg⁻¹ for Argentina (using a $1·5 h⁻¹ labor rate).     

Methodology for construction, calibration and validation of a national hydrological model for Denmark

An integrated groundwater/surface water hydrological model with a 1 km² grid has been constructed for Denmark covering 43,000 km². The model is composed of a relatively simple root zone component for estimating the net precipitation, a comprehensive three-dimensional groundwater component for estimating recharge to and hydraulic heads in different geological layers, and a river component for streamflow routing and calculating stream–aquifer interaction. The model was constructed on the basis of the MIKE SHE code and by utilising comprehensive national databases on geology, soil, topography, river systems, climate and hydrology. The present paper describes the modelling process for the 7330 km² island of Sjælland with emphasis on the problems experienced in combining the classical paradigms of groundwater modelling, such as inverse modelling of steady-state conditions, and catchment modelling, focussing on dynamic conditions and discharge simulation. Three model versions with different assumptions on input data and parameter values were required until the performance of the final, according to pre-defined accuracy criteria, model was evaluated as being satisfactory. The paper highlights the methodological issues related to establishment of performance criteria, parameterisation and assessment of parameter values from field data, calibration and validation test schemes. Most of the parameter values were assessed directly from field data, while about 10 ‘free’ parameters were subject to calibration using a combination of inverse steady-state groundwater modelling and manual trial-and-error dynamic groundwater/surface water modelling. Emphasising the importance of tests against independent data, the validation schemes included combinations of split-sample tests (another period) and proxy-basin tests (another area).     

The BEAM-project: prediction and assessment of mixture toxicities in the aquatic environment

Freshwater and marine ecosystems are exposed to various multi-component mixtures of pollutants. Nevertheless, most ecotoxicological research and chemicals regulation focus on hazard and exposure assessment of individual substances only, the problem of chemical mixtures in the environment is ignored to a large extent. In contrast, the assessment of combination effects has a long tradition in pharmacology, where mixtures of chemicals are specifically designed to develop new products, e.g. human and veterinary drugs or agricultural and non-agricultural pesticides. In this area, two concepts are frequently used and are thought to describe fundamental relationships between single substance and mixture effects: Independent Action (Response Addition) and Concentration Addition. The question, to what extent these concepts may also be applied in an ecotoxicological and regulatory context may be considered a research topic of major importance, as the concepts would allow to make use of already existing single substance toxicity data for the predictive assessment of mixture toxicities. Two critical knowledge gaps are identified: (a) There is a lack of environmental realism, as a huge part of our current knowledge about the applicability of the concepts is restricted to artificial situations with respect to mixture composition or biological effect assessment. (b) The knowledge on what exactly is needed for using the concepts as tools for the predictive mixture toxicity assessment is insufficient. Both gaps seriously hamper the necessary, scientifically sound consideration of mixture toxicities in a regulatory context.In this paper, the two concepts will be briefly introduced, the necessity of considering the toxicities of chemical mixtures in the environment will be demonstrated and the applicability of Independent Action and Concentration Addition as tools for the prediction and assessment of mixture toxicities will be discussed. An overview of the specific aims and approaches of the BEAM project to fill in the identified knowledge gaps is given and first results are outlined.     

Flow and fracture maps for basaltic rock deformation at high temperatures

Understanding how the strength of basaltic rock varies with the extrinsic conditions of stress state, pressure and temperature, and the intrinsic rock physical properties is fundamental to understanding the dynamics of volcanic systems. In particular it is essential to understand how rock strength at high temperatures is limited by fracture. We have collated and analysed laboratory data for basaltic rocks from over 500 rock deformation experiments and plotted these on principal stress failure maps. We have fitted an empirical flow law (Norton’s law) and a theoretical fracture criterion to these data. The principal stress failure map is a graphical representation of ductile and brittle experimental data together with flow and fracture envelopes under varying strain rate, temperature and pressure. We have used these maps to re-interpret the ductile–brittle transition in basaltic rocks at high temperatures and show, conceptually, how these failure maps can be applied to volcanic systems, using lava flows as an example.     

Imaging buried Quaternary valleys using the transient electromagnetic method

Buried Quaternary valleys in Denmark are complex structures filled with various deposits consisting primarily of glacio-lacustrine clay, till and meltwater sand, and gravel. The valleys are important geophysical targets, because they often contain significant volumes of groundwater used for public water supply. About 700 km of buried valley structures have been imaged in the western part of Denmark by the transient electromagnetic (TEM) method. The ability to map the valleys depends primarily on valley geometry, infill architecture and the resistivity of the fill sediments as well as the substratum. One-dimensional (1-D) inversion models of the TEM soundings have been used to construct contour maps of 20 m average resistivities and depth to a good conductor, which provide images for geological interpretation. Images of buried valley morphology, fill properties, infill architecture, such as cut-and-fill structures, valley distribution and valley generations, are characterized for case studies from Hornsyld, Holstebro and the Vonsild/Agtrup areas of Denmark.