Oxygen isotopic and chemical compositions of cosmic spherules collected from the Antarctic ice sheet: Implications for their precursor materials

Bulk chemical compositions and oxygen isotopic compositions were analyzed for 48 stony cosmic spherules (melted micrometeorites) collected from the Antarctic ice sheet using electron- and ion-microprobes. No clear correlation was found between their isotopic compositions and textures. The oxygen isotopic compositions showed an extremely wide range from −28‰ to +93‰ in δ¹⁸O and from −21‰ to +13‰ in Δ¹⁷O. In δ¹⁸O-δ¹⁷O space, most samples (38 out of 48) plot close to the terrestrial fractionation line, but 7 samples plot along the carbonaceous chondrite anhydrous mineral (CCAM) line. Three samples plot well above the terrestrial fractionation line. One of these has a Δ¹⁷O of +13‰, the largest value ever found in solar system materials. One possible precursor for this spherule could be ¹⁶O-poor planetary material that is still unknown as a meteorite. The majority of the remaining spherules are thought to be related to carbonaceous chondrites.     

Validation of ADEOS-II GLI ocean color products using in-situ observations

The Global Imager (GLI) aboard the Advanced Earth Observing Satellite-II (ADEOS-II) made global observations from 2 April 2003 to 24 October 2003. In cooperation with several institutes and scientists, we obtained quality controlled match-ups between GLI products and in-situ data, 116 for chlorophyll-a concentration (CHLA), 249 for normalized water-leaving radiance (nLw) at 443 nm, and 201 for aerosol optical thickness at 865 nm (Tau_865) and Angstrom exponent between 520 and 865 nm (Angstrom). We evaluated the GLI ocean color products and investigated the causes of errors using the match-ups. The median absolute percentage differences (MedPD) between GLI and in-situ data were 14.1–35.7% for nLws at 380–565 nm, 52.5–74.8% nLws at 625–680 nm, 47.6% for Tau_865, 46.2% for Angstrom, and 46.6% for CHLA, values that are comparable to the ocean-color products of other sensors. We found that some errors in GLI products are correlated with observational conditions; nLw values were underestimated when nLw at 680 nm was high, CHLA was underestimated in absorptive aerosol conditions, and Tau_865 was overestimated in sunglint regions. The error correlations indicate that we need to improve the retrievals of the optical properties of absorptive aerosols and seawater and sea surface reflection for further applications, including coastal monitoring and the combined use of products from multiple sensors.     

Iron, manganese and aluminum in upper waters of the western South Pacific Ocean and its adjacent seas

Total dissolvable iron, manganese and aluminum distributions in upper waters were determined in the western South Pacific, Solomon Sea, Coral Sea, and Tasman Sea. In these oceanic regions, the surface aluminum distributions well reflect the atmospheric deposition pattern of mineral dust in the western South Pacific reported previously. Surface manganese distributions derive mainly from lateral transportation from the coastal sediments of western tropical islands. Compared to Mn and Al, the Fe distributions reflect the nutrient cycle in upper waters. Iron limitation over the vast South Pacific, as revealed by physiological features of phytoplankton, seems to be caused by low atmospheric dust deposition and low Fe:N ratios in deep waters. In the western South Pacific, with its unique geographic and oceanographic settings, the local sources of trace metals might considerably affect their biogeochemical cycles.     

Biological organic carbon export estimated from the annual carbon budget observed in the surface waters of the western subarctic and subtropical North Pacific Ocean from 2004 to 2013

The annual flux of biologically produced organic carbon from surface waters is equivalent to annual net community production (NCP) at a steady state and equals the export of particulate and dissolved organic carbon (POC and DOC, respectively) to the ocean interior. NCP was estimated from carbon budgets of salinity-normalized dissolved inorganic carbon (nDIC) inventories at two time-series stations in the western subarctic (K2) and subtropical (S1) North Pacific Ocean. By using quasi-monthly biogeochemical observations from 2004 to 2013, monthly mean nDIC inventories were integrated from the surface to the annual maximum mixed layer depth and corrected for changes due to net air–sea CO₂ exchange, net CaCO₃ production, vertical diffusion from the upper thermocline, and horizontal advection. The annual organic carbon flux at K2 (1.49 ± 0.42 mol m^?2 year^?1) was lower than S1 (2.81 ± 0.53 mol m^?2 year^?1) (p < 0.001 based on t test). These fluxes consist of three components: vertically exported POC fluxes (K2: 1.43 mol m^?2 year^?1; S1: 2.49 mol m^?2 year^?1), vertical diffusive DOC fluxes (K2: 0.03 mol m^?2 year^?1; S1: 0.25 mol m^?2 year^?1), and suspended POC fluxes (K2: 0.03 mol m^?2 year^?1; S1: 0.07 mol m^?2 year^?1). The estimated POC export flux at K2 was comparable to the sum of the POC flux observed with drifting sediment traps and active carbon flux exported by migrating zooplankton. The export fluxes at both stations were higher than those reported at other time-series sites (ALOHA, the Bermuda Atlantic Time-series Study, and Ocean Station Papa).     

Spatial variations of rare earth elements in north pacific surface water

The concentration of dissolved rare earth elements (REE) were determined at 47 stations in the North Pacific surface waters. Combining with other previous data, we present the surface REE distribution in the North Pacific and discuss the controlling factors. The surface concentrations increase toward the high latitude and continental margin (e.g. [Nd] > 10 pmol kg⁻¹) from the central North Pacific (e.g. [Nd] < 5 pmol kg⁻¹). The North Pacific Deep Water-normalized REE patterns are varied, indicating that two or more factors contribute to the REE distribution. We examined four factors making the regional variation of surface REE concentrations mainly; a) particle scavenging, b) atmospheric dust input, c) vertical mixing and d) lateral transport from the coastal region. Flux calculations for Nd showed that the influence of atmospheric dust was less significant than the vertical input even in the western upwelling zone. Moreover, the longitudinal and latitudinal transitions of surface REE seem to reflect the lateral supply from the coastal areas. We constructed the diagram of surface Er/Lu and Er/Yb molar ratios in order to assess the origin and the input processes of the surface REE. Both molar ratios showed increasing trend toward PEW (Er/Lu (>10.5) and Er/Yb (>1.4)) from PSUW (Er/Lu (>7) and Er/Yb (>1.2)). The high Er/Lu and Er/Yb ratios in PEW indicate that the lateral supply of terrestrial materials from the coastal area is possibly the important factor in PEW, because only weathering and dissolution of rocks can explain such high Er/Lu and Er/Yb ratios to our knowledge.     

EXPERIMENTAL STUDY ON THE RELATION OF BED MORPHOLOGY WITH SURFACE FLOW IN MEANDER CHANNELS

1 INTRODUCTION The plane shape of a river channel is very important for river improvement planning, because it must allow floodwater to flow off safely. Natural rivers wind from side to side, which creates meandering forms. From the history of river impro…     

Features and formation processes of multiple deposition layers from the 2004 Indian Ocean Tsunami at Ban Nam Kem,southern Thailand

Multiple‐layered tsunami deposits have been frequently reported from coastal stratigraphic sequences, but the formation processes of these layers remain uncertain. A terrestrial sandy deposit formed by the 2004 Indian Ocean Tsunami was investigated at Ban Nam Kem, southern Thailand. Four internal layers induced by two tsunami waves were identified in the tsunami deposit. Sedimentary structures indicated that two units were formed by run‐up currents caused by the tsunami and the other two units were deposited by the backwash flows. Graded bedding was common in the layers, but inverse grading was observed at limited intervals on the surveyed transects. The characteristics of the multiple‐layered tsunami deposit vary remarkably over a very short distance (<1 m) in response to the local topography. Remarkable asymmetries in thickness and grain‐size distribution are recognized between the run‐up and backwash flow deposits. On the basis of the interpretation of sedimentary structures, the formation process of the multiple‐layered tsunami deposit observed in this study can be explained in a schematic model as the modification of the ideal tsunami sequence by local erosion and the asymmetric hydraulic properties of tsunami waves, such as the maximum shear velocity and the heterogeneity of the flow velocity field.     

Numerical model and flume experiments of single- and two-layered hillslope flow related to slope failure

A hillslope flow model is developed considering 3D saturated and unsaturated flow of water during rainfall events. A finite difference-based numerical model of hillslope flow processes is developed. Four different experiments are done to see the effects of a single- and double-layered soil in pore-water pressure dynamics and slope failure. Results from the numerical model are verified with experimental results. The numerical and experimental values of the pore-water pressure and moisture contents are in good agreement. The results show that the hillslope heterogeneity caused by multiple layers of soil has greater influence on hillslope pore-pressure dynamics and slope failure patterns. The depth of slope failure shows high dependency on layering characteristics of the soil slope and pattern of rainfall. The proposed model provides a perspective on failure mechanism of a single- or double-layered slope under rainfall infiltration.     

Key species of hermatypic coral for reef formation in the northwest Pacific during Holocene sea-level change

Cores from Holocene reefs provided a growth history and species-level identification of corals and demonstrated the most important reef builders during the formation stage. This knowledge is important to determine a principle for reef formation and to provide preservation plans in the near future. A biological and sedimentological study of sediment cores recovered from the Palau Islands and Yoron Island, northwest Pacific, revealed four major facies: corymbose Acropora, arborescent Acropora, massive Porites, and detritus. Species-level observations show that arborescent Acropora (A. muricata and A. intermedia) contributed to reef growth under low- to moderate-energy conditions, whereas corymbose and tabular Acropora (A. digitifera, A. hyacinthus, and A. robusta/A. abrotanoides) and I. palifera were key species for reef formation under high-energy conditions during Holocene sea-level rise and the ensuing period of sea-level stability. Once sea level had stabilized, massive Porites became restricted to areas subjected to low-energy, turbid conditions. These key species are successful corals because the ecological strategy is rapid growth, determinate growth, a high degree of colony integration, strongly resistant to wave action, and rapid local dispersion via fragmentation. Moreover, the western boundary current (Kuroshio) flows along the reefs in the northwest Pacific and it is easy for key species to distribute throughout the region during the period of Holocene sea-level rise and stabilization. These features are a principle for reef formation during sea-level changes. These key species played a significant role in Holocene reef formation in the northwest Pacific; however, coral mortality, caused by climate change, has recently been widely reported. Moreover, the decrease in key species abundance in present-day reefs has been more severe than that in any other species. These geological findings have important implications regarding the appropriate use of coral transplantation and decisions regarding the optimal location and size of marine protected areas.