A 256×256 pixel InSb FPA for SIRTF and other astronomical applications

As part of the NASA Space Infrared telescope Facility (SIRTF), a low noise multiplexer has been developed. The hybridization of this multiplexer to a high indium antimonide (InSb) photodiode array has resulted in a MWIR detector of outstanding performance. The multiplexer is made of a 256×256 array of source follower amplifiers on a 30 m square pitch. Random access binary decoders are used to access each pixel of the array, allowing any read-out scheme to be implemented. Dark current has been measured at temperatures ranging from 4K to 77K. Generation recombination currents dominate above 45K. With 100mV of reverse bias applied, less than 3×10^-17 A is typical below 50K with 8×10^-19 A (5 e^-/s) at 4K. Under the same conditions 0.25 pA was measured at 77K. Read noise has been measured as low as 186 e^- using non-correlated techniques. Detector QE is 50 to 80 % through the entire 1 to 5 m band.     

On the stability of the zodiacal cloud

The problem of the stability of the zodiacal cloud is scrutinized. The central idea of the paper sticks in the theoretical treatment of the action of the solar electromagnetic radiation on small interplanetary dust particles (IDPs). It is suggested that the virtual problem of the (in-)stability of the zodiacal cloud originated from the physically incorrect application of the Poynting-Robertson effect on IDPs. Real particles are not of spherical shape and so the braking acceleration is not proportional to -v/c. Depending on the shape (and other optical properties) of the particle, also spiralling outward from the Sun may occur.     

A comparison of type II shock speeds

Type II radio bursts are produced by material moving outwards in the solar atmosphere. Their drift in frequency allows the calculation of the radial speed with which the shock is moving- very basic information in assessing the likelihood that the shock will reach the Earth and its time of arrival. This paper compares the shock speeds derived from radio bursts observed by the Swept Frequency Interferometric Radiometer (SFIR) equipment at the US Air Force Radio Solar Telescope Network (RSTN) of observatories with those measured with the Culgoora radiospectrograph operated by IPS Radio and Space Services. The SFIR shock speeds are found to be 1.5–3.0 times larger than the Culgoora values which are consistent with earlier results. This difference appears to originate from the incorrect interpretation of events as a result of the smaller frequency range of the SFIR equipment.     

Brief description of bare essentials of surface transfer and results from simulations with the HAPEX-MOBILHY data

The Bare Essentials of Surface Transfer (BEST) land surface scheme is briefly described and the key physical parameterisations discussed. Results are then presented to illustrate how the model performs, with forcing data for HAPEX-MOBILHY, compared to a series of other schemes in the simulation of evaporation and sensible heat. The implications of the models performance, and some indications of the future development of the scheme are provided. The basic version of BEST was found to overestimate evaporation for the HAPEX-MOBILHY data, simulating 816 mm yr⁻¹ compared to a range of 550 to 816 mm yr⁻¹ for all models. A modification to the β parameterisation reduced the evaporation to 759 mm yr⁻¹ which, although an improvement, is still probably too high.     

Anatomy of individual agglutinates from a lunar highland soil

Abstract— We report results of our investigation of the relationship between values of I_s/FeO (relative concentration of nanophase Fe⁰ divided by total FeO content), glass abundance, total Fe content, and degree of digestion of <20 μm clasts for 22 individual agglutinates (250–1000 μm) from the mature Apollo 16 soil 61181 (I_s/FeO = 82 units in the <250 μm fraction). Agglutinates are important products of space weathering on the Moon, and they influence spectral observations at visible and near-IR wavelengths. Values of I_s/FeO for individual agglutinates (250–1000 μm) within this single soil span a range from 3 to 262 units which is larger than the range observed for all Apollo 16 bulk soils (～0 to 110 units). No correlation was observed between I_s/FeO and glass abundance and FeO concentrations for either agglutinitic glass or whole agglutinate particles under investigation. Our results suggest that the variation in I_s/FeO for agglutinates from a single soil may be in part a consequence of natural mixing processes on the Moon that produce highly-variable environments (with respect to surface exposure) for agglutinate formation and in part to variable kinetics of reactions in an agglutinate melt, which are influenced by a variety of factors including melt composition, temperature, impactor velocity, and quench rate. We cannot exclude but do not see evidence for other processes including addition of exotic agglutinates, micrometeoritic bombardment into compositionally-diverse microtargets, recycling of agglutinates, preferential melting of very fine soil particles, and production of nanophase Fe⁰ in amorphous rims of very fine irradiated lunar grains contributing to the observed variation of I_s/FeO.     

3D Coronal Density Reconstruction and Retrieving the Magnetic Field Structure during Solar Minimum

Measurement of the coronal magnetic field is a crucial ingredient in understanding the nature of solar coronal phenomena at all scales. We employed STEREO/COR1 data obtained during a deep minimum of solar activity in February 2008 (Carrington Rotation CR 2066) to retrieve and analyze the three-dimensional (3D) coronal electron density in the range of heights from 1.5 to 4 R_⊙ using a tomography method. With this, we qualitatively deduced structures of the coronal magnetic field. The 3D electron-density analysis is complemented by the 3D STEREO/EUVI emissivity in the 195 Å band obtained by tomography for the same CR. A global 3D MHD model of the solar corona was used to relate the reconstructed 3D density and emissivity to open/closed magnetic-field structures. We show that the density-maximum locations can serve as an indicator of current-sheet position, while the locations of the density-gradient maximum can be a reliable indicator of coronal-hole boundaries. We find that the magnetic-field configuration during CR 2066 has a tendency to become radially open at heliocentric distances greater than 2.5 R_⊙. We also find that the potential-field model with a fixed source surface is inconsistent with the boundaries between the regions with open and closed magnetic-field structures. This indicates that the assumption of the potential nature of the coronal global magnetic field is not satisfied even during the deep solar minimum. Results of our 3D density reconstruction will help to constrain solar coronal-field models and test the accuracy of the magnetic-field approximations for coronal modeling.     

A note on first-order normalizations of perturbed Keplerian systems

Techniques are developed to facilitate the transformation of a perturbed Keplerian system into Deláunay normal form at first order. The implicit dependence of the Hamiltonian on 1, the mean anomaly, through the explicit variable f, the true anomaly, or E, the eccentric anomaly, is removed through first order for terms of the form:

Beaming of Jupiter's decametric emission

Dynamic spectra of a Jovian non-Io-A storm recorded simultaneously by the Voyager 1 spacecraft and by the Kiiminki radio spectrograph are compared. It seems that the emission beam of the storm co-rotates with the planet and has a sloped leading edge, in accordance with the result of Maeda and Carr (1984).     

Comparison of analytical and numerical calculations of the first class periodic orbits

The analytic construction of the direct periodic orbits in the circular 3-body problem is given in explicit form to the linear terms in . It is shown to be in good agreement with the numerically found orbits for large values of .