Building damage characteristics based on surveyed data and fragility curves of the 2011 Great East Japan tsunami

A large amount of buildings was damaged or destroyed by the 2011 Great East Japan tsunami. Numerous field surveys were conducted in order to collect the tsunami inundation extents and building damage data in the affected areas. Therefore, this event provides us with one of the most complete data set among tsunami events in history. In this study, fragility functions are derived using data provided by the Ministry of Land, Infrastructure and Transportation of Japan, with more than 250,000 structures surveyed. The set of data has details on damage level, structural material, number of stories per building and location (town). This information is crucial to the understanding of the causes of building damage, as differences in structural characteristics and building location can be taken into account in the damage probability analysis. Using least squares regression, different sets of fragility curves are derived to demonstrate the influence of structural material, number of stories and coastal topography on building damage levels. The results show a better resistant performance of reinforced concrete and steel buildings over wood or masonry buildings. Also, buildings taller than two stories were confirmed to be much stronger than the buildings of one or two stories. The damage characteristic due to the coastal topography based on limited number of data in town locations is also shortly discussed here. At the same tsunami inundation depth, buildings along the Sanriku ria coast were much greater damaged than buildings from the plain coast in Sendai. The difference in damage states can be explained by the faster flow velocities in the ria coast at the same inundation depth. These findings are key to support better future building damage assessments, land use management and disaster planning.     

Fluid Inclusion Study and Opaque Mineral Assemblage at the Deep and Shallow Part of the Batu Hijau Porphyry Copper-gold Deposit, Sumbawa, Indonesia

The Batu Hijau deposit is the only porphyry type deposit in production in the Sunda‐Banda arc, Indonesia. This study discusses the reason for the localization of copper grade at the deep part of the deposit based on the observation of opaque mineral assemblage. In addition, the formation condition of quartz veins and opaque minerals is discussed on the basis of the fluid inclusion microthermometry. Samples were selected from drill holes SBD100, SBD168, SBD194, SBD254, and SBD257 to cover the wide vertical range. At the Batu Hijau deposit, quartz veins have been classified mainly into four types called A, B, C and D veins, and the A veins contain mainly bornite, often associated with digenite and chalcocite. In addition, magnetite occurs in A veins. However, at the deep part of the deposit, there are quartz veins associated with magnetite, but few copper sulfides such as bornite and chalcopyrite in quartz veins, as observed in SBD257. Quartz veins at depth in SBD257 have abundant magnetite and pyrite. Pyrite in quartz veins at depth in SBD257 mainly occur at the rim of magnetite grains or interstices between them. In quartz veins in SBD254, there are abundant copper sulfides such as bornite and chalcopyrite in spite of the depth. Bornite and chalcopyrite occur as inclusions in magnetite grains in quartz veins in SBD254. Pyrite which often occurs in low grade zone in quartz veins in SBD254 is also recognized at the rims of copper sulfides. This indicates that pyrite in SBD257 and SBD254 formed later than magnetite. On the other hand, blebs of bornite and chalcopyrite inclusions in magnetite grains, which are recognized in quartz veins in SBD168 at shallow high grade part, suggest that the hydrothermal fluid, from which magnetite was deposited also brought the copper sulfides such as bornite and chalcopyrite to the deep part of the Batu Hijau deposit. Therefore, it is concluded that initially the high grade ore zone extended to depth without localization. However due to the later overprinting hydrothermal activity, copper sulfides and magnetite were replaced or dissolved and pyrite was formed, resulting the low grade zone at the deep part of the deposit. Dissolution temperatures (Td) of halite obtained by from fluid inclusion microthermometry show significant differences between SBD168 and other drill holes. The high Td obtained in SBD168 may indicate larger volume of NaCl crystals in hydrothermal fluid at the time of entrapment of the fluid inclusions and formation of other opaque minerals such as magnetite and copper‐iron sulfides. It suggests that the ratio of vapor to brine is also higher at the shallow part of the deposit. The higher vapor to brine ratio may suggest a higher degree of boiling. Removal of vapor phase separated from brine during boiling increases the concentration of substances dissolved in the brine, and this will result in saturation, as evidenced by the salinity and NaCl saturation. The higher degree of boiling suggested by the higher vapor to brine ratio at shallow part may have increased the copper concentration in the brine that may have lead the saturation, resulted in the deposition of copper‐bearing minerals.     

Occurrence of Halogen-rich Phlogopite in Late Cenozoic Volcanic Rocks in the Japanese Arcs

Abstract. Halogen-rich phlogopite occurs in the groundmass of andesite and dacite lavas from Late Tertiary to Quaternary volcanoes associated with native sulfur and limonite deposits (Shiretoko-Iwozan, Hachimantai, Adatara, Omeshidake, Masaki) and hydrothermal ore deposits (Harukayama, Muineyama, Hishikari) in Japan. The F contents of the halogen-rich phlogopite range from 3.6 to 5.7 wt%, corresponding to atomic F/(F+C1+OH) ratios ranging from 0.45 to 0.69. On the other hand, the Cl contents of the halogen-rich phlogopite are around 0.2 wt%. The atomic Mg/(Mg+Fe) ratios range from 0.69 to 0.83.
The fluorine intercept value [IV(F)] defined by Munoz (1984) of the phlogopites ranges from 0.79 to 3.17, and the chlorine intercept value [IV(Cl)] ranges from -7.11 to -7.77. The observed IV(F) of the phlogopites broadly overlap the range of the IV(F) for biotites from porphyry copper deposits. On the other hand, the observed IV(Cl) are significantly lower than the IV(Cl) for biotites from porphyry copper deposits. Whereas the F contents of the phlogopite appear more prominent compared to the Cl contents, the calculation of halogen intercept values revealed that the phlogopites are enriched in Cl with respect to the element distribution effect of Mg-Fe substitution. Since the degree of Cl enrichment of the phlogopite is more significant compared to that of biotite in porphyry copper deposits, the phlogopites are considered to have formed under the condition of significantly high activity of halogens. Hydrothermal ore deposits may be formed in magmatic hydrothermal system associated with volcanoes where halogen-rich phlogopite is formed by hypersaline fluid.     

A numerical study of tropospheric ozone in the springtime in East Asia

The Models-3 Community Multi-scale Air Quality modeling system (CMAQ)coupled with the Regional Atmospheric Modeling System (RAMS)is applied to East Asia to study the transport and photochemical transformation of tropospheric ozone in March 1998．The calculated mixing ratios of ozone and carbon monoxide are compared with ground 1evel observations at three remote sites in Japan and it is found that the model reproduces the observed features very well．Examination of several high episodes of ozone and carbon monoxide indicates that these elevated levels are found in association with continental outflow,demonstrating the critical role of the rapid transport of carbon monoxide and other ozone precursors from the continental boundary layer．In comparison with available ozonesonde data,it is found that the model-calculated ozone concentrations are generally in good agreement with the measurements,and the stratospheric contribution to surface ozone mixing ratios is quite limited．     

Upper Cretaceous depositional environments and bivalve assemblages of far-east Asia: the Himenoura Group, Kyushu, Japan

The depositional environments and bivalve assemblages are determined for the Upper Cretaceous Hinoshima Formation of the Himenoura Group, Kamishima, Amakusa Islands, Kyushu, Japan. The Hinoshima Formation is characterized by a thick transgressive succession that varies from incised-valley-fill deposits to submarine slope deposits with high aggradation rates of depositional systems. The incised valley is filled with fluvial, bayhead delta, brackish-water estuary, and marine embayment deposits, and is overlain by thick slope deposits.Shallow marine bivalves are grouped into five fossil assemblages according to species composition: Glycymeris amakusensis (foreset beds of a bayhead delta), Nippononectes tamurai (foreset beds of a bayhead delta), Ezonuculana mactraeformis–Nucula formosa (central bay), Glycymeris amakusensis–Apiotrigonia minor (slope), and Inoceramus higoensis–Parvamussium yubarensis (slope). These bivalve assemblages all represent autochthonous and parautochthonous conditions except for a Glycymeris amakusensis–Apiotrigonia minor assemblage found in debris flow and slump deposits. The life habitats of these bivalves and the compositions of the assemblages are discussed in terms of the ecological history of fossil bivalves of the mid- to Late Cretaceous.     

Planform evolution of deltas with graded alluvial topsets: Insights from three‐dimensional tank experiments,geometric considerations and field applications

The profile of a river that conveys sediment without net deposition and net erosion is referred to as ‘graded’ with respect to vertical aggradation of the river segment. Three experimental series, designed in terms of the autostratigraphic view of alluvial grade, were conducted to clarify the diagnostic spatial behaviour of graded alluvial–deltaic rivers: an ‘R series’, which utilized a moving boundary setting with a stationary base level; an ‘F series’ in a fixed boundary setting with a stationary base level to produce ‘forced grade’; and an ‘M series’ in a moving boundary setting with constant base‐level fall to produce ‘autogenic grade.’ The results of the three experimental series, combined with geometrical modelling of the effects of basin water depth and other experimental data, suggest the following: (i) in a graded alluvial–deltaic system, lateral shifting and avulsing of active distributary channels are suppressed regardless of whether the downstream boundary of the deltaic system is fixed; (ii) in a delta with a downstream‐fixed boundary, the graded streams are stabilized within a valley that is incised in the axial part of the delta plain, whereby the alluvial plain outside the valley is abandoned and terraced; (iii) in moving boundary settings, the graded river simply extends basinward as a linearly elongated channel and lobe system without cutting a valley; and (iv) a modern forced‐graded alluvial river is most likely to be found in a valley incised into a fan delta in front of very deep water, and the stratigraphic signal of fossil autogenic‐graded rivers will be found in deltaic successions that accumulated in the outer to marginal areas of deltaic continental shelves during sea‐level falls. This renewed autostratigraphic view of alluvial grade suggests a thorough reconsideration of the conventional understanding that an alluvial river feeding a progradational delta is graded with a stationary base level.     

Gravity and S-wave modelling across the Jan Mayen Ridge,North Atlantic; implications for crustal lithology

The horizontal components from fourteen Ocean Bottom Seismometers deployed along four profiles focused along the western margin of the Jan Mayen microcontinent, North Atlantic, have been modelled with regard to S-waves, based on P-wave models obtained earlier. The seismic models have furthermore been constrained by 2D gravity modelling. High V _p/V _s-ratios (2.3–7.9) within the Cenozoic sedimentary section are attributed to significant porosities, whereas V _p/V _s-ratios in the order of 1.9–2.2 for the Mesozoic and Paleozoic sedimentary rocks indicate shale-dominated lithology throughout the area. The eastern side of the Jan Mayen Ridge is interpreted as a passive, volcanic margin, based on relatively high crustal V _p/V _s-ratios (1.9), whereas lower V _p/V _s-ratios (1.75–1.8) suggest the presence of intermediate composition crust and non-volcanic margin on the western side of the ridge. In the westernmost part of the Jan Mayen Basin, slightly increased upper mantle V _p/V _s-ratios may indicate some degree of serpentization of upper mantle peridotites.     

Algal Growth Potential and the limiting nutrient in Mikawa Bay

The Algal Growth Potential (AGP) of water samples collected off Gamagori in Mikawa Bay was measured from May 1978 through February 1979, and the limiting nutrient was determined using regression analysis and enrichment bioassays. The surface and bottom water samples had AGP that produced increments of chemical oxygen demand (COD) of 2.1 mg l^–1 and 3.1 mg l^–1, respectively, on average. These values ofCOD correspond to 46% and 97% of the average COD values of the raw water samples at the surface and bottom, respectively. Seasonal changes of AGP showed a close correlation with those of dissolved inorganic nitrogen (DIN) concentration. Enrichment bioassays showed that DIN was the most deficient nutrient. The DIN:phosphate-phosphorus (PO₄ ^3–-P) ratios and DIN: dissolved phosphorus (DP) ratios in the water samples were below the cellular N:P ratios of the natural algal populations. These results suggest that AGP was mainly limited by DIN concentration.     

Tidal currents influenced by topographic eddies in Uchiumi Bay

In the current record taken in Uchuimi Bay during summer in 1990, we find anomalous features that the tidal currents during spring and neap tides are quite different in both speed and direction, and the transition between them takes place suddenly. Relation between the variation of tidal current and the observed internal tide is examined, but they are poorly correlated. By examining the direction and phase of the current, it is inferred that these anomalous features are caused by the influence of topographic eddies formed perioidically in Uchiumi Bay.     

Time-series observation of dissolved inorganic carbon and nutrients in the northwestern North Pacific

Time-series measurements of dissolved inorganic carbon (DIC) and nutrient concentrations were conducted in the northwestern North Pacific from October 2002 to August 2004. Assuming that data obtained in different years represented time-series seasonal data for a single year, vertical distributions of DIC and nutrients showed large seasonal variabilities in the surface layer (∼100 m). Seasonal variabilities in normalized DIC (nDIC) and nitrate concentrations at the sea surface were estimated to be 81–113 μmol kg⁻¹ and 12.7–15.7 μmol kg⁻¹, respectively, in the Western Subarctic Gyre. The variability in nutrients between May and July was generally at least double that in other seasons. In the Western Subarctic Gyre, estimations based on statistical analyses revealed that seasonal new production was 39–61 gC m⁻² and tended to be higher in the southwestern regions or coastal regions. The seasonal new productions in the northwestern North Pacific were two or more times higher than in the North Pacific subtropical gyre and the northeastern North Pacific. It is likely that this difference is due to spatial variations in the concentrations of trace metals and the species of phytoplankton present. In addition, from estimations of surface pCO₂ it was verified that the Western Subarctic Gyre is a source of atmospheric CO₂ between February and May and a sink for CO₂ between July and October.