In Situ Measurement of Pinna nobilis Shells for Age and Growth Studies: A New Device

Abstract. Pinna nobilis Linnaeus 1758 is an endemic bivalve mollusc in the Mediterranean Sea, where it inhabits seagrass meadows, especially Posidonia oceanica (L.) Delile. It is the largest bivalve in the Mediterranean, reaching lengths up to 120 cm. In its natural habitat, P. nobilis lives with the anterior part of the valve buried in the seabed, attached to Posidonia rhizomes by byssus threads.
This habit makes it impossible to measure its total length directly in situ. As the only way to determine the individual age is the relationship between age and total length, several equations have been proposed to estimate total length by relating it to the unburied parts of the shell. Such measurements are essential to ecological studies that consider age, growth, and population dynamics, and that evaluate the environmental factors that affect this species.
Accurately estimating total length depends on the accuracy and precision of the method employed to measure the unburied shell parts. In this paper, we point out the lack of precision of the instruments and methods used until now; we also demonstrate the reason for this imprecision. A new device to measure unburied parts of Pinna nobilis with a precision comparable to that obtained when measuring extracted valves is described. This device is unaffected by substratum type and reduces measurement time. The latter is a very important feature, because these procedures are usually performed whilst SCUBA diving. Finally, a growth equation has been fitted to the measurements obtained with the new device from a population located in Moraira (Alicante, western Mediterranean).     

After UNCLOS: the future of international marine research

The April 1984 special issue of Marine Policy included an overview article on international marine research in the post-UNCLOS era: ‘Marine science: organizing the study of the oceans’ by Henry Charnock. We sent a galley proof of the article to Dr Hans Tambs-Lyche, formerly of ICES, for comment and we are pleased to publish his remarks.     

A new bathymetric model for the central Fram Strait

Based on data from R/V Polarstern multibeam sonar surveys between 1984 and 1997 high resolution bathymetry has been generated for the central Fram Strait. The area insonified covers approx. 36,500 km² between 78–80°N and 0–7.5°E allowing the creation of a Digital Terrain Model (DTM) with 100 m grid spacing. The DTM was utilized for contouring and generation of a new series of bathymetric charts (AWI Bathymetric Charts of the Fram Strait, AWI BCFS) at a scale of 1:100,000. The paper starts with a brief introduction to the regional setting of the study area comprising information on the local links between bathymetry, sea ice transport and water mass exchange. The bathymetric feature names used in this article and how they were chosen is outlined. Next, the input data and processing applied are described. Thereafter the newly created grid and contour data are put into context with existing data sets. Finally the main bathymetric features of the area are characterized and the generated data products available for public disposal are specified.     

Cycling the representer algorithm for variational data assimilation with a nonlinear reduced gravity ocean model

The representer method was used by [Ngodock, H.E., Jacobs, G.A., Chen, M., 2006. The representer method, the ensemble Kalman filter and the ensemble Kalman smoother: a comparison study using a nonlinear reduced gravity ocean model. Ocean Modelling 12, 378–400] in a comparison study with the ensemble Kalman filter and smoother involving a 1.5 nonlinear reduced gravity idealized ocean model simulating the Loop Current (LC) and the Loop Current eddies (LCE) in the Gulf of Mexico. It was reported that the representer method was more accurate than its ensemble counterparts, yet it had difficulties fitting the data in the last month of the 4-month assimilation window when the data density was significantly decreased. The authors attributed this failure to increased advective nonlinearities in the presence of an eddy shedding causing the tangent linear model (TLM) to become inaccurate. In a separate study [Ngodock, H.E., Smith, S.R., Jacobs, G.A., 2007. Cycling the representer algorithm for variational data assimilation with the Lorenz attractor. Monthly Weather Review 135 (2), 373–386] applied the cycling representer algorithm to the Lorenz attractor and demonstrated that the cycling solution was able to accurately fit the data within each cycle and beyond the range of accuracy of the TLM, once adjustments were made in the early cycles, thus overcoming the difficulties of the non-cycling solution. The cycling algorithm is used here in assimilation experiments with the nonlinear reduced gravity model. It is shown that the cycling solution overcomes the difficulties encountered by the non-cycling solution due to a limited time range of accuracy of the TLM. Thus, for variational assimilation applications where the TLM accuracy is limited in time, the cycling representer becomes a very powerful and attractive alternative, given that its computational cost is significantly lower than that of the non-cycling algorithm.     

A detailed magnetic study of the Reykjanes Ridge between 63°00′N and 63°40′N

Immediately southwest of Iceland, the Reykjanes Ridge consists of a series ofen échelon, elongate ridges superposed on an elevated, smooth plateau. We have interpreted a detailed magnetic study of the portion of the Reykjanes Ridge between 63°00N and 63°40N on the Icelandic insular shelf. Because the seafloor is very shallow in our survey area (100–500 m), the surface magnetic survey is equivalent to a high-sensitivity, nearbottom experiment using a deep-towed magnetometer. We have performed two-dimensional inversions of the magnetic data along profiles perpendicular to the volcanic ridges. The inversions, which yield the magnetization distribution responsible for the observed magnetic field, allow us to locate the zones of most recent volcanism and to measure spreading rates accurately. We estimate the average half spreading rate over the last 0.72 m.y. to have been 10 mm/yr within the survey area. The two-dimensional inversions allow us also to measure polarity transition widths, which provide an indirect measure of the width of the zone of crustal accretion. We find a mean transition width on the order of 4.5±1.6 km. The observed range of transition widths (2 to 8.4 km) and their mean value are characteristic of slow-spreading centers, where the locus of crustal accretion may be prone to lateral shifts depending on the availability of magmatic sources. These results suggest that, despite the unique volcanotectonic setting of the Reykjanes Ridge, the scale at which crustal accretion occurs along it may be similar to that at which it occurs along other slow-spreading centers. The polarity transition width measurements suggest a zone of crustal accretion 4–9 km wide. This value is consistent with the observed width of volcanic systems of the Reykjanes Peninsula. The magnetization amplitudes inferred from our inversions are in general agreement with NRM intensity values of dredge samples measured by De Boer (1975) and ourselves. Our thermomagnetic measurements do not support the hypothesis that the low amplitude of magnetic anomalies near Iceland is the result of a high oxidation state of the basalts. We suggest that the observed reduction in magnetic anomaly amplitude toward Iceland may be the result of an increase in the size of pillows and other igneous units.     

The GeoForschungsZentrum Potsdam/Groupe de Recherche de Gèodésie Spatiale satellite-only and combined gravity field models: EIGEN-GL04S1 and EIGEN-GL04C

The recent improvements in the Gravity Recovery And Climate Experiment (GRACE) tracking data processing at GeoForschungsZentrum Potsdam (GFZ) and Groupe de Recherche de Géodésie Spatiale (GRGS) Toulouse, the availability of newer surface gravity data sets in the Arctic, Antarctica and North-America, and the availability of a new mean sea surface height model from altimetry processing at GFZ gave rise to the generation of two new global gravity field models. The first, EIGEN-GL04S1, a satellite-only model complete to degree and order 150 in terms of spherical harmonics, was derived by combination of the latest GFZ Potsdam GRACE-only (EIGEN-GRACE04S) and GRGS Toulouse GRACE/LAGEOS (EIGEN-GL04S) mean field solutions. The second, EIGEN-GL04S1 was combined with surface gravity data from altimetry over the oceans and gravimetry over the continents to derive a new high-resolution global gravity field model called EIGEN-GL04C. This model is complete to degree and order 360 and thus resolves geoid and gravity anomalies at half- wavelengths of 55 km at the equator. A degree-dependent combination method has been applied in order to preserve the high accuracy from the GRACE satellite data in the lower frequency band of the geopotential and to form a smooth transition to the high-frequency information coming from the surface data. Compared to pre-CHAMP global high-resolution models, the accuracy was improved at a spatial resolution of 200 km (half-wavelength) by one order of magnitude to 3 cm in terms of geoid heights. The accuracy of this model (i.e. the commission error) at its full spatial resolution is estimated to be 15 cm. The model shows a reduced artificial meridional striping and an increased correlation of EIGEN-GL04C-derived geostrophic meridional currents with World Ocean Atlas 2001 (WOA01) data. These improvements have led to select EIGEN-GL04C for JASON-1 satellite altimeter data reprocessing. Electronic Supplementary Material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Environmental Factors Contributing to the Development and Demise of a Toxic Dinoflagellate (<Emphasis Type="Italic">Karlodinium veneficum</Emphasis>) Bloom in a Shallow,Eutrophic, Lagoonal Estuary

A dense bloom of the ichthyotoxic dinoflagellate Karlodinium veneficum was discovered in the Neuse River Estuary, North Carolina, on 19 October 2006 and was associated with four subsequent fish kills. Microscopic, photopigment, DNA, and toxicological techniques confirmed bloom identity and toxicity. High-resolution spatio-temporal data from ship-board and fixed automated sampling stations provided a unique opportunity to investigate the environmental conditions that initiated, maintained, and terminated the K. veneficum bloom. Bloom initiation and growth were favored by high nutrient availability and reduced dispersal during the period of declining riverine discharge after Tropical Storm Ernesto. K. veneficum out-competed other co-occurring dinoflagellates, perhaps because of the production of karlotoxins that are known to act as grazing deterrents and to facilitate mixotrophic feeding. Once the bloom was established, small-scale hydrodynamic processes, coupled with vertical migration, concentrated cells along a frontal convergence to high densities (>200,000 cells per milliliter). By 26 October 2006, wind mixing and possible nutrient stress disrupted the bloom. Release of cell-bound toxins during the bloom collapse likely accounted for the associated fish kill events where fish were reported as exhibiting typical symptoms of karlotoxin poisoning. The dynamics of this bloom underscore the tight control of harmful algal blooms by meteorological forcing, hydrology, and sediment nutrient input in this shallow lagoonal estuary.     

Provenance of the Bosnian Flysch

Sandwiched between the Adriatic Carbonate Platform and the Dinaride Ophiolite Zone, the Bosnian Flysch forms a c. 3000 m thick, intensely folded stack of Upper Jurassic to Cretaceous mixed carbonate and siliciclastic sediments in the Dinarides. New petrographic, heavy mineral, zircon U/Pb and fission-track data as well as biostratigraphic evidence allow us to reconstruct the palaeogeology of the source areas of the Bosnian Flysch basin in late Mesozoic times. Middle Jurassic intraoceanic subduction of the Neotethys was shortly followed by exhumation of the overriding oceanic plate. Trench sedimentation was controlled by a dual sediment supply from the sub-ophiolitic high-grade metamorphic soles and from the distal continental margin of the Adriatic plate. Following obduction onto Adria, from the Jurassic–Cretaceous transition onwards a vast clastic wedge (Vranduk Formation) was developed in front of the leading edge, fed by continental basement units of Adria that experienced Early Cretaceous synsedimentary cooling, by the overlying ophiolitic thrust sheets and by redeposited elements of coeval Urgonian facies reefs grown on the thrust wedge complex. Following mid-Cretaceous deformation and thermal overprint of the Vranduk Formation, the depozone migrated further towards SW and received increasing amounts of redeposited carbonate detritus released from the Adriatic Carbonate Platform margin (Ugar Formation). Subordinate siliciclastic source components indicate changing source rocks on the upper plate, with ophiolites becoming subordinate. The zone of the continental basement previously affected by the Late Jurassic–Early Cretaceous thermal imprint has been removed; instead, the basement mostly supplied detritus with a wide range of pre-Jurassic cooling ages. However, a c. 80 Ma, largely synsedimentary cooling event is also recorded by the Ugar Formation, that contrasts the predominantly Early Cretaceous cooling of the Adriatic basement and suggests, at least locally, a fast exhumation.