Effect of Silica Fume on Compressive Strength of Oil-Polluted Concrete in Different Marine Environments

In the present research, effect of silica fume as an additive and oil polluted sands as aggregates on compressive strength of concrete were investigated experimentally. The amount of oil in the designed mixtures was assumed to be constant and equal to 2% of the sand weight. Silica fume accounting for 10%, 15% and 20% of the weight is added to the designed mixture. After preparation and curing, concrete specimens were placed into the three different conditions: fresh, brackish and saltwater environments (submerged in fresh water, alternation of exposed in air & submerged in sea water and submerged in sea water). The result of compressive strength tests shows that the compressive strength of the specimens consisting of silica fume increases significantly in comparison with the control specimens in all three environments. The compressive strength of the concrete with 15% silica fume content was about 30% to 50% higher than that of control specimens in all tested environments under the condition of using polluted aggregates in the designed mixture.     

Investigation of Various Parameters Effect on Cerchar Abrasivity Index with PFC3D Modeling

The Cerchar test is one of the appropriate and routine tests for determining the rock abrasion; but as for the costs and pin wear measurement errors in laboratory procedures and lack of access to laboratory equipment, using of numerical modeling can lead to use of greater number of samples required during the course of mechanized excavation and reduce the costs and errors in the laboratory test. In this study, the Cerchar abrasivity test was modeled using PFC3D (Particle Flow Code in 3 Dimensions) software. In order to verify the simulation results, Cerchar laboratory test results obtained by Rostami (Rock Mech Rock Eng 47(5):1905–1919, 2014) were compared with the numerical modeling results. In modeling studies, the effects of some parameters such as apply load, test speed, pin hardness and scratching distance on pin wear were investigated. As a conclusion of the study, good agreement between modeling and experimental results was obtained for a given condition. As in the experiment with various loads in both laboratory tests and modeling, with increasing applied load the Cerchar abrasivity index also increased in the experiment with Rockwell hardness HRC (An abbreviation for Rockwell Hardness measured on the C scale. The Rockwell test determines the hardness by measuring the depth of penetration of an indenter under a large load compared to the penetration made by a preload, that on the C scale use from a indenter with 120° cone and 150 kgf load) 42.     

Isolation and characterization of alkane degrading bacteria from petroleum reservoir waste water in Iran (Kerman and Tehran provenances)

Petroleum products spill and leakage have become two major environmental challenges in Iran. Sampling was performed in the petroleum reservoir waste water of Tehran and Kerman Provinces of Iran. Alkane degrading bacteria were isolated by enrichment in a Bushnel–Hass medium, with hexadecane as sole source of carbon and energy. The isolated strains were identified by amplification of 16S rDNA gene and sequencing. Specific primers were used for identification of alkane hydroxylase gene. Fifteen alkane degrading bacteria were isolated and 8 strains were selected as powerful degradative bacteria. These 8 strains relate to Rhodococcus jostii, Stenotrophomonas maltophilia, Achromobacter piechaudii, Tsukamurella tyrosinosolvens, Pseudomonas fluorescens, Rhodococcus erythropolis, Stenotrophomonas maltophilia, Pseudomonas aeruginosa genera. The optimum concentration of hexadecane that allowed high growth was 2.5%. Gas chromatography results show that all strains can degrade approximately half of hexadecane in one week of incubation. All of the strains have alkane hydroxylase gene which are important for biodegradation. As a result, this study indicates that there is a high diversity of degradative bacteria in petroleum reservoir waste water in Iran.     

Analysis of observed and projected interannual variability in the summer season onset,length, and end dates across the Iran

Theoretical and Applied Climatology - It is very important to study the role of global warming on the variability of summer characteristics in arid and semi-arid climates such as Iran, because of...     

Probabilistic Analysis of Ground Surface Vibration Due to Train Movement, a Case Study on Tehran Metro Line 4

Ground surface vibration produced by moving train is one of the most important aspects in urban areas. The purpose of this study is the probabilistic analysis of ground surface vibration, which is generated by metro transportations. For this reason, Tehran metro line 4 is considered as a case study. In this paper, at first, a new procedure is used to simulate train dynamic load. In the second step, based on the variation of geomechanical properties and train characteristics in Tehran metro line 4, more than 60 numerical models are simulated. The results of numerical simulations are analyzed by multivariate statistical technique and an equation for prediction of peak particle velocity (PPV) in the ground surface is presented. In the next step, probabilistic analysis is done using Monte Carlo Simulation (MCS). Finally, sensitivity of input data on ground surface vibration is discussed and the impact of geomechanical properties and train characteristics on the surface vibration is considered. Based on the probabilistic analysis, PPV in the surface region of Tehran metro line 4 is <2.76?mm/s with 95?% probability.     

Fracture analysis in Tabnak hydrocarbon field of Iran by using fractal geometry and multi-fractal analysis

High gas production from the Dashtak formation of Tabnak hydrocarbon field in Fars province, Iran, indicates the presence of natural fractured reservoir whose production potential is dominated by the structural fracture. The connectivity of fractured media depends upon the power?Claw exponent and the fracture density. Fracture pattern traces obtained from the outcrops of producing formations of six different stations in Tabnak hydrocarbon field. 2D fracture network maps of Tabnak hydrocarbon field have been analyzed from their scaling properties. The fractal analysis of fracture intensity showed heterogeneous multi-fractal structure characterized by generalized dimensions. Distribution of fracture lengths exhibits power?Claw behavior with specific exponent. Scaling laws serve to make extrapolations and to study the fracture connectivity related to scale. Fracture distribution model and reservoir productivity can be estimated, which are of great interest in decision making to optimize gas production.     

Seismic design factors for RC special moment resisting frames in Dubai, UAE

This study investigates the seismic design factors for three reinforced concrete (RC) framed buildings with 4, 16 and 32-stories in Dubai, UAE utilizing nonlinear analysis. The buildings are designed according to the response spectrum procedure defined in the 2009 International Building Code (IBC’09). Two ensembles of ground motion records with 10% and 2% probability of exceedance in 50 years (10/50 and 2/50, respectively) are used. The nonlinear dynamic responses to the earthquake records are computed using IDARC-2D. Key seismic design parameters are evaluated; namely, response modification factor (R), deflection amplification factor (Cd), system overstrength factor (Ωo), and response modification factor for ductility (Rd) in addition to inelastic interstory drift. The evaluated seismic design factors are found to significantly depend on the considered ground motion (10/50 versus 2/50). Consequently, resolution to the controversy of Dubai seismicity is urged. The seismic design factors for the 2/50 records show an increase over their counterparts for the 10/50 records in the range of 200%-400%, except for the Ωo factor, which shows a mere 30% increase. Based on the observed trends, period-dependent R and Cd factors are recommended if consistent collapse probability (or collapse prevention performance) in moment frames with varying heights is to be expected.     

Hydrochemistry, mineralogy and chemical fractionation of mine and processing wastes associated with porphyry copper mines: A case study from the Sarcheshmeh mine, SE Iran

The Sarcheshmeh is one of the largest Oligo-Miocene porphyry Cu deposits in the world. Comparative hydrochemical, mineralogical and chemical fractionation associated with mining efflorescence salts and processing wastes of this mine are discussed. Hydrochemical results showed that rock waste dumps, reject wastes and old impoundments of tailings are the main sources of acid mine drainage waters (AMD) that contain potentially toxic metals such as Cd, Co, Cu, Mn, Ni and Zn as well as Al. Episodic fluxes of highly contaminated acidic waters were produced in a tailings dam over a short period of time. Secondary soluble minerals provide important controls on the quality of AMD produced, especially in old, dry tailings impoundments. Secondary sulfate minerals such as gypsum, magnesiocopiapite, hydronium jarosite, kornelite and coquimbite were found in rock waste drainages and in old weathered reject wastes. Highly soluble secondary minerals such as gypsum, eriochalcite, and bonattite are also observed in an evaporative layer on old tailings impoundments. Chemical fractionation patterns of potentially toxic elements showed that the geochemical behavior of metals is primarily controlled by the mineralogical composition of waste samples. Elements such as Co, Cr, Cu, Mn, Ni and Zn are readily released into the water soluble fraction from efflorescence salts associated with rock waste drainages, as well as from the evaporative layer of old tailings. Potentially toxic elements, such as As, Mo and Pb, are principally adsorbed or co-precipitated with amorphous and crystalline Fe oxides, but they may also be associated with oxidizing, primary sulfides and residual fractions. Following the development of the dammed tailings pond, the secondary minerals were dissolved, producing acidic waters contaminated by Al (154 mg L⁻¹), Cu (150 mg L⁻¹), Cd (0.31 m gL⁻¹), Co (2.13 mg L⁻¹), Mn (73.7 mg L⁻¹), Ni (1.74 mg L⁻¹), Zn (20.3 mg L⁻¹) and Cl (1690 mg L⁻¹). Therefore, the potential use of recycled water from the Sarcheshmenh dammed tailings pond is diminished by the presence of corrosive ions like Cl⁻ in highly acidic fluids that promote corrosion of pipes and pumps in the water recycling system.     

Seasonal Changes in Mayfly Communities and Abundance in Relation to Water Physicochemistry in Two Rivers at Different Elevations in Northern Peninsular Malaysia

A field study was performed at rivers in Gunung Jerai forest reserve(Kedah,Malaysia) to assess seasonal changes in mayfly community structure and abundance in relation to altitude and water physicochemistry.Rivers at lower(Batu Hampar River) and higher(Teroi River) elevations were visited through dry and wet seasons in September 2007 to August 2008.Monthly visits were made to 20 sites on each river,and water and aquatic insects were sampled using D-pond aquatic nets.Water was warmer,more acid,and more turbid in Teroi River during wet season.Ammonia was the only nutrient exhibiting significant seasonal variations(greater during wet season).Chemical oxygen demand content was higher in Teroi River where biochemical oxygen demand content was low during wet season.Species richness was higher in Batu Hampar River,but displayed seasonal variations only in Teroi River.Among the eight families encountered,Baetidae was the commonest.Baetid abundance was usually high during wet season,and those belonging to the dominant genus(Baetis) were more abundant in Teroi River.Heptageniidae was the second commonest family;its predominant genus,Thalerospyrus was more abundant in Teroi River during dry season.Caenidae,Leptophlebiidae and Oligoneuriidae were only found in Batu Hampar River where their abundances peaked during dry season,i.e.,Habrophlebiodes sp.and Isonychia sp.Ephemerellidae and Teloganodidae occurred only in Teroi River,with the first found only during dry season.Mayflies were recorded under very distinct physicochemical conditions,illustrating their potential usefulness for assessing water quality.Caenids,leptophlebids,oligoneurids ephemerellids and teloganodids seem to be particularly sensitive to temperature,acidity,turbidity,chemical oxygen demand and biochemical oxygen demand,parameters that varied with river altitude.