Strenulagus (Mammalia: Lagomorpha) from the Middle Eocene Irdin Manha Formation of the Erlian Basin, Nei Mongol, China

New material of Strenulagus solaris, a stem lagomorph, from the lower part of the Middle Eocene Irdin Manha Formation at the Irdin Manha and Huheboerhe localities, Erlian Basin, Nei Mongol, China includes remains of isolated cheek teeth, fragmentary upper incisors(d I2) and postcranial elements, reported from the species for the first time. The tarsal bones display advanced features, such as a wide calcaneofibular articulation surface and, along with an increase in hypsodonty, the new data document the early stage of lagomorph evolution in the Middle Eocene of the Erlian Basin. This finding is stratigraphically well constrained and probably predates that of the type material of S. solaris from the Khaychin Formation, Bugin-Tsav Basin, Mongolia.     

Geostatistics as a groundwater exploration planning tool: case of a brackish-saline aquifer

This paper discusses a geostatistical approach to model a groundwater aquifer in 3-D. The study aims at utilizing geostatistics as a tool for characterizing zones of better-water quality in a brackish-saline aquifer. In particular, the geostatistical model was constructed to characterize the aquifer’s salinity, represented by total dissolved solids (TDS), using logs of porosity and resistivity. Quality-checked estimated TDS vertical profiles were employed to construct and model horizontal and vertical semivariograms. Parameters of semivariogram models were used to develop both the kriging plan and the generated model. Results of this modeling process are shown in the form of horizontal salinity distribution maps. The aquifer was sliced into 20 layers, each 20 m thick, to represent its overall thickness. Salinity layers maps reflect vertical stratification of TDS concentrations in the aquifer and show that water quality deteriorates with depth and toward the northern part of the aquifer. Relatively better-quality water (TDS ≤10,000 mg/l) can be found at depths between 100 and 250 m below the aquifer’s top in both eastern and southeastern parts. Water in the same interval to the western and southwestern parts reflects the presence of higher TDS concentration. From a planning point of view, it is more feasible to target the eastern part of the aquifer for pumping and desalination purposes. In addition, the generated model could be utilized as an initial condition for flow simulation.     

Occurrence of diagenetic alunites within karst cavity infill of the Dammam Formation,Ahmadi, Kuwait: an indicator of hydrocarbon gas seeps

Alunite minerals occur as white powdery lumps and laminated coloured deposits within cavity and solution channel infill of the palaeokarst zone of the Upper Eocene Dammam Formation. This formation is exposed in a quarry located on the Al Ahmadi ridge within the Greater Burgan oil field in southern Kuwait. Field occurrences and sedimentary structures of the alunite deposits were described. Collected samples were petrographically described, and their mineralogy and geochemistry were determined using X-ray diffraction and X-ray fluorescence, respectively. Microfabrics were investigated using SEM, revealing that they are primarily composed of fibrous alunogen (hydrous aluminium sulphate) and pseudo-cubical K-alunite (hydrous potassium aluminium sulphate). Their mode of occurrence suggests a hypogenetic origin, where sulphide gases associated with hydrocarbon gases reacted with an Al-rich solution leached from clay minerals and feldspars of the cavity-fill muddy sand sediments. The hydrocarbon gases may have seeped from sub-surface petroliferous formations within the Greater Burgan oil field along vertical fractures. This study suggests that these acidic seeps may have played a role in the development of the palaeokarst zone of the Dammam Formation.     

Contribution of atmospheric processes to the degradation of air quality: case study (Sohar Industrial Area,Oman)

The impact of the air pollution generated by any industrial activities may be further aggravated if the location of the industrial area is exposed to certain atmospheric characteristics. Under such conditions, the likelihood of accumulation of local air pollution is high. This paper uses two approaches (statistical and numerical simulation) to investigate the contribution of atmospheric processes towards degradation of air quality. A case study of the two approaches was conducted over Sohar Industrial Area in the Sultanate of Oman. Measured wind data were used to account for specific atmospheric characteristics such as stagnation, ventilation, and recirculation using the statistical approach. In the second approach, numerical weather prediction model was used to simulate mesoscale circulation phenomena such as sea breeze and its contribution to the processes affecting the air quality. The study demonstrates that the atmospheric processes appear to contribute substantially to the degradation of air quality in the Sohar Industrial Area. The statistical analysis shows that the atmospheric dilution potential of Sohar Industrial Area is prone to stagnation and recirculation, rather than ventilation. Moreover, model simulation shows that there is a seasonal variation in the contribution of atmospheric processes to the degradation of the air quality at Sohar Industrial Area.     

Ground penetrating radar-based experimental simulation and signal interpretation on roadway roof separation detection

Roof separation is one of the major indications for coal mine roadway roof accidents. Therefore, it is important that efforts be made to detect roadway roof separation. Currently, the instrument used for detecting roadway roof separation is the roof-off-the-strata indicator, but its installation and use is complicated and the need is greater than can be managed. This thesis takes ground penetrating radar (GPR) as a means for roof separation detection and analyzes its feasibility for use in detecting roof separation both theoretically and experimentally. First, numerical simulation experiments on roof separation detection are carried out using GprMax2D software. The results show that it is feasible to detect roof separation by using GPR electromagnetic waves. Next, physical simulation experiment on roof separation detection is carried out using MALA GPR (RAMAC/GPR). Lastly,  the traditional image segmentation algorithm of 2D maximum between a cluster variance is improved to interpret the GPR signal. Good results were achieved using the improved algorithm to interpret detection signals of roof separation by GPR in a physical simulation experiment.     

Effect of azimuthal coverage of an earthquake on moment tensor solutions estimated by waveform inversion

The purposes of this seismological investigation are to understand and describe the effect of decrease in the azimuthal coverage of an earthquake on moment tensor solution estimated by waveform inversion. It will be very useful and worthwhile as mostly seismological networks are sparse and in case when only one or two station data are available. In this work, we have used two moderate earthquakes, 21 September 2009 (near Uttarakashi) and 3 May 2010 (near Ghansali). The waveform inversion has been carried using ISOLA software. The moment tensor is first estimated by using all station data and then by removing the stations so that the azimuthal coverage changes. The results show that strike of both nodal planes is varying with the change in azimuthal coverage. However, the slip and dip of both nodal planes remain quite stable against the variation in azimuthal coverage for these two earthquakes analyzed. The effect of decrease in the azimuthal coverage showed increase in double-couple percentage (DC %) and decrease in compensated linear vector decomposition (CLVD %). The other focal parameters such as T-axis azimuth, P-axis azimuth, T-axis plunge, and P-axis plunge have been found stable against the variation in azimuth coverage. The study also demonstrates that the moment tensor solutions obtained from waveform inversion using single station are almost similar to those estimated using maximum azimuthal coverage data and by polarity inversion.     

Recommendations for a system to photograph core segments and create stitched images of complete cores

High-resolution digital imagery of sediment cores increases researchers’ ability to examine, review, and disseminate complex and meaningful core data. The high cost of commercial core scanning systems currently limits the number of cores that are imaged. Here, we present a simple, inexpensive system that can be built in almost any laboratory environment and used to create complete core images. This system uses a stationary light source and a moving core tray (sledge) which provides for consistent lighting across multiple images. Polarized lens filters and diffuse light are used to minimize glare on the core surface. Our system also repurposes professionally engineered exercise equipment which, provides for precise core and camera movement. Once images are taken, stitching software is used to create the final core image. While there are many stitching programs on the market, none are explicitly aimed at stitching together many images in a single, straight line. We evaluated seven of the most common stitching programs and identified Hugin as the most useful for creating completed core images.     

The most frequent interfaces in olivine aggregates: the GBCD and its importance for grain boundary related processes

Rocks consist of crystal grains separated by grain boundaries that impact the bulk rock properties. Recent studies on metals and ceramics showed that the grain boundary plane orientation is more significant for grain boundary properties than other characteristics such as the sigma value or disorientation (in the Earth’s science community more frequently termed misorientation). We determined the grain boundary character distribution (GBCD) of synthetic and natural polycrystalline olivine, the most abundant mineral of Earth’s upper mantle. We show that grain boundaries of olivine preferentially contain low index planes, in agreement with recent findings on other oxides (e.g. MgO, TiO₂, Al₂O₃ etc.). Furthermore, we find evidence for a preferred orientation relationship of 90° disorientations about the [001] direction forming tilt and twist grain boundaries, as well as a preference for the 60° disorientation about the [100] axis. Our data indicate that the GBCD, which is an intrinsic property of any mineral aggregate, is fundamental for understanding and predicting grain boundary related processes.     

Zircon geochronology and geochemistry to constrain the youngest eruption events and magma evolution of the Mid-Miocene ignimbrite flare-up in the Pannonian Basin,eastern central Europe

A silicic ignimbrite flare-up episode occurred in the Pannonian Basin during the Miocene, coeval with the syn-extensional period in the region. It produced important correlation horizons in the regional stratigraphy; however, they lacked precise and accurate geochronology. Here, we used U–Pb (LA-ICP-MS and ID-TIMS) and (U–Th)/He dating of zircons to determine the eruption ages of the youngest stage of this volcanic activity and constrain the longevity of the magma storage in crustal reservoirs. Reliability of the U–Pb data is supported by (U–Th)/He zircon dating and magnetostratigraphic constraints. We distinguish four eruptive phases from 15.9 ± 0.3 to 14.1 ± 0.3 Ma, each of which possibly includes multiple eruptive events. Among these, at least two large volume eruptions (>10 km³) occurred at 14.8 ± 0.3 Ma (Demjén ignimbrite) and 14.1 ± 0.3 Ma (Harsány ignimbrite). The in situ U–Pb zircon dating shows wide age ranges (up to 700 kyr) in most of the crystal-poor pyroclastic units, containing few to no xenocrysts, which implies efficient recycling of antecrysts. We propose that long-lived silicic magma reservoirs, mostly kept as high-crystallinity mushes, have existed in the Pannonian Basin during the 16–14 Ma period. Small but significant differences in zircon, bulk rock and glass shard composition among units suggest the presence of spatially separated reservoirs, sometimes existing contemporaneously. Our results also better constrain the time frame of the main tectonic events that occurred in the Northern Pannonian Basin: We refined the upper temporal boundary (15 Ma) of the youngest counterclockwise block rotation and the beginning of a new deformation phase, which structurally characterized the onset of the youngest volcanic and sedimentary phase.