Flow dynamics at the origin of thin clayey sand lacustrine turbidites: Examples from Lake Hazar,Turkey

Turbidity currents and their deposits can be investigated using several methods, i.e. direct monitoring, physical and numerical modelling, sediment cores and outcrops. The present study focused on thin clayey sand turbidites found in Lake Hazar (Turkey) occurring in eleven clusters of closely spaced thin beds. Depositional processes and sources for three of those eleven clusters are studied at three coring sites. Bathymetrical data and seismic reflection profiles are used to understand the specific geomorphology of each site. X‐ray, thin sections and CT scan imagery combined with grain‐size, geochemical and mineralogical measurements on the cores allow characterization of the turbidites. Turbidites included in each cluster were produced by remobilization of surficial slope sediment, a process identified in very few studies worldwide. Three types of turbidites are distinguished and compared with deposits obtained in flume studies published in the literature. Type 1 is made of an ungraded clayey silt layer issued from a cohesive flow. Type 2 is composed of a partially graded clayey sand layer overlain by a mud cap, attributed to a transitional flow. Type 3 corresponds to a graded clayey sand layer overlain by a mud cap issued from a turbulence‐dominated flow. While the published experimental studies show that turbulence is damped by cohesion for low clay content, type 3 deposits of this study show evidence for a turbulence‐dominated mechanism despite their high clay content. This divergence may in part relate to input variables, such as water chemistry and clay mineralogy, that are not routinely considered in experimental studies. Furthermore, the large sedimentological variety observed in the turbidites from one coring site to another is related to the evolution of a sediment flow within a field‐scale basin made of a complex physiography that cannot be tackled by flume experiments.     

Tunisian landfill leachate treatment using <Emphasis Type="Italic">Chlorella</Emphasis> sp.: effective factors and microalgae strain performance

The potential of the autoclaved Tunisian landfill leachate treatment using microalgae (Chlorella sp.) cultivation was investigated in this study. Landfill leachate was collected from Borj Chakir landfill, Tunisia. A full factorial experimental design 2² was proposed to study the effects of the incubation time and leachate ratio factors on the organic matter removal expressed in chemical oxygen demand (COD) and ammoniacal nitrogen (NH₄─N) and on the biological response of Chlorella sp. expressed by the cell density and chlorophyll content. All experiments were batch runs at ambient temperature (25 ± 2 °C). The Chlorella sp. biomass and chlorophyll a concentrations of 1.2 and 5.32 mg L^?1, respectively, were obtained with 10% leachate spike ratio. The obtained results showed that up to 90% of the ammoniacal nitrogen in landfill leachate was removed in 10% leachate ratio spiked medium with a residual concentration of 40 mg L^?1. The maximum COD removal rate reached 60% within 13 days of incubation time indicating that microalgae consortium was quite effective for treating landfill leachate organic contaminants. Furthermore, with the 10% leachate ratio spiked medium, the maximum lipid productivity was 4.74 mg L^?1 d^?1. The present study provides valuable information for potential adaptation of microalgae culture and its contribution for the treatment of Tunisian landfill leachate.     

Biostratigraphy and seismic data analysis to detect the sequence stratigraphic depositional environment of the Miocene succession: Gulf of Suez (Egypt)

This work comprises a study of the sequence stratigraphy, seismic-facies analysis, biostratigraphy and depositional environments of the northern part of the Gulf of Suez, Egypt, using a set of 24 3D seismic profiles, composite logs and sonic logs from ten wells. The syn-rift formations in the studied ten wells are described lithologically and interpreted based on investigating two seismic profiles. Biostratigraphically, the Miocene fossils are identified to correlate the five planktonic foraminiferal biozones in the examined boreholes (RB-A1, RB-B1, RB-B3, EE85-2 and RB-C1). The sequence stratigraphic analysis suggests that the Miocene succession can be subdivided into two major third order depositional sequences (S1 and S2) separated by the three major sequence boundaries (DSB1, DSB2 and DSB3).     

An original semi‐discrete approach to assess gas conductivity of concrete structures

For civil engineering structures with a tightness role, structural permeability is a key issue. In this context, this paper presents a new proposition of a numerical modelling of leakage rate through a cracked concrete structure undergoing mode I cracking. The mechanical state of the material, considered in the framework of continuum mechanics based on finite element modelling, is described by means of the stress‐based nonlocal damage model which takes into account the stress state and provides realistic local mechanical fields. A semi‐discrete method based on the strong discontinuity approach to estimate crack opening is then considered in the post‐treatment phase. Using a Poiseuille's like relation, the coupling between the mechanical state of the material and its dry gas conductivity is performed. For validation purposes, an original experimental campaign is conducted on a dry concrete disc loaded in a splitting setup. During the loading, gas conductivity and digital image correlation analysis are performed. The comparison with the 3D experimental mechanical global response highlights the performance of the mechanical model. The comparison between crack openings measured by digital image correlation and estimated by the strong discontinuity method shows a good agreement. Finally, the results of the semi‐discrete approach coupled with the gas conductivity compared with experimental data show a good estimation of the structural conductivity. Consequently, if the mechanical problem is well modelled at the global scale, then the proposed approach provides good estimation of gas conductivity. Copyright © 2016 John Wiley & Sons, Ltd.     

Wrench structural deformation in Ras Al Hilal-Al Athrun area, NE Libya: a new contribution in Northern Al Jabal Al Akhdar Belt

Al Jabal Al Akhdar is a NE/SW- to ENE/WSW-trending mobile part in Northern Cyrenaica province and is considered a large sedimentary belt in northeast Libya. Ras Al Hilal-Al Athrun area is situated in the northern part of this belt and is covered by Upper Cretaceous–Tertiary sedimentary successions with small outcrops of Quaternary deposits. Unmappable and very restricted thin layers of Palaeocene rocks are also encountered, but still under debate whether they are formed in situ or represent allochthonous remnants of Palaeocene age. The Upper Cretaceous rocks form low-lying to unmappable exposures and occupy the core of a major WSW-plunging anticline. To the west, south, and southeast, they are flanked by high-relief Eocene, Oligocene, and Lower Miocene rocks. Detailed structural analyses indicated structural inversion during Late Cretaceous–Miocene times in response to a right lateral compressional shear. The structural pattern is themed by the development of an E–W major shear zone that confines inside a system of wrench tectonics proceeded elsewhere by transpression. The deformation within this system revealed three phases of consistent ductile and brittle structures (D₁, D₂, and D₃) conformable with three main tectonic stages during Late Cretaceous, Eocene, and Oligocene–Early Miocene times. Quaternary deposits, however, showed at a local scale some of brittle structures accommodated with such deformation and thus reflect the continuity of wrenching post-the Miocene. D₁ deformation is manifested, in Late Cretaceous, via pure wrenching to convergent wrenching and formation of common E- to ENE-plunging folds. These folds are minor, tight, overturned, upright, and recumbent. They are accompanied with WNW–ESE to E–W dextral and N–S sinistral strike-slip faults, reverse to thrust faults and pop-up or flower structures. D₂ deformation initiated at the end of Lutetian (Middle Eocene) by wrenching and elsewhere transpression then enhanced by the development of minor ENE–WSW to E–W asymmetric, close, and, rarely, recumbent folds as well as rejuvenation of the Late Cretaceous strike-slip faults and formation of minor NNW–SSE normal faults. At the end of Eocene, D₂ led to localization of the movement within E–W major shear zone, formation of the early stage of the WSW-plunging Ras Al Hilal major anticline, preservation of the contemporaneity (at a major scale) between the synthetic WNW–ESE to E–W and ENE–WSW strike-slip faults and antithetic N–S strike-slip faults, and continuity of the NW–SE normal faults. D₃ deformation is continued, during the Oligocene-Early Miocene, with the appearance of a spectacular feature of the major anticline and reactivation along the E–W shear zone and the preexisting faults. Estimating stress directions assumed an acted principal horizontal stress from the NNW (N33°W) direction.     

Multivariate statistical analyses of the groundwater system in Darb El-Arbaein, Southwestern Desert, Egypt

In Darb El-Arbaein, the groundwater is the only water resource. The aquifer system starts from Paleozoic–Mesozoic to Upper Cretaceous sandstone rocks. They overlay the basement rocks and the aquifer is confined. In the present research, the performance of the statistical analyses to classify groundwater samples depending on their chemical characters has been tested. The hydrogeological and hydrogeochemical data of 92 groundwater samples were obtained from the General Authority for Rehabilitation Projects and Agricultural Development authority in northern, central, and southern Darb El-Arbaein. A robust classification scheme for partitioning groundwater chemistry into homogeneous groups was an important tool for the characterization of Nubian sandstone aquifer. We test the performance of the many available graphical and statistical methodologies used to classify water samples. R-mode, Q-mode, correlation analysis, and principal component analysis were investigated. All the methods were discussed and compared as to their ability to cluster, ease of use, and ease of interpretation. The correlation investigation clarifies the relationship among the lithologic, hydrogeologic, and anthropogenic factors. Factor investigation revealed three factors, namely, the evaporation process–agricultural impact–lithogenic dissolution, the hydrogeological characteristics of the aquifer system, and the surface meteoric water that recharge the aquifer system. Two main clusters that subdivided into four subclusters were identified in the groundwater system based on hydrogeological and hydrogeochemical data. They reflect the impact of geomedia, hydrogeology, geographic position, and agricultural wastewater. The groundwater is undersaturated with respect to most selected minerals. The groundwater was supersaturated with respect to iron minerals in northern and southern Darb El-Arbaein. The partial pressure of the groundwater versus saturation index of calcite shows the gradual change in PCO₂ from atmospheric to the present aquifer pressures.     

阿尔泰额尔齐斯带东段酸性岩墙群地球化学特征及其地质意义

野外地质调查发现在阿尔泰南缘额尔齐斯构造带东段、额尔齐斯活动断裂与富蕴-锡泊渡断裂之间发育了一套未变形的酸性岩墙群.岩墙群侵位于海西期片麻岩化花岗岩和上石炭统深变质的额尔齐斯组岩层中,薄片鉴定和岩石地球化学分析确定为具有细晶结构的流纹斑岩.岩石的SiO2含量为70.9%～75.38%,K2O＋Na2O含量为7.55%～8.99%;大部分样品Na2O＞K2O,里特曼指数值为1.8～2.5之间,Al2O3=12.80%～14.53%,A/CNK=0.9～1.1,NK/A=0.7～0.9,具有准铝质-弱过铝质、低镁、高钾钠、低钙和锶、高（Fe）mol/（Mg）mol特点,具A型花岗岩类特点,属于亚碱性脉岩.岩石轻稀土富集,大离子亲石元素相对富集,具有明显的中等负铕异常,壳源特征明显.锆石U-Pb二次粒子微探针测年显示岩墙群形成于277～286Ma.推断岩墙是阿尔泰海西期造山运动结束后,在拉张构造环境下的地壳局部熔融产物.     

Late Proterozoic older granitoids from the North Eastern desert of Egypt: petrogenesis and geodynamic implications

Major, trace, and REE data for three localities of calc?Calkaline older granitoid rocks exposed in the north Eastern Desert of Egypt are presented. These rocks were selected to cover wide compositional spectrum of the Egyptian older granitoid varieties. They are petrographically represented by granodiorite, tonalite, quartz?Cdiorite, and quartz?Cmonzodiorite. The rocks are comparable with the peraluminous, unfractionated calc?Calkaline suites and fall within the volcanic arc and I-type granite fields. So, they can be regarded as belonging to the volcanic arc collision stage (665?C614?Ma). The granitoids are geochemically similar to other rocks recorded from continental margin arc-systems being exhibit light-REE enriched patterns with variable but chiefly positive Eu anomaly. The latter has reverse relationship with the ??REE, which was attributed to the fractionation of hornblende during partial melting. These patterns are comparable with models involving partial melting of amphibolitic source. This source must represent basalts, gabbros, or volcanics of an island arc system that were transformed to the level of the island arc crust during continental growth where the P?CT conditions are suitable for partial melting. Thus, it is plausible that the studied rocks were derived by partial melting of LREE-enriched, garnet-free, and amphibole-bearing (i.e., hydrated) mafic source. Wadi Milaha granitoids are consistent with the derivation by a high degree of partial melting (30?C40%) of amphibolite protolith in the deep crust. However, the two other localities (Wadi Umm Anab and West Gharib) are matching with 20?C30% partial melting. Within each locality, variation in rock types from granodiorite to tonalite is said to be dominated by variable degree of restite separation during magma ascent. The high water and volatile contents in Wadi Milaha granitoids allowed higher degree of partial melting (30?C40%). Moreover, the lower volatile contents in the other two localities (Wadi Umm Anab and West Gharib) gave lower degrees of partial melting (20?C30%). These processes may resemble important geodynamic features of the Arabo-Nubian Shield evolution in the north Eastern Desert of Egypt.     

Deep neural network application for 4D seismic inversion to changes in pressure and saturation: Optimizing the use of synthetic training datasets

In this work, we tackle the challenge of quantitative estimation of reservoir dynamic property variations during a period of production, directly from four-dimensional seismic data in the amplitude domain. We employ a deep neural network to invert four-dimensional seismic amplitude maps to the simultaneous changes in pressure, water and gas saturations. The method is applied to a real field data case, where, as is common in such applications, the data measured at the wells are insufficient for properly training deep neural networks, thus, the network is trained on synthetic data. Training on synthetic data offers much freedom in designing a training dataset, therefore, it is important to understand the impact of the data distribution on the inversion results. To define the best way to construct a synthetic training dataset, we perform a study on four different approaches to populating the training set making remarks on data sizes, network generality and the impact of physics-based constraints. Using the results of a reservoir simulation model to populate our training datasets, we demonstrate the benefits of restricting training samples to fluid flow consistent combinations in the dynamic reservoir property domain. With this the network learns the physical correlations present in the training set, incorporating this information into the inference process, which allows it to make inferences on properties to which the seismic data are most uncertain. Additionally, we demonstrate the importance of applying regularization techniques such as adding noise to the synthetic data for training and show a possibility of estimating uncertainties in the inversion results by training multiple networks.     

Net radiation over the Aswan High Dam Lake

Summary Net radiation is an essential parameter for estimating evaporation from large water surfaces by energy balance method. Net radiation has been measured for the first time over the Aswan High Dam Lake on the Nile River for 132 days including warm and cold seasons. A high multiple linear correlation coefficient of 0.98 was obtained between the measured net radiation on the one hand and the global solar radiation measured at Aswan and the difference between water and air temperatures measured over the Lake on the other hand.Seven different empirical formulae for estimating the effective outgoing radiation have been applied on the average data measured over the Lake for days of clear sky. It has been found that the Swinbank formula is the best one suitable for the location of the Aswan High Dam Lake.With 2 Figures