Heavy minerals and the evolution of the modern Nile

Heavy mineral analysis is a useful tool in tracing the changes in the hydrographic setting of the Nile through time. Analyses by the writer and others are presented to differentiate between a former Nilotic system, a Proto-Nile, and the modern Nile system, and to demonstrate the changes undergone by the modern Nile.The Proto-Nile was almost totally dependent upon discharge from equatorial and sub-equatorial tributaries in East Africa and from local Sudano-Egyptian affluents. The modern Nile system, in contrast, is dominated by contributions from the Blue Nile and the Atbara River, which drain the Ethiopian Plateau. The discharge of these rivers is governed by the monsoonal rains which are responsible for the summer floods in the Lower Nile Basin. It has been generally believed that this riverine system is very recent, perhaps not much older than 20,000 years. The evidence presented in this paper indicates that the Modern Nile system was well established by the later part of the Middle Pleistocene. In its early stage, the modern Nile was characterized by greater contributions from the non-Ethiopian East African and Sudano-Egyptian tributaries than at present.     

Prediction of the sawing quality of Marmarit stones using the capability of artificial neural network

The sawing rate is one of the most significant and effective parameters in extracting building stones via diamond wire sawing. This parameter designates the capability of diamond wire sawing for sawing different stones; in addition, the parameter gives rise to economical considerations for quarry designers. In this study, the existent relations between stone geotechnical parameters and the sawing rate of stones via diamond wire sawing were analyzed using regression and correlation coefficient as well as the collected data from Marmarit stone quarries. Moreover, we estimated the sawing rate of Marmarit using the dimensional stone rock mass rating (DSRMR); upon comparison of the data obtained from DSRMR our pre‐collected data on quarries, we did not gain satisfactory results from DSRMR, hence we used artificial neural network (ANN). The results showed that the percentage of Silica, the coefficient of water absorption, the uniaxial compressive strength (UCS), and abrasive hardness are the proper parameters for creating the ANN. Discontinuities have the least effects possible on diamond wire sawing. Having given the training possibility of the ANN, and its ability to evaluate relations among input parameters, the ANN, which was being trained with Marmarit's traits, was an accurate network for estimating diamond wire sawing in Marmarit quarries, although it could not generalize this network for other stones such as Chini and Crystal. Copyright © 2011 John Wiley & Sons, Ltd.     

Lithospheric extension and the opening of the Red Sea: sediment-basalt relationships in Yemen*

This paper analyses new field and radiometric age data on the timing of extension, sedimentation and magmatism related to the opening of the Red Sea. The first evidence of widespread extension is found in synsedimentary fissures in the fluviatile to shallow marine Tawilah Formation of Cretaceous to early Tertiary age. The first indication of magmatism is the eruption of alkaline basalts (43.5–21.2 Ma) on to marine and non-marine sandstones of lower to middle Tertiary age. The lack of an angular unconformity at the sediment-basalt contact, over a period of 25 Myr, corroborates a diachronous relationship between the Tawilah sandstones and the Yemen Volcanics. These data also indicate that the onset of volcanism in Yemen was in the Eocene, as is the case in Ethiopia and Saudi Arabia. A passive rifting model is supported by early extension and sedimentation followed by syn- and post-tectonic magmatism.     

Hydrocarbon pollution of the Mediterranean coastline of Morocco

Organic geochemical study of hydrocarbon pollution of the Mediterranean coastline of Morocco (Tangier-Nador) was performed during March–April 2002. It corresponds to a preliminary work representing an initial assessment of oil contamination of Moroccan coast.Three coastal sites corresponding to Tangier, Tetouan and Nador, representing the main built-up area of this marine region, were selected for superficial sediments, water and organism sampling. Results showed high contamination levels in these three selected sites, known as the most exposed areas to urban and industrial discharges. The maximal contamination corresponding to the sum of non-aromatic (NAH) and polycyclic aromatic hydrocarbons (PAH) encountered in sediment samples was about 553 μg/g (dw). Nevertheless, even a small city agglomeration without any industrial activity showed high values reaching 370 μg/g (dw), which confirm the important hydrocarbons input coming from discharges of fishing ships and oil transporting tankers.The obtained results from this survey reflecting in part the important amounts drained via effluents toward the Moroccan Mediterranean coasts, presented to the concerned authorities drove to the realization of the project of treatment of the wastewater.They later expect to lower rates by 50%, which is still insufficient for a fragile ecosystem such as the Mediterranean and sensitive to anthropogenic effects.     

The meteoritic origin of Tutankhamun's iron dagger blade

Scholars have long discussed the introduction and spread of iron metallurgy in different civilizations. The sporadic use of iron has been reported in the Eastern Mediterranean area from the late Neolithic period to the Bronze Age. Despite the rare existence of smelted iron, it is generally assumed that early iron objects were produced from meteoritic iron. Nevertheless, the methods of working the metal, its use, and diffusion are contentious issues compromised by lack of detailed analysis. Since its discovery in 1925, the meteoritic origin of the iron dagger blade from the sarcophagus of the ancient Egyptian King Tutankhamun (14th C. BCE) has been the subject of debate and previous analyses yielded controversial results. We show that the composition of the blade (Fe plus 10.8 wt% Ni and 0.58 wt% Co), accurately determined through portable x‐ray fluorescence spectrometry, strongly supports its meteoritic origin. In agreement with recent results of metallographic analysis of ancient iron artifacts from Gerzeh, our study confirms that ancient Egyptians attributed great value to meteoritic iron for the production of precious objects. Moreover, the high manufacturing quality of Tutankhamun's dagger blade, in comparison with other simple‐shaped meteoritic iron artifacts, suggests a significant mastery of ironworking in Tutankhamun's time.     

Interactive visualization of the largest radioastronomy cubes

3D visualization is an important data analysis and knowledge discovery tool, however, interactive visualization of large 3D astronomical datasets poses a challenge for many existing data visualization packages. We present a solution to interactively visualize larger-than-memory 3D astronomical data cubes by utilizing a heterogeneous cluster of CPUs and GPUs. The system partitions the data volume into smaller sub-volumes that are distributed over the rendering workstations. A GPU-based ray casting volume rendering is performed to generate images for each sub-volume, which are composited to generate the whole volume output, and returned to the user. Datasets including the HI Parkes All Sky Survey (HIPASS – 12 GB) southern sky and the Galactic All Sky Survey (GASS – 26 GB) data cubes were used to demonstrate our framework’s performance. The framework can render the GASS data cube with a maximum render time <0.3 s with 1024 × 1024 pixels output resolution using three rendering workstations and eight GPUs. Our framework will scale to visualize larger datasets, even of Terabyte order, if proper hardware infrastructure is available.     

Uplift of symmetrical anchor plates by using grid-fixed reinforced reinforcement in cohesionless soil

Uplift response of symmetrical anchor plates with and without grid fixed reinforced （GFR） reinforcement was evaluated in model tests and numerical simulations by Plaxis. Many variations of reinforcement layers were used to reinforce the sandy soil over symmetrical anchor plates. In the current research, different factors such as relative density of sand, embedment ratios, and various GFR parameters including size, number of layers, and the proximity of the layer to the symmetrical anchor plate were investigated in a scale model. The failure mechanism and the associated rupture surface were observed and evaluated. GFR, a tied up system made of fiber reinforcement polymer （FRP） strips and end balls, was connected to the geosynthetic material and anchored into the soil. Test results showed that using GFR reinforcement significantly improved the uplift capacity of anchor plates. It was found that the inclusion of one layer of GFR, which rested directly on the top of the anchor plate, was more effective in enhancing the anchor capacity itself than other methods. It was found that by including GFR the uplift response was improved by 29%. Multi layers of GFR proved more effective in enhancing the uplift capacity than a single GFR reinforcement. This is due to the additional anchorage provided by the GFR at each level of reinforcement. In general, the results show that the uplift capacity of symmetrical anchor plates in loose and dense sand can be significantly increased by the inclusion of GFR. It was also observed that the inclusion of GFR reduced the requirement for a large L/D ratio to achieve the required uplift capacity. The laboratory and numerical analysis results are found to be in agreement in terms of breakout factor and failure mechanism pattern.