Artificial groundwater recharge to a semi-arid basin: case study of Mujib aquifer,Jordan

Mujib watershed is an important groundwater basin which is considered a major source for drinking and irrigation water in Jordan. Increased dependence on groundwater needs improved aquifer management with respect to understanding deeply recharge and discharge issues, planning rates withdrawal, and facing water quality problems arising from industrial and agricultural contamination. The efficient management of this source depends on reliable estimates of the recharge to groundwater and is needed in order to protect Mujib basin from depletion. Artificial groundwater recharge was investigated in this study as one of the important options to face water scarcity and to improve groundwater storage in the aquifer. A groundwater model based on the MODFLOW program, calibrated under both steady- and unsteady-state conditions, was used to investigate different groundwater management scenarios that aim at protecting the Mujib basin. The scenarios include variations of abstraction levels combined with different artificial groundwater recharge quantities. The possibilities of artificial groundwater recharge from existing and proposed dams as well as reclaimed municipal wastewater were investigated. Artificial recharge options considered in this study are mainly through injecting water directly to the aquifer and through infiltration from reservoir. Three scenarios were performed to predict the aquifer system response under different artificial recharge options (low, moderate, and high) which then compared with no action (recharge) scenario. The best scenario that provides a good recovery for the groundwater table and that can be feasible is founded to be by reducing current abstraction rates by 20% and implementing the moderate artificial recharge rates of 26 million(M)m³/year. The model constructed in this study helps decision makers and planners in selecting optimum management schemes suitable for such arid and semi-arid regions.     

Prediction of Land Subsidence Under Cyclic Pumping Based on Laboratory and Numerical Simulations

In this study subsidence due to groundwater withdrawal was investigated. Kerman Province in Iran is struggling with land subsidence problem due to extensive groundwater withdrawal mainly for farming. The rate and type of groundwater withdrawal has very important impact on settlement rate. In this research, effective parameters on land subsidence caused by groundwater withdrawal were determined by laboratory tests. Sampling had done up to depth of 300 m mainly with remolded specimens from Shams-abad, Nouq plain in Kerman province. Similar to the field preconsolidation pressure was applied on specimens in the laboratory. Rate of applied stress on prepared specimens was similar to effect of oscillation of groundwater level. In order to model the actual soil behavior in the laboratory, one-dimensional consolidation device (odometer) was adopted for testing. In these tests, the effect of loading caused by seasonal oscillation of groundwater table is considered by means of cyclic loading in the testing which has great effect on rate of settlements. The results of tests show that when the water table level periodically increases and decreases the amount of settlement decrease, comparing with the case when the groundwater table drop to a constant level. In order to predict the further effects of groundwater level oscillation and actual field condition on land subsidence, a finite element model based on Biots’ three-dimensional consolidation theory was developed. After calibration of finite element model with laboratory tests, this model was used for prediction the effect of groundwater level oscillation on actual field conditions.     

Geological and geotechnical aspects of underground coal mining methods within Australia

About one quarter of the coal produced in Australia is by underground mining methods. The most commonly used underground coal mining methods in Australia are longwall, and room and pillar. This paper provides a detailed review of the two methods, including their advantages and disadvantages, the major geotechnical and operational issues, and the factors that need to be considered regarding their choice, including the varying geological and geotechnical conditions suited to a particular method. Factors and issues such as capital cost, productivity, recovery, versatility and mine safety associated with the two methods are discussed and compared. The major advantages of the longwall mining method include its suitability for mining at greater depth, higher recovery, and higher production rate compared to room and pillar. The main disadvantages of the room and pillar method are the higher risks of roof and pillar collapse, higher capital costs incurred as well as lower recovery rate.     

Geochemistry of clastic sediments from Sargur supracrustals and Bababudan group,Karnataka: Implications on Archaean Proterozoic Boundary

The sediments from three stratigraphic levels in the Bababudan schist belt of Dharwar craton exhibit great diversity in major, trace and rare earth element (REE) geochemistry and thus interpreted to represent significant compositional variation in the source rocks. Detailed geological and geochemical studies have been carried out on clastic rocks constituting the Archaean Sargur supracrustals and the Bababudan belt of Dharwar craton (DC), southern India for understanding the geochemical characteristics and to define the Archaean-Proterozoic Boundary (APB/QPC) in southern India. There is significant contrast in the geochemical signatures for the sediments from these stratigraphic levles. The Sargur enclave population is characterised by slight LREE enrichment with (La/Sm)_N ranging from 1.45 to 3.58, almost flat HREE with (Gd/Yb)_N ranging from 0.65 to 1.29 with Eu/Eu* ranging from 0.49 to 0.91 suggesting mafic-ultramafic source rocks in the provenance. On the other hand, the Post QPC (PQPC) rocks are characterised by LREE enrichment with (La/Sm)_N ranging from 2.66 to 7.07, nearly flat HREE with (Gd/Yb)_N ranging from 0.58 to 0.95 and significant depletion of Eu with Eu/Eu* ranging from 0.34 to 0.85, indicating felsic province in the source area. The conglomerates and quartzites representing the QPC are showing mixed nature of these, reflecting the transitional character in depositional environment. Increase in abundance of REE, K₂O/Na₂O, Th/Sc, La/Sc, Th/U, Hf/Ta and Zr/Y ratios are characteristic of the QPC. The PQPC sediments are enriched in Th, U and HFSE like Hf, Nb, Zr and Y, and depleted in Co and Eu than their older counterparts. These geochemical signatures signify the dominance of mafic-ultramafic rocks in the source area for Sargur rocks and the existence of granite-granodiorite for PQPC clastics. Thus, the unconformity related oligomictic quartz pebble conglomerates (QPC) and quartzites at the base of Bababudan Group resembling the QPC of Witswaterand, South Africa signifies that a stable continental crust had already developed in southern India prior to ∼3.0Ga.     

Surface Water Metabolism Potential in a Tropical Estuary,Hilo Bay,Hawai’i,USA, During Storm and Non-storm Conditions

Surface water gross primary production potential (pGPP), respiration (RESP), metabolism potential (pMET), and CO₂ fluxes in Hilo Bay, Hawai’i, USA, were examined along two river plumes during storm (high-flow) and non-storm (low-flow) conditions. Significant differences in pGPP, RESP, and pMET were found between low- and high-flow conditions, with lowest rates of all processes occurring during high-flow conditions. CO₂ fluxes were influenced by metabolic processes at all but one site, with the bay’s surface waters being autotrophic and a sink for atmospheric CO₂ during low-flow conditions and less autotrophic and a source of atmospheric CO₂ during high-flow conditions. Significant differences in pMET were found between the two river plumes during low-flow conditions at spatial scales of 1.5 km; however, no differences between river plumes were found during high-flow conditions. Our study suggests that an increase in storms associated with global climate change could impact surface water metabolic dynamics of tropical estuaries.     

Analysis of the Chesapeake Bay Hypoxia Regime Shift: Insights from Two Simple Mechanistic Models

Recent studies of Chesapeake Bay hypoxia suggest higher susceptibility to hypoxia in years after the 1980s. We used two simple mechanistic models and Bayesian estimation of their parameters and prediction uncertainty to explore the nature of this regime shift. Model estimates show increasing nutrient conversion efficiency since the 1980s, with lower DO concentrations and large hypoxic volumes as a result. In earlier work, we suggested a 35% reduction from the average 1980–1990 total nitrogen load would restore the Bay to hypoxic volumes of the 1950s–1970s. With Bayesian inference, our model indicates that, if the physical and biogeochemical processes prior to the 1980s resume, the 35% reduction would result in hypoxic volume averaging 2.7 km³ in a typical year, below the average hypoxic volume of 1950s–1970s. However, if the post-1980 processes persist the 35% reduction would result in much higher hypoxic volume averaging 6.0 km³. Load reductions recommended in the 2003 agreement will likely meet dissolved oxygen attainment goals if the Bay functions as it did prior to the 1980s; however, it may not reach those goals if current processes prevail.     

Risk Prediction of Tunnel Water or Mud Inrush Based on Disaster Forewarning Grading

Water or mud inrush can not only hamper the normal construction of tunnel, but also cause severe casualties and property losses. Through the cause analysis and statistical theory, a total of 9 predictors based on 3 factors, the engineering geology, hydrogeology and construction, were put forward to control the happening of water or mud inrush. Based on the classification principles of forewarning, 3 alert levels, red, orange and yellow, were established. Using the AHP–TOPSIS evaluation theory, the risk prediction model of water or mud inrush was built based on the classification of disaster forewarning. The model was used in the diversion project of Fujian Long Jin–xi and achieved good effects.     

An optimized sequential extraction scheme for molybdenum association in environmental samples

By comparing three sequential extraction procedures, a new optimized extraction scheme for the molybdenum association in environmental samples was proposed. Five operational steps were described as exchangeable (KH₂PO₄ + K₂HPO₄: including water-soluble), associated with organic matter (NaOH), Fe–Mn oxides and/or carbonates (HCl), sulfides (H₂O₂) and residue (HNO₃ + HF + H₂O₂). An optimized extraction scheme was compared with Tessier’s procedure and the Commission of European Communities Bureau of Reference (BCR) was applied to black shales. Results showed Tessier’s procedure gave the lowest concentration values for exchangeable molybdenum and the highest values for the residual molybdenum, which could not present the efficiency of the extraction reagents. BCR’s procedure showed the highest values in oxidizable molybdenum and presented four fractions of molybdenum, which did not demonstrate the fractions of molybdenum in the black shales in detail. The optimized extraction scheme demonstrated a certain improvement on extraction efficiency over Tessier’s procedure for the lowest residual molybdenum, and revealed more featured fraction information of molybdenum in black shales than BCR’s. Therefore, after a comparison with other two extraction procedures, the optimized extraction scheme proved suitable for the molybdenum in black shales and it also showed an accurate determination of the molybdenum in the fractions and source of bioavailable Mo.     

Tide-Induced Variations in the Fatty Acid Composition of Estuarine Particulate Organic Matter

The particulate organic matter (POM) in hydrodynamically variable habitats such as the lower reaches of estuaries can change in its content and quality on very short time scales (example, hourly), and these changes can potentially influence higher-level consumers in river-estuary-marine systems. Estuarine water samples were collected hourly for 12 h downstream in a small river to evaluate the fatty acid composition of POM over a tidal cycle. Fatty acid constituents of POM collected during the flood tide were dominated by the saturated, higher plant and bacterial fatty acids, whereas unsaturated, polyunsaturated, essential, and diatom-associated fatty acids dominated the POM collected during the ebb tide. Elevated algal biomass (as indicated by high chlorophyll a concentrations), diatom, and freshness indices in the POM indicated enhanced fresh autochthonous-origin materials that dominated the mixed organic pool during the ebb tide compared to more degraded detritus during the flood tide. Tidal retention of organic matter and algal primary production were the most influential factors that differentiated the fatty acid composition of estuarine POM over the short time scale. The results of this study have important implications on the quality of POM at the time of sampling, especially in estuaries where mixed organic pools have multiple inputs and are strongly influenced by tidal cycles.