Dense gas in normal and active galaxies

Dense molecular medium plays essential roles in galaxies. As demonstrated by the tight and linear correlation between HCN(1–0) and FIR luminosities among star-forming galaxies, from very nearby to high-z ones, the observation of a dense molecular component is indispensable to understand the star formation laws in galaxies. In order to obtain a general picture of the global distributions of dense molecular medium in normal star-forming galaxies, we have conducted an extragalactic CO(3–2) imaging survey of nearby spiral galaxies using the Atacama Submillimeter Telescope Experiment (ASTE). From the survey (ADIoS; ASTE Dense gas Imaging of Star-forming galaxies), CO(3–2) images of M 83 and NGC 986 are presented. Emphasis is placed on the correlation between the CO(3–2)/CO(1–0) ratio and the star formation efficiency in galaxies. In the central regions of some active galaxies, on the other hand, we often find enhanced or overluminous HCN(1–0) emission. The HCN(1–0)/CO(1–0) and HCN(1–0)/HCO⁺(1–0) intensities are often enhanced up to ∼0.2–0.3 and ∼2–3, respectively. Such elevated ratios have never been observed in the nuclear starburst regions. One possible explanation for these high HCN(1–0)/CO(1–0) and HCN(1–0)/HCO⁺(1–0) ratios is X-ray induced chemistry in X-ray dominated regions (XDRs), i.e., the overabundance of the HCN molecule in the X-ray irradiated dense molecular tori. If this view is true, the known tight correlation between HCN(1–0) and the star-formation rate breaks in the vicinity of active nuclei. Although the interpretation of these ratios is still an open question, these ratios have a great potential for a new diagnostic tool for the energy sources of dusty galaxies in the ALMA era because these molecular lines are free from dust extinction.     

Primary Ore Mineral Assemblage and Fluid Inclusion Study of the Batu Hijau Porphyry Cu-Au Deposit, Sumbawa, Indonesia

Abstract. The Batu Hijau porphyry Cu‐Au deposit, Sumbawa Island, Indonesia, is associated with a tonalitic intrusive complex. The temperature‐pressure condition of mineralization at the Batu Hijau deposit is discussed on the basis of fluid inclusion microthermometry. Then, the initial Cu‐Fe sulfide mineral assemblage is discussed. Bornite and chalcopyrite are major copper ore minerals associated with quartz veinlets. The quartz veinlets have been classified into ‘A’ veinlets associated with bornite, digenite, chalcocite and chalcopyrite, ‘B’ veinlets having chalcopyrite bornite along vuggy center‐line, rare ‘C’ chalcopyrite‐quartz veinlets, and late ‘D’ veinlets consisting of massive pyrite and quartz (Clode et al., 1999). Copper and gold mineralization is associated with abundant ‘A’ quartz veinlets. Abundant fluid inclusions are found in veinlet quartz consisting mainly of gas‐rich inclusions and polyphase inclusions throughout the veinlet types. The hydrothermal activity occurred in temperature‐pressure conditions of aqueous fluid immiscibility into hypersaline brine and dilute vapor. The halite dissolution (Tm[halite]) and liquid‐vapor homogenization (Th) temperatures of the polyphase inclusions in veinlet quartz range from 270 to 472d?C and from 280 to 454d?C, respectively. The estimated salinity ranges from 36 to 47 wt% (NaCl equiv.). The apparent pressures lower than 300 bars are estimated to have been along the liquid‐vapor‐halite curve for the fluid inclusions having the Th lower than the Tm that trapped the brine saturated with halite, or at slightly higher pressure relative to liquid‐vapor‐halite curve for the fluid inclusions having the Th higher than the Tm that trapped the brine unsaturated with halite. The actual temperature and pressure during the hydrothermal activity at the Batu Hijau deposit are estimated to have been around 300d?C and 50 bars. At such temperature‐pressure conditions, the principal and initial Cu‐Fe sulfide mineral assemblages are thought to be chalcopyrite + bornite solid solution (bnss) for the chalcopyrite‐bearing assemblage, and chalcocite‐digenite solid solution and bnss for the chalcopyrite‐free assemblage.     

Wave-induced porewater pressure in a seabed with inhomogeneous permeability

We have developed an analytical treatment for the wave-induced response of a seabed with inhomogeneous permeability, by employing the boundary layer approximation. By assuming an exponential function for vertically distributed permeability, the inhomogeneous consolidation equation was formulated as Bessel's differential equation. Subsequently, we proposed some representative quantities for examining the effects of inhomogeneity of permeability. The main effects of inhomogeneity are that the boundary layer becomes thinner and the phase delay in the direction of depth becomes larger as the inhomogeneity becomes significant. In addition, it was shown that the boundary layer is properly evaluated by using the averaged permeability.     

Calibration and validation of the ocean color version-3 product from ADEOS OCTS

We present calibration and validation results of the OCTS’s ocean color version-3 product, which mainly consists of the chlorophyll-a concentration (Chl-a) and the normalized water-leaving radiance (_nL_w). First, OCTS was calibrated for the inter-detector sensitivity difference, offset, and absolute sensitivity using external calibration source. It was also vicariously calibrated using in-situ measurements for water (Chl-a and_nL_w) and atmosphere (optical thickness), which were acquired synchronously with OCTS under cloud-free conditions. Second, the product was validated using selected 17 in-situ Chl-a and 11 in-situ_nL_w measurements. We confirmed that Chl-a was estimated with an accuracy of 68% for Chl-a less than 2 mg/m³, and_nL_w from 94% (band 2) to 128% (band 4). Geometric accuracy was improved to 1.3 km. Stripes were significantly reduced by modifying the detector normalization factor as a function of input radiance.     

Correction of atmospheric effect on ADEOS/OCTS ocean color data: Algorithm description and evaluation of its performance

This paper first describes the atmospheric correction algorithm for OCTS visible band data used at NASDA/EOC. Sharing a basic structure with Gordon and Wang’s Sea WiFS algorithm, it uses 10 candidate aerosol models including the “Asian dust model” introduced in consideration of the unique feature of aerosols over the east Asian waters. Based on the observations at 670 and 865 nm bands, the algorithm selects a pair of aerosol models that account best for the observed spectral reflectances, and synthesizes the aerosol reflectance used for the atmospheric correction. Two different schemes for determining the value of the parameter for the aerosol model selection are presented and their anticipated estimation error is analyzed in terms of retrieved water reflectance at 443 nm. The results of our numerical simulation show that the standard deviation of the estimation error of the “weighted average” scheme is mostly within the permissible level of ±0.002, reducing the error by 18% on average compared to the “simple average” scheme. The paper further discusses the expected error under the old CZCS-type atmospheric correction, which assumes constant aerosol optical properties throughout the given image. Although our algorithm has a better performance than the CZCS algorithm, further analysis shows that the error induced by the assumption taken in the algorithm that the water-leaving radiance at 670 nm band is negligibly small may be large in high pigment concentration waters, indicating the necessity for future improvements.     

Degradation of lubricating oils by marine bacteria observed by quantitative mass spectrometry

Bacterial degradation of the hydrocarbons of lubricating oils was investigated by mass spectrometric analysis which gives both total amount and the composition of hydrocarbon types of residual oil. An unused lubricating oil, which mainly consisted of hydrocarbon types with only a small percentage ofn-alkanes, was degraded by marineBacillus sp. andPseudomonas sp. with 55 % and 25 % decreases in 10 days, respectively. Susceptibility of respective hydrocarbon types to biodegradation was in the following order: alkanes > non-condensed cycloalkanes, mono-aromatics > condensed cycloalkanes. A used lubricating oil of different brand showed a larger decrease than the unused oil. Both species of bacteria degraded large portions of alkane fraction of Arabian light crude oil.     

Mercury distribution in seawater in Minamata Bay and the origin of particulate mercury

Horizontal and vertical distributions of mercury were determined in seawater in Minamata Bay and Yatsushiro Sea. The concentrations of total and particulate mercury respectively ranged from 56–285 ng l^–1 and 2.1–506 ng l^–1. They were both highest in the inner most part of Minamata Bay where the sediment was most heavily polluted, and decreased with increasing distance from there. Vertically, an evident increase in concentration was observed near the bottom. A good agreement was found between the mercury content in suspended matter and that in fine sediment particles.These facts show that the particulate mercury is supplied mostly from the bottom sediment, and that it is spreading offshore with dispersing in seawater. This process would eventually result in the pollution of sediment in Yatsushiro Sea.     

Stem waves along vertical wall due to random wave incidence

This study investigates stem waves, propagating along a vertical wall, due to obliquely incident random waves through laboratory experiments and numerical simulations. Attention is paid to the difference or similarity between the stem waves due to periodic waves and random waves, the nonlinear and linear characteristics, and the effect of wave breaking on the evolution of stem waves. The following were found from this study: as the incident angle of waves become large or the nonlinearity of the incident waves become small, the significant stem wave height, normalized by the incident significant wave height, becomes large. This tendency is the same as that generated by the Stokes waves or cnoidal waves. However, regardless of the nonlinearity of incident waves, the width of stem waves is almost the same. This is a different point between the stem waves due to periodic and random waves. The wave breaking suppresses the growth of the stem waves.     

Molecular ecological study of <Emphasis Type="Italic">Siganus spinus</Emphasis> and <Emphasis Type="Italic">S. guttatus</Emphasis> from Okinawan waters based on mitochondrial DNA control region sequences

The mitochondrial DNA (mtDNA) control region was sequenced to examine the genetic variability and gene flow of juvenile Siganus spinus and S. guttatus. In total, 461 nucleotide sequences were obtained from 69 specimens of juvenile S. spinus from Okinawa Island and Ishigaki Island, in which 17 variable sites and 22 haplotypes were identified. Haplotype diversity (h) was high (0.9244 in Okinawa and 0.8984 in Ishigaki), whereas nucleotide diversity (π) was low (0.0063 in Okinawa and 0.0059 in Ishigaki). The two populations were not genetically distinct. Siganus guttatus, which do not form large schools at recruitment, in contrast S. spinus, were also analyzed by studying 152 individuals collected off Okinawa Island, Miyako Island, and Ishigaki Island. Of 476 nucleotide sequences, 50 were variable, and 42 haplotypes were identified. Genetic variability values were high (h = 0.8766 and π = 0.0151 in Okinawa; h = 0.9640 and π = 0.0192 in Miyako; h = 0.9161 and π = 0.0199 in Ishigaki). The Okinawa population was genetically isolated from the Miyako and Ishigaki populations. As a result, genetic diversity was high for each of these siganid populations despite their being target species for fisheries; however, the degree of inter-population gene flow was higher for S. spinus than S. guttatus, suggesting that these species exhibit different dispersal strategies.