Frequency of Boundary-Layer-Top Fluctuations in Convective and Stable Conditions Using Laser Remote Sensing

The planetary boundary-layer (PBL) height is determined with high temporal and altitude resolution from lidar backscatter profiles. Then, the frequencies of daytime thermal updrafts and downdrafts and of nighttime gravity waves are obtained applying a fast Fourier transform on the temporal fluctuation of the PBL height. The principal frequency components of each spectrum are related to the dominant processes occurring at the daytime and nighttime PBL top. Two groups of cases are selected for the study: one group combines daytime cases, measured in weak horizontal wind conditions and dominated by convection. The cases show higher updraft and downdraft frequencies for the shallow, convective boundary layer and lower frequencies for a deep PBL. For cases characterized by strong horizontal winds, the frequencies directly depend on the wind speed. The temporal variation of the PBL height is determined also in the likely presence of lee waves. For nighttime cases, the main frequency components in the spectra do not show a real correlation with the nocturnal PBL height. Altitude fluctuations of the top of the nocturnal boundary layer are observed even though the boundary layer is statically stable. These oscillations are associated with the wind shear effect and with buoyancy waves at the PBL top.     

Improving a tree-ring reconstruction from west-central Scandinavia: 900?years of warm-season temperatures

Dendroclimatological sampling of Scots pine (Pinus sylvestris L.) has been made in the province of J?mtland, in the west-central Scandinavian mountains, since the 1970s. The tree-ring width (TRW) chronology spans several thousand years and has been used to reconstruct June?CAugust temperatures back to 1632 bc. A maximum latewood density (MXD) dataset, covering the period ad 1107?C1827 (with gap 1292?C1315) was presented in the 1980s by Fritz Schweingruber. Here we combine these historical MXD data with recently collected MXD data covering ad 1292?C2006 into a single reconstruction of April?CSeptember temperatures for the period ad 1107?C2006. Regional curve standardization (RCS) provides more low-frequency variability than ??non-RCS?? and stronger correlation with local seasonal temperatures (51% variance explained). The MXD chronology shows a stronger relationship with temperatures than the TRW data, but the two chronologies show similar multi-decadal variations back to ad 1500. According to the MXD chronology, the period since ad 1930 and around ad 1150?C1200 were the warmest during the last 900?years. Due to large uncertainties in the early part of the combined MXD chronology, it is not possible to conclude which period was the warmest. More sampling of trees growing near the tree-line is needed to further improve the MXD chronology.     

Using paleoclimate proxy-data to select optimal realisations in an ensemble of simulations of the climate of the past millennium

We present and describe in detail the advantages and limitations of a technique that combines in an optimal way model results and proxy-data time series in order to obtain states of the climate system consistent with model physics, reconstruction of past radiative forcing and proxy records. To achieve this goal, we select among an ensemble of simulations covering the last millennium performed with a low-resolution 3-D climate model the ones that minimise a cost function. This cost function measures the misfit between model results and proxy records. In the framework of the tests performed here, an ensemble of 30 to 40 simulations appears sufficient to reach reasonable correlations between model results and reconstructions, in configurations for which a small amount of data is available as well as in data-rich areas. Preliminary applications of the technique show that it can be used to provide reconstructions of past large-scale temperature changes, complementary to the ones obtained by statistical methods. Furthermore, as model results include a representation of atmospheric and oceanic circulations, it can be used to provide insights into some amplification mechanisms responsible for past temperature changes. On the other hand, if the number of proxy records is too low, it could not be used to provide reconstructions of past changes at a regional scale.     

Chemical Mechanism Development: Laboratory Studies and Model Applications

Within the German Tropospheric Research Programme (TFS) numerous kinetic and mechanistic studies on the tropospheric reaction/degradation of the following reactants were carried out: oxygenated VOC, aromatic VOC, biogenic VOC, short-lived intermediates, such as alkoxy and alkylperoxy radicals.At the conception of the projects these selected groups were classes of VOC or intermediates for which the atmospheric oxidation mechanisms were either poorly characterised or totally unknown. The motivation for these studies was the attainment of significant improvements in our understanding of the atmospheric chemical oxidation processes of these compounds, particularly with respect to their involvement in photooxidant formation in the troposphere. In the present paper the types of experimental investigations performed and the results obtained within the various projects are briefly summarised. The major achievements are highlighted and discussed in terms of their contribution to improving our understanding of the chemical processes controlling photosmog formation in the troposphere.     

Crustal structure across the Grand Banks–Newfoundland Basin Continental Margin – II. Results from a seismic reflection profile

New multichannel seismic reflection data were collected over a 565 km transect covering the non-volcanic rifted margin of the central eastern Grand Banks and the Newfoundland Basin in the northwestern Atlantic. Three major crustal zones are interpreted from west to east over the seaward 350 km of the profile: (1) continental crust; (2) transitional basement and (3) oceanic crust. Continental crust thins over a wide zone (∼160 km) by forming a large rift basin (Carson Basin) and seaward fault block, together with a series of smaller fault blocks eastwards beneath the Salar and Newfoundland basins. Analysis of selected previous reflection profiles (Lithoprobe 85-4, 85-2 and Conrad NB-1) indicates that prominent landward-dipping reflections observed under the continental slope are a regional phenomenon. They define the landward edge of a deep serpentinized mantle layer, which underlies both extended continental crust and transitional basement. The 80-km-wide transitional basement is defined landwards by a basement high that may consist of serpentinized peridotite and seawards by a pair of basement highs of unknown crustal origin. Flat and unreflective transitional basement most likely is exhumed, serpentinized mantle, although our results do not exclude the possibility of anomalously thinned oceanic crust. A Moho reflection below interpreted oceanic crust is first observed landwards of magnetic anomaly M4, 230 km from the shelf break. Extrapolation of ages from chron M0 to the edge of interpreted oceanic crust suggests that the onset of seafloor spreading was ∼138 Ma (Valanginian) in the south (southern Newfoundland Basin) to ∼125 Ma (Barremian–Aptian boundary) in the north (Flemish Cap), comparable to those proposed for the conjugate margins.     

全球贸易自由化对中国和世界经济的影响

全球贸易自由化是当前和未来世界经济发展不可避免的趋势,2001年开始的多哈回合贸易自由化多边谈判和最近刚刚取消的“多种纤维协定”（MFA）将在全球贸易自由化进程中发挥重要的作用。本研究的目的是通过一些案例分析,揭示贸易自由化对中国和世界经济的影响。采用全球贸易模型,我们分析了MFA和在多哈回合初期欧盟、美国和凯恩斯集团分别提出的贸易自由化提案。研究结果表明,虽然取消MFA对一些国家纺织部门带来冲击,但它极大地促进了大多数国家经济的发展,改善了全球福利;多哈谈判过程中提出的各种贸易自由化提案都在不同程度上促进世界经济的发展,但其影响大小依次为凯恩斯提案、美国提案和欧盟提案;贸易自由化对经济的影响在不同部门和不同国家间存在显著差别;更大程度的贸易自由化不但符合全球共同利益,也符合中国国家利益;中国在推动全球贸易自由化过程中应发挥更积极和更大的作用。     

Rutile inclusions in garnet from a dissolution‐reprecipitation mechanism

Metamorphic garnet commonly contains needle‐like rutile inclusions as well as equant rutile inclusions that surround quartz inclusions and range in size from submicrometer to nanometer. Although the origin of these equant rutile inclusions, that is, exsolution or non‐exsolution, has important implications for petrological and tectonic processes, the crystallographic characteristics of these inclusions have rarely been studied because of the small sizes and analytical difficulties involved. Here, we report the crystallographic characteristics pertinent to the genetic origin of minute equant rutile inclusions in cloudy, nearly spherically shaped garnet domains with Ti‐depleted compositions surrounding quartz inclusions in ultrahigh‐pressure garnet from several diamondiferous Erzgebirge quartzofeldspathic gneissic rock samples. TEM analyses show that the equant rutile crystals in cloudy garnet domains are partially bounded by the low‐energy {100}_rt ± {110}_rt ± {101}_rt facets and have rather random crystallographic orientation relationships (CORs) with the garnet host, with preferential alignment of low‐energy lattice planes, for example, {100}_rt//{112}_grt, for some rutile crystals. Although the rather random CORs are unlikely to be attributed to solid‐state exsolution subjected to the stringent topotactic garnet lattice constraints, the characteristic subhedral {100}_rt ± {110}_rt ± {101}_rt crystal forms of rutile can be rationalized by a metasomatic dissolution‐reprecipitation mechanism via a fluid phase. In this scenario, the quartz+fluid inclusions in garnet were first subjected to decompression microcracking during rock exhumation, followed by dissolution of Ti‐bearing garnet matrix at the crack tips or along the crack surfaces and subsequent reprecipitation of rutile, apatite, gahnite, akdalaite, and Ti‐depleted garnet. The rapid coalescence between rutile and garnet crystals in fluid or direct attachment of rutile crystals onto the dissolving crack surfaces would then yield the rather random CORs as reported here. These results, along with previous work on rutile needles, indicate rather diverse genesis of rutile inclusions in various crystal forms, thus shedding light on the controversial exsolution origin for other inclusion suite/microstructure in minerals.     

Zircon fission‐track ages from Newfoundland—A proxy for high geothermal gradients and exhumation before opening of the Central Atlantic Ocean

Following Appalachian orogenesis, metamorphic rocks in central Newfoundland were exhumed and reburied under Tournaisian strata. New zircon fission‐track (ZFT) ages of metamorphic rocks below the Tournaisian unconformity yield post‐depositionally reset ages of 212–235 Ma indicating regional fluid‐absent reheating to at least ≥220°C. Post‐Tournaisian sedimentary thicknesses in surrounding basins show that burial alone cannot explain such temperatures, thus requiring that palaeo‐geothermal gradients increased to ≥30–40°C/km before final late Triassic accelerated cooling. We attribute these elevated palaeo‐geothermal gradients to localized thermal blanketing by insulating sediments overlying radiogenic high‐heat‐producing granitoids. Late Triassic rifting and magmatism before break up of Pangaea likely also contributed to elevated heat flow, as well as uplift, triggering late Triassic accelerated cooling and exhumation. Thermochronological ages of 240–200 Ma are seen throughout Atlantic Canada, and record rifting and basaltic magmatism on the conjugate margins of the Central Atlantic Ocean preceding the onset of oceanic spreading at ~190 Ma.     

New major element analyses of proximal tephras from the Azores and suggested correlations with cryptotephras in North-West Europe

The Azores Archipelago is one of the most active volcanic areas in the North Atlantic region. Approximately 30 eruptions have been reported over the last 600 years with some major VEI 5 (Volcanic Explosivity Index) eruptions further back in time. The geochemical composition of associated tephra-derived glass, however, is not well characterized. An Azorean origin of cryptotephras found in distal areas such as North Africa, the British Isles and Greenland has been suggested, but proximal data from the Azores are scarce and the correlations have only been tentative. These tephras have a traychtic composition, which excludes an Icelandic origin. In a previous study, we presented major element analyses of proximal tephra-derived glass from five Holocene eruptions on the Azores Islands. There is a striking geochemical similarity between tephras from volcanoes on São Miguel and Irish cryptotephras, and especially with eruptives from the Furnas volcano. Here we present new analyses of proximal tephras that confirm and strengthen a link between Furnas and cryptotephras found in south-west Ireland. We also suggest a correlation between a previously unsourced tephra found in a Swedish bog with an eruption of the Sete Cidades volcano c. 3880 a cal BP.     

The stream function and Gauss' principle of least constraint: Two useful concepts for structural geology

To the extent that rock deformation can be approximated by a two-dimensional Newtonian model, a powerful stream-function simulation method is applicable. The significance of stream functions is that velocity, strain, stress and energy derived from the same stream function satisfy automatically three basic conditions of dynamics:

1. (1) the condition of continuity.

2. (2) the Navier-Stokes equations.

3. (3) conservation of energy.

Hence we state with Jaeger: “If a stream function can be found which satisfies the boundary conditions of a dynamic model the complete solution follows.” All pertinent bits of dynamic information are implied in the stream function from which they can be directly derived, guaranteed—so to speak—not to violate the basic conditions of dynamics. Stream functions useful in structural geology are solutions of: A double-polynomial solution of max. degree 14 is developed, in which the coefficients are related controlled by the ⁴ψ = 0 constraint, and their absolute values are determined by the boundary conditions of specific models and by the condition of maximum rate of energy dissipation or maximum rate of decline of potential energy. The polynomial stream function is applied to a collapsing viscous “nappe” consisting of a thin basal layer with low viscosity on which a thicker layer with high viscosity slides due to gravitational spreading. The velocity of forward movement depends upon absolute and relative values of the following parameters: viscosity, thickness, the aspect ratio and density. The velocity of a variety of nappes with different thicknesses, aspect ratios, viscosities and densities is determined.