Application of spectrum–area fractal model to identify of geochemical anomalies based on soil data in Kahang porphyry-type Cu deposit,Iran

The aim of this study is to identify geochemical anomalies using power spectrum–area (S–A) method based on the grade values of Cu, Mo and Au in 2709 soil samples collected from Kahang porphyry-type Cu deposit, Central Iran. S–A log–log plots indicated that there are three stages of Cu, Mo and Au enrichment. The third enrichment was considered as the main stage for the presence of Cu, Mo and Au at the concentrations above 416 ppm, 23 ppm and 71 ppb, respectively. Elemental anomalies are positively associated with monzo–granite–diorite and breccias units which are in the central and western parts of the deposit. The anomalies are located within the potassic, phyllic and argillic alteration types and also there is the positive correlation between the anomalies and nearing faults in the studied area. The results obtained via fractal model were interpreted accordingly to incorporate the information for the mineralized areas including detailed geological map, structural analysis and alterations. The results show that S–A multifractal modeling is applicable for anomalies delineation based on soil data.     

The use of three physico-chemical methods in the study of the organic matter associated with the sedimentary phosphorites in Djebel Onk Basin, Algeria

The study of the organic matter (OM) associated with the phosphate ore of Kef Essennoun deposit (Djebel Onk mining basin, Algeria) was with a view to determine the decomposition degree of the OM within the pellets and the matrix, and the conditions of diagenesis. The sedimentary phosphates of this deposit are constituted of sub-rounded, phosphate-rich grains (pellets) dispersed in a surrounding, much poorer than pellets in P, matrix (or gangue). The survey of the OM associated with both pellets and matrix used several types of analyses: scanning electron microscopy (SEM), scanning electron microscope with energy-dispersive X-ray analysis, Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy. The results show the OM, dispersed approximately homogeneously, in the form of large flat particles, within the gangue and within the phosphatic pellets in the form of small particles. The O/C ratio showed that the OM is more oxidised in the matrix than within the pellets. The oxidation increased with the phosphatisation rate of the pellets and more with the carbonation rate of the matrix, but it decreased with the silicification degree in the siliceous carbonated matrix. Two major functional classes were distinguished within pellets: aliphatic and oxygenated ones, the latter being fundamentally present in humic OM. The presence and abundance of these humic compounds in pelletal phosphorites are known from the 1980s and considered as witnessing a formation of apatite in a strictly closed environment, inside the pellet.     

Ground roll attenuation using the S and x-f-k transforms

Ground roll, which is characterized by low frequency and high amplitude, is an old seismic data processing problem in land‐based seismic acquisition. Common techniques for ground roll attenuation are frequency filtering, f‐k or velocity filtering and a type of f‐k filtering based on the time‐offset windowed Fourier transform. These techniques assume that the seismic signal is stationary. In this study we utilized the S, x‐f‐k and t‐f‐k transforms as alternative methods to the Fourier transform. The S transform is a type of time‐frequency transform that provides frequency‐dependent resolution while maintaining a direct relationship with the Fourier spectrum. Application of a filter based on the S transform to land seismic shot records attenuates ground roll in a time‐frequency domain. The t‐f‐k and x‐f‐k transforms are approaches to localize the apparent velocity panel of a seismic record in time and offset domains, respectively. These transforms provide a convenient way to define offset or time‐varying reject zones on the separate f‐k panel at different offsets or times.     

Shake table study on an ordinary low‐rise building seismically isolated with SU‐FREIs (stable unbonded‐fiber reinforced elastomeric isolators)

This paper reports on the investigation of novel fiber reinforced elastomeric isolator (FREI) bearings, which do not have thick end plates, and are used in an unbonded application. Owing to the stable lateral load‐displacement response exhibited by the unbonded FREI bearings, the proposed bearings are referred to as stable unbonded (SU)‐FREIs. A shake table test program was conducted on a two‐story test‐structure having well‐defined elastic response characteristics. Compared with the results for the corresponding fixed base (FB) structure, the peak response values, distribution of lateral response throughout the height of the structure, and response time histories of the tested base isolated (BI) structure indicate that significantly improved response can be achieved. This study clearly indicates that SU‐FREI bearings can provide an effective seismic isolation system. Copyright © 2009 John Wiley & Sons, Ltd.     

绿洲耕地变化趋势及其驱动力——塔里木盆地南部策勒绿洲为例

以多年的野外实地调查资料和统计资料,分析了塔里木盆地南部策勒绿洲50年以来耕地面积变化的总体趋势、空间差异和驱动因子。基于GPS现场定位,应用GIS进行空间分析,通过建立多元回归模型,最终对该绿洲2010年和2020年的耕地数量进行了初步的预测。分析结果表明社会经济发展动态、农业科技进步和水土资源的限制等3大类因素是影响耕地数量的3个主成分,其结果将为进一步研究整个塔里木盆地南部绿洲耕地变化提供借鉴,为合理利用和保护耕地、为干旱区可持续发展提供科学依据。     

Imagery in the Presence of Turbulence Using Slit Aperture Telescope With Partial Adaptive Corrections

The objective of this communication is to study and totest numerically the concept of partial adaptive correction with arotating Slit Aperture Telescope (SAT). After a brief summary of theprinciple of image reconstruction with the rotating SAT operating withoutthe atmospheric turbulence, we describe the simulations of imagereconstruction when a partial atmospheric correction is performed in onedimension only, along the long axis of the rotating SAT. Thereconstruction algorithm performs the inversion of the Radon transform.The SAT can use a small adaptive optics system with far fewer actuatorsthan conventional two-dimensional devices, but a relatively high degree ofone-dimensional correction is needed to recover a satisfactorytwo-dimensional image. The effect of additive noise on the reconstructedimage is also investigated.     

Geochemical Prospectivity Mapping Through a Feature Extraction–Selection Classification Scheme

Natural Resources Research - Machine learning (ML) schemes can enhance success in geochemical prospectivity mapping. This study has examined the effectiveness of several feature extraction or...     

A novel spatial index using spatial analyses and hierarchical fuzzy expert system for obtaining green TOD: a case study in Tehran city

Sustainable development is a vital and challenging factor for managing urban growth smartly. This factor contains three main components, namely economic growth, ecological protection and social justice. Green Transit-Oriented Development (GTOD) is a consummate planning approach in line with those components. Implementation of GTOD in an urban area is underpinned by its quantification. Therefore, a quantitative spatial index based on several indicators related to TOD and Green urbanism concepts should be developed. In this study, Geo-spatial Information Science and hierarchical fuzzy inference system (HFIS) were employed to calculate the indicators and aggregate them, respectively. In order to showcase the feasibility of the proposed method, it was implemented in a case study area in the City of Tehran, Iran. The result of this method is an integrated spatial GTOD index, which measures the neighbourhoods’ GTOD levels. These measurements specify weaknesses and strengths of neighbourhoods’ factors. Therefore, this index helps decision-makers to plan neighbourhoods based on land use and public transit views. Additionally, the HFIS method helps decision-makers to consider criteria and indicators with their inherent uncertainties and aggregate them with much fewer rules. For evaluating the results, the developed GTOD index was assessed with municipal action planning and attraction maps. According to the outcomes of the assessment, it is concluded that the proposed method is adequately robust and efficient for smart and sustainable urban planning.     

Antenna design and implementation for the future space Ultra-Long wavelength radio telescope

In radio astronomy, the Ultra-Long Wavelengths (ULW) regime of longer than 10 m (frequencies below 30 MHz), remains the last virtually unexplored window of the celestial electromagnetic spectrum. The strength of the science case for extending radio astronomy into the ULW window is growing. However, the opaqueness of the Earth’s ionosphere makes ULW observations by ground-based facilities practically impossible. Furthermore, the ULW spectrum is full of anthropogenic radio frequency interference (RFI). The only radical solution for both problems is in placing an ULW astronomy facility in space. We present a concept of a key element of a space-borne ULW array facility, an antenna that addresses radio astronomical specifications. A tripole–type antenna and amplifier are analysed as a solution for ULW implementation. A receiver system with a low power dissipation is discussed as well. The active antenna is optimized to operate at the noise level defined by the celestial emission in the frequency band 1 ? 30 MHz. Field experiments with a prototype tripole antenna enabled estimates of the system noise temperature. They indicated that the proposed concept meets the requirements of a space-borne ULW array facility.