The southern Rhine graben: A new view of the initial phase

One of the puzzling features of the southern end of the Rhine graben is the Dinkelberg-Tabular Jura block on the eastern shoulder of the graben. It is dissected by a large number of faults, the most notable ones forming a field of narrow little grabens and half-grabens whose bordering faults converge at the level of the Middle Triassic evaporites, which points to décollement at that horizon. The little grabens were traditionally considered to be of Oligocene age, coeval with the main taphrogenesis of the Rhine graben. Two hypotheses were offered for their formation, one ascribing them to extension on the extrados of large basement folds, the other to gravity sliding on paleoslopes. Recent field work uncovered overwhelming evidence for an Eocene age of the little grabens, the time of the initial phase of Rhine graben formation. At that time there were neither large basement folds nor paleoslopes of any significance, and therefore the two hypotheses offered until now do not work. However, the map-view pattern of the field of faults offers a somewhat unusual way out of the dilemma. This pattern is most prominently displayed in the Dinkelberg area north of the Rhine. There a lane of narrow décollement grabens with a mean NNE strike is confined within the NW- striking Dinkelberg graben, which is much wider and rooted in the basement. It is also very shallow, with a subsidence on the order of 100 m. The lane of décollement grabens forms a dextral en-échelon pattern with respect to the Dinkelberg graben, suggesting stretching of the post-evaporite sequence above a basement essentially extended by strike slip. This model, though not as clearly expressed, is also compatible with the data in the rest of the Dinkelberg-Tabular Jura block. It also fits surprisingly well a theoretical model by Withjack and Scheiner (1982) that predicts a dominance of strike-slip in the marginal area of a system consisting of extension superimposed on doming.     

Capture zone,travel time,and solute-transport predictions using inverse modeling and different geological models

Six regional-scale flow models are compared to gain insight into how different representations of hydraulic-conductivity distributions affect model calibration and predictions. Deterministic geological models were used to define hydraulic-conductivity distributions in two steady-state flow models that were calibrated to heads and baseflow estimates using inverse techniques. Optimized hydraulic-conductivity estimates from the two models were used to calculate layer and model mean hydraulic-conductivity values. Despite differences in the two geological models, inverse calibration produced mean hydraulic-conductivity values for the entire model domain that are quite similar. The layer and model mean hydraulic-conductivity values were used to generate four additional flow models and forward runs were performed. All of the models adequately simulate the observed heads and total baseflow. The six flow models were used to predict the steady-state impact of a proposed well field, and the flow solutions were used in simulating particle tracking and solute transport. Results of the predictive simulations show that, for this example, simple models of heterogeneity produce capture zones similar to more complex models, but with very different travel times and breakthroughs. Inverse modeling combined with different geological models can provide a measure of capture zone and breakthrough reliability.

---

Resumen Se compara seis modelos de flujo a escala regional para conocer cómo afecta a la calibración y a la predicción del modelo diversas representaciones de la distribución de la conductividad hidráulica. Se ha utilizado modelos geológicos deterministas para definir las distribuciones de la conductividad hidráulica en dos modelos de flujo permanente, calibrados mediante técnicas inversas con niveles piezométricos y estimaciones del flujo de base. Se ha adoptado estimaciones optimizadas de la conductividad hidráulica de los dos modelos para calcular las cotas de las capas y sus conductividades hidráulicas medias. A pesar de las diferencias entre ambos modelos geológicos, con la calibración inversa se obtiene valores similares de conductividad hidráulica en todo el dominio. Estos valores de las capas y de las conductividades hidráulicas medias han servido para generar cuatro modelos adicionales de flujo y realizar predicciones. Todos los modelos simulan de forma adecuada los niveles observados y los caudales de base. Los seis modelos han sido aplicados a la predicción del impacto estacionario de un campo de pozos, y las soluciones del flujo permiten simular el transporte de partículas y de solutos. Los resultados de estas predicciones muestran que, para este ejemplo, los modelos sencillos de la heterogeneidad dan lugar a zonas de captura similares a las generadas por modelos más complejos, pero aparecen grandes diferencias en los tiempos de tránsito y en las curvas de llegada. Una combinación de modelación inversa y de modelos geológicos diferentes puede proporcionar una medida de la fiabilidad de la zona de captura y de las curvas de llegada.

---

Résumé Six modèles d'écoulement à l'échelle régionale sont comparés afin d'avoir un aperçu de la manière dont les différentes représentations de la distribution de la conductivité hydraulique affectent la calibration et les prédictions de modèles. Des modèles géologiques déterministes ont été utilisés pour définir les distributions de la conductivité hydraulique dans deux modèles d'écoulement en régime permanent qui ont été calibrés avec des estimations des charges et des écoulements de base faites par des techniques inverses. Les estimations optimisées de la conductivité hydraulique de ces deux modèles ont servi à calculer les valeurs de conductivité hydraulique moyenne des couches et du modèle. Malgré des différences entre les deux modèles géologiques, la calibration inverse a donné des valeurs de conductivité hydraulique moyenne pour le domaine complet du modèle qui sont complètement semblables. Les valeurs de la conductivité moyenne des couches et du modèle ont été utilisées pour générer quatre modèles d'écoulement supplémentaires et des traitements ont été effectués. Tous les modèles simulent correctement les charges observées et l'écoulement de base total. Les six modèles ont servi à prédire l'impact en régime permanent d'un champ captant projeté et les solutions d'écoulement ont été utilisées dans une simulation par suivi de particules et de transport de soluté. Les résultats de simulations prédictives montrent que, pour cet exemple, de simples modèles d'hétérogénéité fournissent des zones de capture semblables aux modèles plus complexes, mais pour des temps de parcours et des restitutions très différents. Une modélisation inverse combinée à différents modèles géologiques peut assurer une mesure de la zone de capture et une fiabilité de la restitution.

---

     

Velocity and attenuation in partially saturated rocks: poroelastic numerical experiments

We use a poroelastic modelling algorithm to compute numerical experiments on wave propagation in a rock sample with partial saturation using realistic fluid distribution patterns from tomography scans. Frequencies are in the range 10 to 500 kHz. The rock is a homogeneous isotropic sandstone partially filled with gas and water, which are defined by their characteristic values of viscosity, compressibility and density. We assume no mixing and that the two different pore-fills occupy different macroscopic regions. The von Kármán self-similar correlation function is used, employing different fractal parameters to model uniform and patchy fluid distributions, respectively, where effective saturation is varied in steps from full gas to full water saturation. Without resorting to additional matrix–fluid interaction mechanisms, we are able to reproduce the main features of the variation in wave velocity and attenuation with effective saturation and frequency, as those of published laboratory experiments. Furthermore, the behaviour of the attenuation peaks versus water saturation and frequency is similar to that of White's model. The conversion of primary P-wave energy into dissipating slow waves at the heterogeneities is shown to be the main mechanism for attenuating the primary wavefield. Fluid/gas patches are shown to affect attenuation more than equivalent patches in the permeability or solid-grain properties.     

A comparison of stygofauna communities inside and outside groundwater bores

Sampling stygofauna is both time consuming and labour intensive. The challenge is to get samples from as many bores as possible within a limited time. The essential assumption for this is that faunal communities inside bores are comparable and representative of the communities outside.To compare relative abundance, taxonomic richness and community composition of the fauna inside groundwater bores to the fauna of the surrounding aquifer, 20 monitoring bores in Palatinate, southwestern Germany, were sampled twice in 1 month. Initially, a sample of 4 l of water was collected from the bottom of each bore. A further sample of 51 l was collected from the groundwater surrounding the bore using a pneumatic piston pump with double packer sampler.Water chemistry inside and outside the bore was similar, but the relative amounts of sediments within the bores were higher compared to those from outside. Relative abundances of fauna inside the bores were higher than in the aquifer, but taxonomic composition was similar with the exception of the proportions of nematodes and amphipods, which were higher inside. As a result, the proportions of cyclopoids were lower inside. Higher nematode proportions are explained partially by the nearly complete extraction of bore sediment. A “habitat heterogeneity effect” states that in heterogeneous aquifers with few suitable habitats, faunal distribution is supposed to be extremely patchy. Thus, detritus accumulates in bores, attracting animals and providing “habitat islands” in the groundwater. This effect could explain the higher amphipode proportions inside the bores, which were generally more frequently populated than the surrounding groundwater. As a consequence, fauna is thought to be nearly absent from groundwater, where suitable habitats are lacking. In those sparsely populated aquifers, samples representative of the aquifer taxonomic richness and composition can only be collected by removing large volumes of water, or by sampling the bottom of bores. These findings also suggest that the use of unbaited colonisation chambers or traps in the groundwater, which are comparable with bores, would seem to be a promising approach.     

Unbaited phreatic traps: A new method of sampling stygofauna

(1) A new method of sampling stygofauna is presented, along with some data derived from applications in the field. Numerous bores were sampled for fauna, water and bacteria, down to a depth of 7.50 m. Two or 3 unbaited traps were fixed to a central pole within the bore. The traps consist of an inert plastic chamber with holes in the upper parts and gaskets near the bottom and near the lid of each trap. The content of the traps was emptied monthly using a pump.

(2) While the taxonomic composition of the trap samples seemed to be comparable to the surrounding groundwater, estimation of abundances in the traps might differ, with a potential over-estimation in the traps, in particular in sparsely populated aquifers. Detailed comparative studies on the performance of the method are, as yet, lacking.

(3) Trap data of invertebrate communities reflect hydraulic changes, and highest abundances and taxa richness were found near the water table. They decreased rapidly with depth, implying that small-scale stratified sampling is possible.

(4) The technique is cheap, reliable, simple and rapid to use, and allows simultaneous sampling of hydro-chemical, faunal and microbial samples. The method seems to be suitable for a wide range of sub-surface waters, where the water table is shallower than 8 m.

Spatial and temporal rockfall activity in a forest stand in the Swiss Prealps—A dendrogeomorphological case study

Rockfall is a major threat to settlements and transportation routes in large parts of the Alps. While protective forest stands in many locations undoubtedly reduce rockfall risk, little is known about the exact frequency and spatial distribution of rockfall activity in a given place or about how these parameters can be assessed. Therefore, the objective of the present study was to reconstruct rockfall events with dendrogeomorphological methods and to analyse the spatial and temporal rockfall activity in a subalpine forest stand. The study site is located in the transit zone of frequently passing, rather small rockfall fragments (mean diameter of 10 to 20 cm). In all, 33 stem discs from previously felled Picea abies trees found at the foot of Schwarzenberg in Diemtigtal (Swiss Prealps) were sampled, and a total number of 301 rockfall events were dated to between A.D. 1724 and 2002.Results showed that the spatial distribution of rockfall changed slightly with time, and that rockfall activity increased considerably over the last century. In contrast, rockfall magnitude presumably remained on a comparable level. The seasonal occurrence of rockfall showed a clear peak during the dormant season of trees, most probably in early spring. Furthermore, on a 10-year moving average basis, rockfall rates were positively correlated with mean annual as well as summer and winter temperatures. This means that higher temperatures resulted in increased rockfall activity. On the other hand, no correlation with annual or seasonal precipitation totals was revealed. Overall, this study provides an appropriate method for the detailed assessment of spatial and temporal variations in rockfall activity in a given place.     

Bioaccumulation of radiocaesium in Arctic seals

Seals are high trophic level feeders that bioaccumulate many contaminants to a greater degree than most lower trophic level organisms. Their trophic status in the marine food web and wide-spread distribution make seals useful sentinels of arctic environmental change. The purpose of this investigation is to document the levels and bioaccumulation potential of radiocaesium in high latitude seal species for which data have not previously been available. The study was carried out on harp, ringed, and bearded seals caught north of the island archipelago of Svalbard (82°N) in 1999. The results are then compared with previous studies in order to elucidate factors responsible for bioaccumulation in Arctic seals. Concentrations of ¹³⁷Cs were determined in muscle, liver and kidney samples from a total of 10 juvenile and one adult seal. The mean concentration in muscle samples for all animals was 0.23±0.045 Bq/kg f.w. ¹³⁷Cs concentrations in both liver and kidney samples were near detection limits (≈0.2 Bq/kg f.w.). The results are consistent with previous studies indicating low levels of radiocaesium in Arctic seals in response to a long term trend of decreasing levels of ¹³⁷Cs in the Barents Sea region. Bioconcentration factors (BCFs) estimated for seals from NE Svalbard are low, ranging from 34 to 130. Comparing these values with reported BCFs for Greenland seals from other sectors of the European Arctic, we suggest that the combination of physiological and ecological factors on radiocaesium bioaccumulation is comparable among different Arctic seal populations. The application of this work to Arctic monitoring and assessment programs is discussed.     

Gaseous and Particulate Oxidized and Reduced Nitrogen Species in the Atmospheric Boundary Layer in Scandinavia in Spring

Observations of the concentration of several nitrogen containing compounds at five rural Scandinavian sites during March–June 1993 are reported. Total nitrate (NO ₃ ^- + HNO₃) and total ammonium (NH ₄ ⁺ + NH₃) were measured by denuder and filter pack. In general the methods agree well. At all sites the particulate fraction dominated, with the largest fraction of NO ₃ ^- and the lowest of NH ₄ ⁺ at the sites which were closest to the emission sources. The fraction of NO ₃ ^- of total nitrate increased with increasing NO₂ concentrations, indicating that the nighttime conversion of NO₂ to NO ₃ ^- is an important route of formation for NO ₃ ^- . A positive correlation was found between HNO₃ and O₃ in June at all sites, while no correlation was found early in the spring. Model calculations were made with a lagrangian boundary layer photooxidant model for the whole period, and compared to the measured concentrations. The calculated ratio between mean observed and modelled daily maximum concentrations of ozone over the measurement period were within +/–10% at all sites. The models ability to describe the daily ozone maximum concentration was satisfactory with an average deviation of 19–22% from the observed concentrations. HNO₃ was underestimated by over 50% at all sites except the one closest to the emission sources. The correlation between modelled and observed concentrations was generally best for the sites with shortest transport distance from the sources of emission.